CHEMICAL
ENGINEERING TRANSACTIONS - Vol. 35, 2013
Guest Editors: Petar Varbanov, Jirí Jaromír Kleme, Panos
Seferlis, Athanasios I. Papadopoulos, Spyros Voutetakis
Copyright © 2013, AIDIC Servizi S.r.l.,
ISBN 978-88-95608-26-6; ISSN 1974-9791
Table
of Contents & Authors Index
|
DOI
|
PART
1
|
|
Optimization-based Process Synthesis for Sustainable Power Generation | 1 |
Dowling A. W., Biegler L.T. | >DOI:
10.3303/CET1335001 |
Process
Integration for Sustainable Development
|
|
Cogeneration Improvement Based on Steam Cascade Analysis | 13 |
Sun L., Doyle S., Smith R. | >DOI:
10.3303/CET1335002 |
Total Site Heat Integration with Seasonal Energy Availability | 19 |
Liew P.Y., Wan Alwi S.R., Klemes J.J., Varbanov P.S., Manan Z.A. | >DOI:
10.3303/CET1335003 |
Heat Integration Across Plants Considering Distance Factor | 25 |
Wang Y., Wang W., Feng X. | >DOI:
10.3303/CET1335004 |
Water Allocation Network Synthesis Involving Reliability Analysis | 31 |
Du J., Chen J., Li J.L., Meng Q.W. | >DOI:
10.3303/CET1335005 |
Development of Innovative Methanol Synthesis Process Based on Self-heat Recuperation | 37 |
Kansha Y., Ishizuka M., Tsutsumi A. | >DOI:
10.3303/CET1335006 |
A Two-step Solution Strategy for the Synthesis of Pinched and Threshold Heat-integrated Process Water Networks | 43 |
Ibric N., Ahmetovic E., Kravanja Z. | >DOI:
10.3303/CET1335007 |
Modular Integrated Framework for Process Synthesis and Optimization Based on a Sequential Process Simulator | 49 |
Wang D., Feng X., Deng C. | >DOI:
10.3303/CET1335008 |
The Role of Process Synthesis in the Systematic Design of Energy Efficient Fossil Fuel Power Plants with CO2 Capture | 55 |
Anantharaman R., Jordal K., Berstad D., Gundersen T. | >DOI:
10.3303/CET1335009 |
Refinery Hydrogen Network Management with Key Factor Analysis | 61 |
Deng C., Li W., Feng X. | >DOI:
10.3303/CET1335010 |
Process Simulation Tools for the Assessment of Biorefinery Processes Intensification by Ultrasounds Technology | 67 |
Garcia A., Gonzalez Alriols M., Wukovits W., Friedl A., Labidi J. | >DOI:
10.3303/CET1335011 |
Dynamic Multi-objective Synthesis of Companies’ Renewable Biomass and Energy Supply-networks | 73 |
Kiraly A., Pahor B., Cucek L., Kravanja Z. | >DOI:
10.3303/CET1335012 |
Targeting Minimum Heat Transfer Area for Heat Recovery on Total Site | 79 |
Boldyryev S., Varbanov P.S., Nemet A., Kapustenko P., Klemes J.J. | >DOI:
10.3303/CET1335013 |
Optimisation of Pumped-hydro Storage System for Hybrid Power System Using Power Pinch Analysis | 85 |
Mohammad Rozali N.E., Wan Alwi S.R., Manan Z.A., Klemes J.J., Hassan M.Y. | >DOI:
10.3303/CET1335014 |
Process Intensification Alternatives in the Dme Production | 91 |
Kiss A.A., Suszwalak D.J.P.C., Ignat R. | >DOI:
10.3303/CET1335015 |
Multi-objective Regional Total Site Integration | 97 |
Cucek L., Varbanov P.S., Klemes J.J., Kravanja Z. | >DOI:
10.3303/CET1335016 |
Life Span Production Plant Optimisation Under Varying Economic Conditions | 103 |
Nemet A., Klemes J.J., Kravanja Z. | >DOI:
10.3303/CET1335017 |
Modeling and Simulation of a Membrane Reactor for the Low Temperature Methane Steam Reforming | 109 |
Kyriakides A.S., Ipsakis D., Voutetakis S., Papadopoulou S., Seferlis P. | >DOI:
10.3303/CET1335018 |
Optimization of Hybrid Renewable Power Generation Flowsheets Using Generic Structural and Temporal Models | 115 |
Giaouris D., Papadopoulos A.I., Ziogou C., Ipsakis D., Seferlis P., Papadopoulou S., Voutetakis S., Elmasides C. | >DOI:
10.3303/CET1335019 |
Optimization of a Membrane-based Oxidative Coupling of Methane Reactor Using Surface Response Methodology | 121 |
Patcharavorachot Y., Tiraset S., Saebea D., Arpornwichanop A. | >DOI:
10.3303/CET1335020 |
Enlarging the Product Portfolio of a Kraft Pulp Mill via Hemicellulose and Lignin Separation – Process Integration Studies in a Case Mill | 127 |
Lundberg V., Bood J., Nilsson L., Mahmoudkhani M., Axelsson E., Berntsson T. | >DOI:
10.3303/CET1335021 |
Retrofit of Heat Exchanger Networks for Optimising Crude Oil Distillation Operation | 133 |
Ochoa-Estopier L.M., Jobson M., Smith R. | >DOI:
10.3303/CET1335022 |
The Use of Reduced Models in the Optimization of Energy Integrated Processes | 139 |
Smith R., Ochoa-Estopier L.M., Jobson M. | >DOI:
10.3303/CET1335023 |
Strategy for Total Energy System Retrofit of a Chemical Plant | 145 |
Feng X., Liang C. | >DOI:
10.3303/CET1335024 |
Automatic Synthesis of Alternative Heat-integrated Water-using Networks | 151 |
Bao-Hong Li, Zhen-Zhen Ruan, Chuei-Tin Chang | >DOI:
10.3303/CET1335025 |
A Generalized Approach to Handle Heat Exchange Restrictions in Energy Targeting | 157 |
Morandin M. | >DOI:
10.3303/CET1335026 |
Performance Assessment and Afficiency of a Renewable Hydrogen Production Station Based on a Supervisory Control Methodology | 163 |
Ziogou C., Ipsakis D., Seferlis P., Bezergianni S., Papadopoulou S., Voutetakis S. | >DOI:
10.3303/CET1335027 |
A Techno-economic Analysis of Using Residual Top Gases in an Integrated Steel Plant | 169 |
Ghanbari H., Saxen H. | >DOI:
10.3303/CET1335028 |
Process Modification Potentials for Total Site Heat Integration | 175 |
Chew K.H., Wan Alwi S.R., Klemes J.J., Manan Z.A. | >DOI:
10.3303/CET1335029 |
Process Heat Integration Between Distillation Columns for Ethylene Hydration Process | 181 |
Pejpichestakul W., Siemanond K. | >DOI:
10.3303/CET1335030 |
Addressing Energy and Environmental Targets Through Combined Process Integration Techniques | 187 |
Mooney E., Semkov K., Adley C., Mooney C. | >DOI:
10.3303/CET1335031 |
Process Integration in Energy and Carbon Intensive Industries Through Exploitation of Optimization Techniques and Decision Support | 193 |
Porzio G.F., Colla V., Matarese N., Nastasi G., Branca T.A., Amato A., Fornai B., Vannucci M., Bergamasco M. | >DOI:
10.3303/CET1335032 |
Principle of Triple Bottom Line in the Integrated Development of Sustainable Products | 199 |
Mattioda R.A., Fernandes P.T., Detro S., Casela J.L., Canciglieri Junior O. | >DOI:
10.3303/CET1335033 |
Simulation of a Hybrid Reactive Extraction Unit. Biodiesel Synthesis | 205 |
Garcia Jurado M.B., Plesu V., Bonet Ruiz J., Bonet Ruiz A.E., Tuluc A., Llorens Llacuna J. | >DOI:
10.3303/CET1335034 |
Thermodynamic Analysis, Energy Integration and Flowsheet Improvement of a Methanol Absorption Acid Gas Removal Process | 211 |
Gatti M., Marechal F., Martelli E., Consonni S. | >DOI:
10.3303/CET1335035 |
Sustainable Remediation of a Closed Solid Waste Landfill Site: Development and Application of a Holistic Approach | 217 |
Roccaro P., Vagliasindi F.G.A. | >DOI:
10.3303/CET1335036 |
Energy
Saving Technology
|
|
Low Heat Power Generation System | 223 |
Matsuda K. | >DOI:
10.3303/CET1335037 |
Active Magnetic Regenerative Heat Circulator for Energy Saving in Thermal Process | 229 |
Kotani Y., Kansha Y., Tsutsumi A. | >DOI:
10.3303/CET1335038 |
Total Site Integration for Coke Oven Plant | 235 |
Ulyev L., Kapustenko P., Vasilyev M., Boldyryev S. | >DOI:
10.3303/CET1335039 |
Robust Model Predictive Control of Heat Exchanger Network | 241 |
Bakosova M., Oravec J. | >DOI:
10.3303/CET1335040 |
The Precise Definition of the Payload Tube Furnaces for Units of Primary Oil Refining | 247 |
Ulyev L., Kapustenko P., Melnykovskaya L., Nechyporenko D. | >DOI:
10.3303/CET1335041 |
Theoretical Potential to Convert Excess Heat Into Mechanical Work in the Finnish Industry | 253 |
Jarvinen T., Holmberg H., Ahtila P. | >DOI:
10.3303/CET1335042 |
Energy Intensive Process in Professional Laundry Service: Up-to-date Approach | 259 |
Masa V., Bobak P., Stehlik P., Kuba P. | >DOI:
10.3303/CET1335043 |
Energy Demand of Biofuel Production Applying Distillation and/or Pervaporation | 265 |
Nagy E., Boldyryev S. | >DOI:
10.3303/CET1335044 |
Effect of Different Gas Turbine on Integrated Gasification Poly-generation Plant with Methanol and Power Generation | 271 |
Chen P.C., Chiu H.M., Chyou Y.P. | >DOI:
10.3303/CET1335045 |
Exploring the Near-optimal Solution Space for the Synthesis of Distributed Energy Supply Systems | 277 |
Voll P., Hennen M., Klaffke C., Lampe M., Bardow A. | >DOI:
10.3303/CET1335046 |
A Data Reconciliation Based Approach to Accuracy Enhancement of Operational Data in Power Plants | 283 |
Dejanovic I., Halvorsen I., Skogestad S., Jansen H., Olujic Z. | >DOI:
10.3303/CET1335047 |
Applying Conduct – Metrical Method to Research of Foam Gypsum with Hemp Fibrous Reinforcement Drying Process | 289 |
Gross U., Iljins U., Skujans J., Gajevskis A. | >DOI:
10.3303/CET1335048 |
An Milp Model for Distributed Energy System Optimization | 295 |
Haikarainen C., Pettersson F., Saxen H. | >DOI:
10.3303/CET1335049 |
Energy Saving for Batch Distillation with Mechanical Heat Pumps | 301 |
Modla G., Lang P. | >DOI:
10.3303/CET1335050 |
Mathematical Modelling of the Steam Reforming of Toluene for Fuel Gas Production in a Fixed Bed Catalytic Reactor | 307 |
Oliveira A., Silva J. | >DOI:
10.3303/CET1335051 |
CO2
Minimisation and Mitigation
|
|
A Methodological Framework for Supply Chain Carbon Footprint Management | 313 |
Aivazidou E., Iakovou E., Vlachos D., Keramydas C. | >DOI:
10.3303/CET1335052 |
Kinetics Study and Simulation of CO2 Absorption Into Mixed Aqueous Solutions of Methyldiethanolamine and Diethanolamine | 319 |
Toro-Molina C., Bouallou C. | >DOI:
10.3303/CET1335053 |
A Decision Support Framework for Capturing the Impact of Energy Savings and Pollution Legislation on Supply Chain Network Design | 325 |
Mallidis I., Vlachos D., Iakovou E. | >DOI:
10.3303/CET1335054 |
Greek Lignite-fired Power Plants with CO2 Capture for the Electricity Generation Sector | 331 |
Kakaras E., Koumanakos A., Doukelis A. | >DOI:
10.3303/CET1335055 |
Energy Performance of CO2 Capture Processes: Interaction Between Process Design and Solvent | 337 |
Neveux T., Le Moullec Y., Corriou J.P., Favre E. | >DOI:
10.3303/CET1335056 |
Assessment of the Flue Gas Recycle Strategies on Oxy-coal Power Plants Using an Exergy-based Methodology | 343 |
Hagi H., Nemer M., Le Moullec Y., Bouallou C. | >DOI:
10.3303/CET1335057 |
Hydrodynamic-analogy-based Modelling of CO2 Capture by Aqueous Monoethanolamine | 349 |
Yazgi M., Kenig E. | >DOI:
10.3303/CET1335058 |
Integrated Low-temperature CO2 Capture from IGCC Power Plant by Partial Condensation and Separation of Syngas | 355 |
Berstad D., Anantharaman R., Neksa P. | >DOI:
10.3303/CET1335059 |
Kinetic Studies on Carbon Dioxide Capture Using Activated Carbon | 361 |
Rashidi N.A., Yusup S., Lam H.L. | >DOI:
10.3303/CET1335060 |
Assessment of Carbon Capture Options for Super-critical Coal-based Power Plants | 367 |
Cormos C.C., Cormos A.M., Agachi P.S. | >DOI:
10.3303/CET1335061 |
Lithium Silicate Pellets for CO2 Capture at High Temperature | 373 |
Puccini M., Seggiani M., Vitolo S. | >DOI:
10.3303/CET1335062 |
Multi-criteria Analysis of Material Selection in Order to Reduce of Environmental Impacts | 379 |
Culakova M., Vilcekova S., Katunska J., Kridlova Burdova E. | >DOI:
10.3303/CET1335063 |
Analysis of Environmental Aspects in High Energy Performance Family House - Case Study | 385 |
Vilcekova S., Sedlakova A., Kridlova Burdova E., Culakova M., Geletka V., Kapalo P. | >DOI:
10.3303/CET1335064 |
Functionalization of Poly(high Internal Phase Emulsion) with Amine for CO2 Capture | 391 |
Muchan P., Saiwan C., Demontigny D., Tontiwachwuthikul P. | >DOI:
10.3303/CET1335065 |
Biopolymer Modified with Piperazine-2- Carboxylic Acid for Carbon Dioxide Adsorption | 397 |
Saiwan C., Srisuwanvichien S., Tontiwachwuthikul P. | >DOI:
10.3303/CET1335066 |
Study of CO2 Adsorption Using Adsorbent Modified with Piperazine | 403 |
Kangwanwatana W., Saiwan C., Tontiwachwuthikul P. | >DOI:
10.3303/CET1335067 |
Effect of Organic Solvents on Separation of Heat Stable Salts (hsss) Generated During Carbon Dioxide Absorption Using Amine Solution | 409 |
Suppaibulsuka P., Saiwan C., Supap T. | >DOI:
10.3303/CET1335068 |
Effect of Amines on High Internal Phase Emulsion Adsorbents for Carbon Dioxide Adsorption | 415 |
Athipongarporn N., Saiwan C., Tontiwachwuthikul P. | >DOI:
10.3303/CET1335069 |
Dynamic Modeling of CO2 Capture by Calcium-looping Cycle | 421 |
Cormos A.M., Simon A. | >DOI:
10.3303/CET1335070 |
Modelling the Fluid Phase Behaviour of Multifunctional Alkanolamines and Carbon Dioxide Using the Saft-? Approach | 427 |
Chremos A., Forte E., Papaioannou V., Galindo A., Jackson G., Adjiman C. | >DOI:
10.3303/CET1335071 |
Development of a Solar-powered, Fuel-flexible Compact Steam Reformer: the Comethy Project | 433 |
Giaconia A., Turchetti L., Monteleone G., Morico B., Iaquaniello G., Shabtai K., Sheintuch M., Boettge D., Adler J., Palma V., Voutetakis S., Lemonidou A.A., Annesini M.C., den Exter M., Balzer H. | >DOI:
10.3303/CET1335072 |
Heat
Exchangers As Equipment and Integrated Items
|
|
Possibilities of Intensifying Heat Transfer in Heat Exchangers for High Temperature Applications | 439 |
Stehlik P., Jegla Z., Kilkovsky B. | >DOI:
10.3303/CET1335073 |
Experimental and Numerical Investigation on Shell-side Performance of Multilayer Spiral-wound Heat Exchangers | 445 |
Lu X., Du X., Zhang S., Zeng M., Wang Q.W. | >DOI:
10.3303/CET1335074 |
Evaluation of a 1eht Enhanced Heat Transfer Tube Bundle for Processes Involving Boiling | 451 |
Kukulka D., Smith R. | >DOI:
10.3303/CET1335075 |
Thermo-hydraulic Design of Solar Collector Networks for Industrial Applications | 457 |
Picon-Nunez M., Martinez-Rodriguez G., Fuentes-Silva A.L. | >DOI:
10.3303/CET1335076 |
Application of H2 and H8 Approaches Applied to the Robust Controller Design for a Heat Exchanger | 463 |
Vasickaninova A., Bakosova M. | >DOI:
10.3303/CET1335077 |
Thermal Analysis of Unconventional Process Condenser Using Conventional Software | 469 |
Paciska T., Jegla Z., Kilkovsky B., Reppich M., Turek V. | >DOI:
10.3303/CET1335078 |
Modified Criterion for Economic Efficiency Estimation of Heat Pumps | 475 |
Boldyryev S., Garev A., Ilunin O., Shamraev A., Selyakov O., Leshchenko O., Kapustenko P. | >DOI:
10.3303/CET1335079 |
Numerical Analysis of Plain Fin-and-oval-tube Heat Exchanger with Different Inlet Angles | 481 |
Chu W., Yu P., Ma T., Zeng M., Wang Q.W. | >DOI:
10.3303/CET1335080 |
The Modified Analogy of Heat and Momentum Transfers for Turbulent Flows in Channels of Plate Heat Exchangers | 487 |
Arsenyeva O., Tovazhnyanskii L.L., Kapustenko P., Demirskyy O. | >DOI:
10.3303/CET1335081 |
Dynamic Data Reconciliation in a Hot-oil Heat Exchanger for Validating Energy Consumption | 493 |
Singhmaneeskulchai P., Angsutorn N., Siemanond K. | >DOI:
10.3303/CET1335082 |
Integration
of Renewables, Biomass and Energy Conversion Technologies
|
|
A Process Integration Technique for Targeting and Design of Off-grid Hybrid Power Networks | 499 |
Chen C.L., Lai C.T., Lee J.Y. | >DOI:
10.3303/CET1335083 |
Study of Different Bio-processing Pathways in a Lignocellulosic Biorefinery by Process Simulation | 505 |
Garcia A., Egues I., Sanchez C., Barta Z., Labidi J. | >DOI:
10.3303/CET1335084 |
Different Integration Alternatives of Thermosolar Energy and Heat Pump in a Fish Canning Process | 511 |
Quijera J.A., Labidi J. | >DOI:
10.3303/CET1335085 |
Biogas Upgrading Techniques: State of Art Review in European Region | 517 |
Niesner J., Jecha D., Stehlik P. | >DOI:
10.3303/CET1335086 |
Thermo-economic Optimization of Integrated first and second Generation Sugarcane Ethanol Plant | 523 |
Ensinas A.V., Codina V., Marechal F., Albarelli J., Silva M.A. | >DOI:
10.3303/CET1335087 |
Supervisory Control and Unattended Operation of an Off-grid Hybrid Power Generation Station Including Hydrogen Storage | 529 |
Ziogou C., Elmasides C., Papadopoulou S., Voutetakis S. | >DOI:
10.3303/CET1335088 |
Renewable Energy Balancing with Thermal Grid Support | 535 |
Zwaenepoel B., Vansteenbrugge J., Vandoorn T., Van Eetvelde G., Vandevelde L. | >DOI:
10.3303/CET1335089 |
Modeling and Simulation of Methanation Catalytic Reactor for Renewable Electricity Storage | 541 |
Er-Rbib H., Bouallou C. | >DOI:
10.3303/CET1335090 |
Assessment of Direct Thermal Energy Storage Technologies for Concentrating Solar Power Plants | 547 |
Ravaghi-Ardebili Z., Manenti F., Corbetta M., Lima N.M.N., Zuniga Linan L., Papasidero D. | >DOI:
10.3303/CET1335091 |
Process Integration of Lignocellulosic Biomass Pre-treatment in the Thermo-chemical Production of F-T Fuels. Centralised Versus Decentralised Scenarios | 553 |
Peduzzi E., Boissonnet G., Haarlemmer G., Marechal F. | >DOI:
10.3303/CET1335092 |
Influence of Different Pretreatment Methods on Biomass Gasification and Production of Fischer-tropsch Crude Integrated with a Pulp and Paper Mill | 559 |
Isaksson J., Asblad A., Berntsson T. | >DOI:
10.3303/CET1335093 |
Hydrogen Production from Mixture of Biomass and Polyethylene Waste in Fluidized Bed Catalytic Steam Co-gasification Process | 565 |
Moghadam R.A., Yusup S., Lam H.L., Al Shoaibi A., Murni M. | >DOI:
10.3303/CET1335094 |
Techno-economic Energy Model for Low Carbon Business Parks | 571 |
Timmerman J., Deckmyn C., Vandevelde L., Van Eetvelde G. | >DOI:
10.3303/CET1335095 |
Integrated Biomass and Solar Town Concept for Smart Eco-village | 577 |
Hashim H., Ho W.S., Lim J.S., Macchietto S. | >DOI:
10.3303/CET1335096 |
Solar Energy and Biowaste Conversion Into H2 on Cuox/tio2 Nanocomposites | 583 |
Ampelli C., Passalacqua R., Genovese C., Perathoner S., Centi G., Montini T., Gombac V., Fornasiero P. | >DOI:
10.3303/CET1335097 |
Lightweight Composites Based on Rapidly Renewable Natural Resource | 589 |
Stevulova N., Cigasova J., Sicakova A., Junak J. | >DOI:
10.3303/CET1335098 |
Investigation of the Influence of Plant Capacity on the Economic and Ecological Performance of Cassava-based Bioethanol | 595 |
Lauven L.P., Liu B., Geldermann J. | >DOI:
10.3303/CET1335099 |
Analysis of the Electricity Generation Potential by Solar Photovoltaic Source in the State of Paraná – Brazil | 601 |
Tiepolo G.M., Canciglieri Junior O., Urbanetz Junior J. | >DOI:
10.3303/CET1335100 |
Systematic Analysis of Proton Electrolyte Membrane Fuel Cell Systems Integrated with Biogas Reforming Process | 607 |
Authayanun S., Aunsup P., Im-orb K., Arpornwichanop A. | >DOI:
10.3303/CET1335101 |
Experimental Study of a Single Particle Reactor at Combustion and Pyrolysis Conditions | 613 |
Houshfar E., Wang L., Vaha-Savo N., Brink A., Lovas T. | >DOI:
10.3303/CET1335102 |
Estimation of the Potential for Low Cost Solid Fuels of Selected Areas in Hungary and Greece | 619 |
Karlopoulos E., Grammelis P., Christidou M., Chovan T., Varbanov P.S., Klemes J.J. | >DOI:
10.3303/CET1335103 |
PART
2
|
|
Operational
Research, Supply Chain Management and Education
|
|
A Mathematical Programming Approach to the Optimal Long-term National Energy Planning | 625 |
Koltsaklis N.E., Dagoumas A.S., Kopanos G.M., Pistikopoulos E.N., Georgiadis M.C. | >DOI:
10.3303/CET1335104 |
Biomass Demand-resources Value Targeting | 631 |
Lam H.L., Lim C.H. | >DOI:
10.3303/CET1335105 |
Optimizing the Operation of a District Heating System | 637 |
Olofsson D., Bellqvist D., Karlsson J., Johansson M. | >DOI:
10.3303/CET1335106 |
A Location-routing Approach to Optimal Sludge Management | 643 |
Solisio C., Dovi V. | >DOI:
10.3303/CET1335107 |
Investigating the Causalities for Cleaner and Affordable Electricity Production Mix: a System Dynamic Methodological Approach | 649 |
Tziogas C., Georgiadis P. | >DOI:
10.3303/CET1335108 |
Note on the Development of Sustainable Supply Chain Strategy | 655 |
Deutsch N., Dravavolgyi T., Rideg A. | >DOI:
10.3303/CET1335109 |
Sustainable Supply Network Design Through Optimisation with Clustering Technique Integration | 661 |
Ng W.P.Q., Lam H.L. | >DOI:
10.3303/CET1335110 |
The Role of Leadership in Knowledge Engineering Systems and Neural Networks to Establish E-government | 667 |
Al-Dujaili M.A.A. | >DOI:
10.3303/CET1335111 |
Use of a Web-based Modeling Environment in the Education of Process Engineers | 673 |
Merchan V.A., Kraus R., Wozny G. | >DOI:
10.3303/CET1335112 |
E-learning as Supporting Tool for Cooperation in the Field of Process, Energy and Mechanical Engineering on International Level | 679 |
Smejkal Q., Pavlas M., Skydanek L., Amann G., Reppich M. | >DOI:
10.3303/CET1335113 |
Time-on-stream Stability of New Catalysts for Low-temperature Steam Reforming of Biogas | 685 |
Turchetti L., Monteleone G., Giaconia A., Sau S., Palma V., Castaldo F., Lemonidou A.A., Angeli S.D. | >DOI:
10.3303/CET1335114 |
Clean
Technologies - Low Emissions Technologies
|
|
A Multi-level Mathematical Model of the CO Catalytic Conversion Process | 691 |
Ved O.V., Seferlis P., Kapustenko P. | >DOI:
10.3303/CET1335115 |
Flue Gas Cleaning by High Energy Electron Beam – Enhancement Effects Due to Water Droplets Generation | 697 |
Gogulancea V., Lavric V. | >DOI:
10.3303/CET1335116 |
CO2 Emission Reduction in the Cement Industry | 703 |
Mikulcic H., Vujanovic M., Markovska N., Filkoski R., Ban M., Duic N. | >DOI:
10.3303/CET1335117 |
Permeable Adsorbing Barrier for Groundwater Protection from Single-compounds and Multicomponent Contamination by Chlorinated Organic Compounds | 709 |
Bortone I., Di Nardo A., Di Natale M., Erto A., Musmarra D. | >DOI:
10.3303/CET1335118 |
Techno-economic Assessment of Polymeric, Ceramic and Metallic Membranes Integration in an Advanced IGCC Process for H2 Production and CO2 Capture | 715 |
Koutsonikolas D., Kaldis S.P., Pantoleontos G.T., Zaspalis V.T., Sakellaropoulos G.P. | >DOI:
10.3303/CET1335119 |
Effect of the Type of Impellers on Mixing in an Electrochemical Reactor | 721 |
Mollinedo H., Ramirez J., Huerta O., Mendoza V.X., Martinez S.A. | >DOI:
10.3303/CET1335120 |
Optimal CuFe2O4 Load for MW Susceptible Catalysed DPF | 727 |
Palma V., Ciambelli P., Meloni E., Sin A. | >DOI:
10.3303/CET1335121 |
Aftercooler for Efficiency Improvement of Decarbonizing Steam Generator | 733 |
Kupka D., Kolonicny J. | >DOI:
10.3303/CET1335122 |
Use of Tg-dsc-ms and Gas Analyzer Data to Investigate the Reaction of CO2 and So2 with Ca(oh)2 at Low Temperature | 739 |
Renedo M.J., Pesquera C., Gonzalez F., Fernandez J. | >DOI:
10.3303/CET1335123 |
Modernization of Unit for Elimination of Vocs by Catalytic Oxidation | 745 |
Jecha D., Martinec J., Brummer V., Stehlik P., Lestinsky P. | >DOI:
10.3303/CET1335124 |
A New Solar Reactor Aperture Mechanism Coupled with Heat Exchanger | 751 |
Menon A.K., Farid A., Ozalp N. | >DOI:
10.3303/CET1335125 |
Extraction of Copper from Aqueous Solutions Using Sodium Diethyldithiocarbamate as the Extracting Agent | 757 |
Meterfi S., Meniai A.H. | >DOI:
10.3303/CET1335126 |
Sustainable
Processing and Production
|
|
Emission Free Sulfur Recovery Process Development with Modular Mini-plants in Industrial Plant Bypass | 763 |
Guenther R.M., Schoneberger J.C., Thielert H., Wozny G. | >DOI:
10.3303/CET1335127 |
Qualitative Analysis Based Reaction Mechanism Identification | 769 |
Varga T. | >DOI:
10.3303/CET1335128 |
Implementation of Heat Integration for Efficient Process Design of Direct Adipic Acid Synthesis in Flow | 775 |
Vural Gursel I., Wang Q., Noel T., Hessel V. | >DOI:
10.3303/CET1335129 |
Life Cycle Assessment of Remediation Alternatives for Dredged Sediments | 781 |
Puccini M., Seggiani M., Vitolo S., Iannelli R. | >DOI:
10.3303/CET1335130 |
Assessment and Control of Environmental Performance of Bus Transit Operators: Three Cases in a Mid-sized City | 787 |
Sellitto M., Borchardt M., Pereira G.M., Bubicz M.E. | >DOI:
10.3303/CET1335131 |
Perception of Users on the Environmental Impact Caused by Public Transport Operation | 793 |
Sellitto M., Borchardt M., Pereira G.M., Sauer M.B. | >DOI:
10.3303/CET1335132 |
Optimised Storage and Energy Efficiency Concepts in Industries, Commerce and District Heating Business Based on Tool Soco – Model and Measures Identified | 799 |
Fluch J., Brunner C., Muster-Slawitsch B., Moser C., Schranzhofer R., Heimrath R. | >DOI:
10.3303/CET1335133 |
Productivity and Tensile Endurance Determination of Hemp Fiber | 805 |
Adamovics A., Kakitis A. | >DOI:
10.3303/CET1335134 |
Correlation Study of Safety, Health and Environmental Properties at Inherent Level: Benzene Synthesis Routes | 811 |
Alhamdani Y., Hassim M.H. | >DOI:
10.3303/CET1335135 |
Waste
Minimisation, Processing and Management
|
|
The Logistic Model for Decision Making in Waste Management | 817 |
Somplak R., Prochazka V., Pavlas M., Popela P. | >DOI:
10.3303/CET1335136 |
Evaluation of Sewage Sludge Co-incineration in the Existing Heating Plant Or Power Plant from Emission Production Point of View | 823 |
Fryba L., Bebar L., Tous M. | >DOI:
10.3303/CET1335137 |
Mathematical Modelling for the Adsorption Process of CO2 in Nanopores of Catalytic Particles in a Fixed Bed Reactor Using Numeral Inverse Laplace Transform | 829 |
Silva J.D, Oliveira C.C. | >DOI:
10.3303/CET1335138 |
Remobilization of Trivalent Chromium and the Regeneration of in Situ Permeable Reactive Barriers During Operation | 835 |
Kaimbi L.A., Chirwa E.M.N. | >DOI:
10.3303/CET1335139 |
Environmental Assessment of Fly Ash Concrete | 841 |
Ondova M., Stevulova N. | >DOI:
10.3303/CET1335140 |
Nimo/hbeta as Catalysts with Dual Functions Beneficial to Waste Tyre Pyrolysis | 847 |
Piyawongpinyo Y., Jitkarnka S. | >DOI:
10.3303/CET1335141 |
Bacterial Elimination of Sulphates from Mine Waters | 853 |
Luptakova A., Kotulicova I., Macingova E., Jencarova J. | >DOI:
10.3303/CET1335142 |
Adsorption of 2-chlorophenol Onto Sewage Sludge Based Adsorbent: Equilibrium and Kinetic Study | 859 |
Bousba S., Meniai A.H. | >DOI:
10.3303/CET1335143 |
Leaching of Heavy Metals from Contaminated Sediment | 865 |
Balintova M., Pavlikova P., Holub M., Petrilakova A. | >DOI:
10.3303/CET1335144 |
Life Cycle Assessment of Bottom Ash Management from a Municipal Solid Waste Incinerator (mswi) | 871 |
Margallo M., Aldaco R., Irabien A. | >DOI:
10.3303/CET1335145 |
Thermal
Treatment of Waste Including Waste to Energy
|
|
Improving Calculation of Lower Heating Value of Waste by Data Reconciliation – Analysis and Evaluation | 877 |
Tous M., Fryba L., Pavlas M. | >DOI:
10.3303/CET1335146 |
Co-pyrolysis of Biomass and Plastics Waste: a Modelling Approach | 883 |
Oyedun A.O., Gebreegziabher T., Hui C.W. | >DOI:
10.3303/CET1335147 |
Waste to Energy for Small Cities: Economics Versus Carbon Footprint | 889 |
Ng W.P.Q., Varbanov P.S., Klemes J.J., Hegyhati M., Bertok B., Heckl I., Lam H.L. | >DOI:
10.3303/CET1335148 |
Use of Renewables in Rural Municipalities’ Integrated Energy Systems | 895 |
Kostevsek A., Cizelj L., Petek J., Cucek L., Varbanov P.S., Klemes J.J., Pivec A. | >DOI:
10.3303/CET1335149 |
Waste-to-energy Modelling – Energy Efficiency Versus Minimized Environmental Impact | 901 |
Kropac J., Ferdan T., Pavlas M. | >DOI:
10.3303/CET1335150 |
Mobile Thermocatalytic Waste Processing Complex | 907 |
Tovazhnyanskii L.L., Ved V.E., Koshchii V.A., Rovenskii A.I., Krasnokutskii E.V. | >DOI:
10.3303/CET1335151 |
Batch,
Dynamic, flexible and sustainable plant operation
|
|
Combining Multi-parametric Programming and Nmpc for the Efficient Operation of a Pem Fuel Cell | 913 |
Ziogou C., Georgiadis M.C., Pistikopoulos E.N., Papadopoulou S., Voutetakis S. | >DOI:
10.3303/CET1335152 |
Operational Flexibility in Pulp Mill Steam Production at Off-design Heat Loads | 919 |
Svensson E., Berntsson T. | >DOI:
10.3303/CET1335153 |
Comparison of Conventional and Middle Vessel Batch Reactive Distillation Column: Application to Hydrolysis of Methyl Lactate to Lactic Acid | 925 |
Edreder E.A., Mujtaba I.M., Emtir M. | >DOI:
10.3303/CET1335154 |
Historical Process Data Based Energy Monitoring - Model Based Time-series Segmentation to Determine Target Values | 931 |
Abonyi J., Kulcsar T., Balaton M., Nagy L. | >DOI:
10.3303/CET1335155 |
Optimization of Pid Controller Parameters in the Case of Batch Styrene Suspension Polymerization | 937 |
Palau G.R., Lavric V. | >DOI:
10.3303/CET1335156 |
Heat Exchanger Network Synthesis for Batch Processes by Involving Heat Storages | 943 |
Du J., Yang P., Li J.L., Liu L.L., Meng Q.W. | >DOI:
10.3303/CET1335157 |
A New Batch Extractive Distillation Operational Policy for Methanol Recovery | 949 |
Hegely L., Lang P., Kovacs G. | >DOI:
10.3303/CET1335158 |
Analysis and Implementation of a Plant-wide Control System for an Lpg Reforming-fuel Cell Power System | 955 |
Ipsakis D., Papadopoulou S., Voutetakis S., Seferlis P. | >DOI:
10.3303/CET1335159 |
A Svm Gray-box Model for a Solid Substrate Fermentation Process | 961 |
Acuna G., Gonzalez J., Curilem M., Cubillos F. | >DOI:
10.3303/CET1335160 |
Off-cut Recycle for Batch and Batch Extractive Distillation Separation of a Multicomponent Azeotropic Mixture | 967 |
Hegely L., Lang P., Gerbaud V. | >DOI:
10.3303/CET1335161 |
Potential Impacts on the Energy System at the Integrated Steelwork by Changing Injection Coal Types to the Blast Furnace | 973 |
Orre J., Wang C., Larsson J., Olsson E. | >DOI:
10.3303/CET1335162 |
Online Monitoring of Toc Contaminations in Clean-in-place Processes for Optimized Process Control, Increased Process Efficiency and Quality | 979 |
Siegmann-Hegerfeld T., Genner A., Brandstetter M., Miltner M., Lendl B., Harasek M. | >DOI:
10.3303/CET1335163 |
CFD
and Numerical Heat Transfer
|
|
Mathematical Modelling of Grate Combustion: Bed and Freeboard Coupling Issues | 985 |
Jurena T., Hajek J. | >DOI:
10.3303/CET1335164 |
Assesesment of the Effect of Dual Impeller Alignment on the Heat Transfer Coefficient in Stirred Tanks | 991 |
Ramirez-Gomez R., Martinez-Delgadillo S., Garcia-Cortes D., Mollinedo-Ponce H.R., Huerta-Chavez O., Ramirez-Munoz J. | >DOI:
10.3303/CET1335165 |
CFD Investigation of Heat Transfer and Flow Patterns in Tube Side Laminar Flow and the Potential for Enhancement | 997 |
Osley W.G., Droegemueller P., Ellerby P. | >DOI:
10.3303/CET1335166 |
Sustainable
Biofuel Production
|
|
Integration of Biohydrogen Production with Heat and Power Generation from Biomass Residues | 1003 |
Wukovits W., Drljo A., Hilby E., Friedl A. | >DOI:
10.3303/CET1335167 |
Optimal Design of Solar Assisted Hydrothermal Gasification for Microalgae to Synthetic Natural Gas Conversion | 1009 |
Mian A., Ensinas A.V., Ambrosetti G., Marechal F. | >DOI:
10.3303/CET1335168 |
Glycerin Revalorization Using Anaerobic Digestion of Organic Waste | 1015 |
Rafecas Rahuet A., Plesu V., Bonet Ruiz J., Bonet Ruiz A.E., Llorens Llacuna J. | >DOI:
10.3303/CET1335169 |
Bioethanol from Brewer’s Spent Grains: Acid Pretreatment Optimization | 1021 |
Caetano N.S., Moura R.F., Meireles S., Mendes A.M., Mata T.M. | >DOI:
10.3303/CET1335170 |
Sustainable Production of Bioparaffins | 1027 |
Hancsok J., Eller Z., Polczmann G., Varga Z. | >DOI:
10.3303/CET1335171 |
Double Substrate Limitation Model for the Experimental Scale-up of Succinic Acid Production from Biorefinery Glycerol | 1033 |
Rigaki A., Webb C., Theodoropoulos C. | >DOI:
10.3303/CET1335172 |
Evaluation of Sorghum Biorefinery Concepts for Energy and Bioethanol Production | 1039 |
Weinwurm F., Drljo A., Theuretzbacher F., Bauer A., Friedl A. | >DOI:
10.3303/CET1335173 |
Study of Orange Bagasse Digestibility by Chemical Pretreatments | 1045 |
Silva K.A., Godoy P.H.M., Cardoso J., Mendes T.P.P., Seolatto A.A., Freitas F.F. | >DOI:
10.3303/CET1335174 |
Opportunities for Heat Integration of Biomass-based Fischer-tropsch Crude Production at Scandinavian Kraftliner Mill Sites | 1051 |
Ljungstedt H., Pettersson K., Harvey S. | >DOI:
10.3303/CET1335175 |
Production of Jet Fuel from Renewable Source Material | 1057 |
Eller Z., Varga Z., Hancsok J. | >DOI:
10.3303/CET1335176 |
Potential of Spent Coffee Grounds for Biodiesel Production and Other Applications | 1063 |
Caetano N.S., Silva V.F.M., Melo A.C., Mata T.M. | >DOI:
10.3303/CET1335177 |
Energy Integration of Bioethanol Production Process Topology from Microalgae Biomass: Evaluation of Sscf, Ssf, Acid Hydrolysis and Product Purification Alternatives | 1069 |
Gonzalez-Delgado A.D., Peralta-Ruiz Y., Pardo Y., Kafarov V. | >DOI:
10.3303/CET1335178 |
Screening of Sustainable Biodiesel Production Pathways During Process Research and Development (R&D) Stage Using Fuzzy Optimization | 1075 |
Liew W.H., Hassim M.H., Ng D.K.S. | >DOI:
10.3303/CET1335179 |
Fractionation and Characterization of Insolubles Formed in Palm Oil Biodiesel | 1081 |
Plata V., Serrano M., Tiria K., Romero Bohorquez A.R., Kafarov V., Gauthier-Maradei P., Castillo E. | >DOI:
10.3303/CET1335180 |
Industrial
& Experimental Studies
|
|
Research About the Method of Synthetizing N,n-dimethyl-1,3-propanediamine Continuously | 1087 |
Meng Q.W., Deng C., Li Y., Du J. | >DOI:
10.3303/CET1335181 |
Kinetic Study of Transesterification of Methyl Acetate with Isobutanol Catalyzed by the Dissociation of Sodium hydrogen Sulphate in Alcoholic Media | 1093 |
Vega Rodriguez A., Plesu V., Calvet Tarragona A., Bonet Ruiz J., Bonet Ruiz A.E., Llorens Llacuna J. | >DOI:
10.3303/CET1335182 |
Energy Consumption Versus Antioxidant Activity of Pressurized Fluid Extracts from Pfaffia Glomerata Roots | 1099 |
Santos D.T., Vardanega R., Albarelli J.Q, Ensinas A.V., Marechal F., Meireles M.A. | >DOI:
10.3303/CET1335183 |
Power Grid Simulation Model for Long Term Operation Planning | 1105 |
Zabojnik J., Dvorak M. | >DOI:
10.3303/CET1335184 |
Isobaric Vapor Liquid Equilibrium at 101.3 Kpa for the Binary Mixtures 2-methyl-2-butene / Methanol and Isopentane / Methanol | 1111 |
Bernabeu Diaz M., Plesu V., Bonet Ruiz J., Bonet Ruiz A.E., Llorens Llacuna J. | >DOI:
10.3303/CET1335185 |
Inert Substances and Explosion Limits of Hybrid Mixtures | 1117 |
Serafin J., Mynarz M., Lepik P., Drgacova J. | >DOI:
10.3303/CET1335186 |
The Study of Zeolite Based Cement Composites in Aggressive Environment | 1123 |
Estokova A., Kovalcikova M. | >DOI:
10.3303/CET1335187 |
Isobaric Vapor Liquid Equilibrium at 101.3 Kpa for the Binary Mixtures 2-methyl-2-butene / Tame and 2-methyl-1-butene / Tame | 1129 |
Bernabeu Diaz M., Plesu V., Bonet Ruiz J., Bonet Ruiz A.E., Llorens Llacuna J. | >DOI:
10.3303/CET1335188 |
Experimental Investigations of Effervescent Atomization Using Non-intrusive Techniques | 1135 |
Broukal J., Hajek J., Sojka P.E. | >DOI:
10.3303/CET1335189 |
Nutrient Leaching from Reservoir Bottom Sediments | 1141 |
Junakova N., Balintova M. | >DOI:
10.3303/CET1335190 |
Experimental Study on the Influence of Oxygen Fraction in the Combustion Air on the Combustion Characteristics | 1147 |
Belohradsky P., Skryja P. | >DOI:
10.3303/CET1335191 |
Heat Flux Measurement Methods for Process Furnaces – a Case Study | 1153 |
Vondal J., Hajek J. | >DOI:
10.3303/CET1335192 |
Testing of Zeolite and Kaolin for Preventing Ash Sintering and Fouling During Biomass Combustion | 1159 |
Wang L., Becidan M., Skreiberg O. | >DOI:
10.3303/CET1335193 |
Analysis, Quantitative Estimates and Methods for Reducing of the Maldistribution Created from Gas Distribution Devices for Column Apparatuses | 1165 |
Petrova T., Darakchiev S., Vaklieva-Bancheva N., Popov R. | >DOI:
10.3303/CET1335194 |
Industrial
Application & Optimal Design
|
|
A Derivative Method to Minimising Total Cost in Heat Exchanger Networks Through Optimal Area Allocation | 1171 |
Walmsley T.G., Walmsley M.R.W., Morrison A.S., Atkins M.J., Neale J.R. | >DOI:
10.3303/CET1335195 |
Generalized Framework for the Optimal Design of Solvent-based Post-combustion CO2 Capture Flowsheets | 1177 |
Damartzis T., Papadopoulos A.I., Seferlis P. | >DOI:
10.3303/CET1335196 |
Integration of Solar Heating Into Heat Recovery Loops Using Constant and Variable Temperature Storage | 1183 |
Walmsley M.R.W., Walmsley T.G., Atkins M.J., Neale J.R. | >DOI:
10.3303/CET1335197 |
Heat Transfer Intensified Techniques for Retrofitting Heat Exchanger Networks in Practical Implementation | 1189 |
Pan M., Bulatov I., Smith R. | >DOI:
10.3303/CET1335198 |
Development of Modified Plug-flow Furnace Model for Identification of Burner Thermal Behavior | 1195 |
Jegla Z. | >DOI:
10.3303/CET1335199 |
Low Temperature Methane Steam Reforming: Catalytic Activity and Coke Deposition Study | 1201 |
Angeli S.D., Monteleone G., Giaconia A., Lemonidou A.A. | >DOI:
10.3303/CET1335200 |
Best Practices for Preparation of Ghg Inventory for Industrial Processes | 1207 |
Grncarovska T.O., Poposka E., Zdraveva P., Markovska N. | >DOI:
10.3303/CET1335201 |
A Data Reconciliation Based Approach to Accuracy Enhancement of Operational Data in Power Plants | 1213 |
Jiang X., Liu P., Li Z. | >DOI:
10.3303/CET1335202 |
Energy Efficiency Improvement Through Technology Optimisation and Low Grade Heat Recovery – Industrial Application | 1219 |
Semkov K., Mooney E., Connolly M., Adley C. | >DOI:
10.3303/CET1335203 |
Optimal Swro Network Synthesis and Design Assessment with Water Quality Insights | 1225 |
Alnouri S., Linke P. | >DOI:
10.3303/CET1335204 |
A Methodology for Creating Sequential Multi-period Base-case Scenarios for Large Data Sets | 1231 |
Bungener S., Van Eetvelde G., Marechal F. | >DOI:
10.3303/CET1335205 |
Conceptual Design of a Natural Gas-based Integrated Industry Park | 1237 |
Chen C., Ross W. | >DOI:
10.3303/CET1335206 |
Energy-process Integration of the Gas-cooled/water-cooled Fixed-bed Reactor Network for Methanol Synthesis | 1243 |
Manenti F., Leon Garzon A.R., Bozzano G. | >DOI:
10.3303/CET1335207 |
Intensifying Air Separation Units | 1249 |
Manenti F., Rossi F., Croce G., Grottoli M.G., Altavilla M. | >DOI:
10.3303/CET1335208 |
Investigation of Heat Exchanger Network Flexibility of Distillation Unit for Processing Different Types of Crude Oil | 1255 |
Varga Z., Danics N. | >DOI:
10.3303/CET1335209 |
Fiabilist and Economic Approaches to Optimization of the Renewal of Hydrocarbons Transporting Pipelines | 1261 |
Abdelbaki N., Gaceb M., Bouali E., Bettayeb M., Bouzid R. | >DOI:
10.3303/CET1335210 |
Safety Assessment Curve (sac) for Inherent Safety Assessment in Petrochemical Industry | 1267 |
Ahmad S.I., Hashim H., Hassim M.H., Srinivasan R. | >DOI:
10.3303/CET1335211 |
Temperature Effect on the Interaction Parameters of Gc-nrtl Model Using the Genetic Algorithm | 1273 |
Bouneb N., Meniai A.H. | >DOI:
10.3303/CET1335212 |
Breaking Azeotropes by Azeotropic and Extractive Distillation in a Dividing-wall Column | 1279 |
Kiss A.A., Suszwalak D.J.P.C., Ignat R.M. | >DOI:
10.3303/CET1335213 |
CFD Modelling of Hydrodynamics and Heat Transfer in Channels of a PHE | 1285 |
Stogiannis I.A., Paras S.V., Arsenyeva O.P., Kapustenko P.O. | >DOI:
10.3303/CET1335214 |
Comparative Analysis of Environmental Performance of Building Materials Towards Sustainable Construction | 1291 |
Porhincák M., Eštoková A. | >DOI:
10.3303/CET1335215 |
Modelling of Crude Oil Bubble Point Pressure and Bubble Point Oil Formation Volume Factor Using Artificial Neural Network (ann) | 1297 |
Cuptasanti W., Torabib F., Saiwan C. | >DOI:
10.3303/CET1335216 |
Effect of Domestic Power Plants to the Low Voltage Transformer Areas from the Nonlinear Distortion Point of View | 1303 |
Görbe P., Magyar A., Fodor A., Hangos K.M. | >DOI:
10.3303/CET1335217 |
Power Quality Management of LED Light Sources in Frequency Domain | 1309 |
Görbe P., Magyar A., Csuti P. | >DOI:
10.3303/CET1335218 |
Organophilic Pervaporation of Butanol from an Aqueous Solution with POMS | 1315 |
Rom A., Esteve D., Friedl A. | >DOI:
10.3303/CET1335219 |
Steam Gasification Process of Chlorine-rich Shredder Granules: Experiments and Flow-sheeting Modelling for Process Evaluation and Scale-up | 1321 |
Kappes M., Porzio G.F., Colla V., Vannucci M., Krumm W. | >DOI:
10.3303/CET1335220 |
CFD Models in the Development of Electrical Waste Recycling Technologies | 1327 |
Egedy A., Fogarasi S., Varga T., Imre-Lucaci A., Chován T. | >DOI:
10.3303/CET1335221 |
Profile of Aromatic Intermediates of Titanium Dioxide Mediated Degradation of Phenol | 1333 |
Bamuza-Pemu E.E., Chirwa E.M.N. | >DOI:
10.3303/CET1335222 |
An Attempt on Using a Regenerated Commercial Nimos/al2o3 as a Catalyst for Waste Tyre Pyrolysis | 1339 |
Saeng-arayakul P., Jitkarnka S. | >DOI:
10.3303/CET1335223 |
Investigation of Alternative Reducing Agent Injection into the Raceway of Blast Furnaces Using CFD | 1345 |
Maier C., Jordan C., Harasek M.E., Feilmayr C, Thaler C. | >DOI:
10.3303/CET1335224 |
Motor Fuel Purpose Hydrogenation of Used Cooking Oils | 1351 |
Solymosi P., Eller Z., Hancsók J. | >DOI:
10.3303/CET1335225 |
Determination of the Gas Composition Effect in Carbon Dioxide Emission at Refinery Furnaces | 1357 |
Saavedra J., Merino L., Kafarov V. | >DOI:
10.3303/CET1335226 |
New Retrofit Approach for Optimisation and Modification for a Crude Oil Distillation System | 1363 |
Kamel D., Gadalla M., Ashour F. | >DOI:
10.3303/CET1335227 |
Steam Reforming of Ethanol to H2 over Bimetallic Catalysts: Crucial Roles of Ceo2, Steam-to-carbon Ratio and Space Velocity | 1369 |
Palma V., Castaldo F., Ciambelli P., Iaquaniello G. | >DOI:
10.3303/CET1335228 |
Magnetically Modified Coffee Silverskin for the Removal of Xenobiotics from Wastewater | 1375 |
Zuorro A., Di Battista A., Lavecchia R. | >DOI:
10.3303/CET1335229 |
Energy Conservation and Optimization in Condensate Splitter Plant | 1381 |
Al-Mutairi E.M., Elkawad H. | >DOI:
10.3303/CET1335230 |
Investigation of Temperature Effects in Efficiency Improvement of Non-uniformly Cooled Photovoltaic Cells | 1387 |
Al Tarabsheh A., Voutetakis S., Papadopoulos A.I., Seferlis P., Etier I., Saraereh O. | >DOI:
10.3303/CET1335231 |
Design of Reverse Logistics Network for Waste Batteries with an Application in Turkey | 1393 |
Donmez I., Turkay M. | >DOI:
10.3303/CET1335232 |
Simulating the Wildfire in Rhodes in 2008 with a Cellular Automata Model | 1399 |
Russo L., Vakalis D., Siettos C. | >DOI:
10.3303/CET1335233 |
On the Dynamics of Open and Closed Loop Reverse Flow Catalytic Reactors | 1405 |
Brasiello A., Crescitelli S., Russo L. | >DOI:
10.3303/CET1335234 |
Determination of Oil Products in Waste and Natural Waters Using Tetra?hloromethane | 1411 |
Trokhin V., Bessarabov A., Sevastyanov D., Trynkina L., Stepanova T., Vendilo A. | >DOI:
10.3303/CET1335235 |
Solubility of Carbon Dioxide in Five Promising Ionic Liquids | 1417 |
Nonthanasin T., Henni A, Saiwan C. | >DOI:
10.3303/CET1335236 |
Uncertainty Analysis of Industrial Fire Effects Simulation | 1423 |
Chettouh S., Hamzi R., Innal F., Haddad D. | >DOI:
10.3303/CET1335237 |