CHEMICAL ENGINEERING TRANSACTIONS - VOL.45
Guest Editors: Petar Sabev Varbanov, Jirí Jaromír Klemeš, Sharifah Rafidah Wan Alwi, Jun Yow Yong, Xia Liu
Copyright © 2015, AIDIC Servizi S.r.l.,

ISBN 978-88-95608-36-5; ISSN 2283-9216

Table of Contents & Authors Index
DOI
 
Is the Future Really Renewable? 1
Ponton J.W. DOI: 10.3303/CET1545001
Process integration for sustainable development
 
   
Pinch Analysis of an Industrial Milk Evaporator with Vapour Recompression Technologies 7
Walmsley T.G., Walmsley M.R.W., Neale J.R., Atkins M.J. DOI: 10.3303/CET1545002
   
Water Network Optimisation with Consideration of Network Complexity 13
Ong B.H.Y., Pang Y.S., Wan J.Y., Yap A.K.S. , Ng W.P.Q., Foo D.C.Y. DOI: 10.3303/CET1545003
   
Incorporating District Cooling System in Total Site Heat Integration 19
Liew P.Y., Wan Alwi S.R., Manan Z.A., Klemeš J.J., Varbanov P.S. DOI: 10.3303/CET1545004
   
Thermo-hydraulic Design of Single and Multi-pass Helical Baffle Heat Exchangers 25
Picón-Núñez M., Alvarado-Briones B., Rodríguez-Ibarra J.E. DOI: 10.3303/CET1545005
   
A Procedure for the Retrofitting of Large-scale Heat Exchanger Networks for Fixed and Flexible Designsesentation of the Grid Diagram for Heat Exchanger Networks 31
Cucek L., Kravanja Z. DOI: 10.3303/CET1545006
   
Process Integration Solutions for Water Networks in Integrated Steel Making Plants 37
Alcamisi E., Matino I., Colla V., Maddaloni A., Romaniello L., Rosito F. DOI: 10.3303/CET1545007
   
Flowrate Targeting for Hydrogen Network with Intermediate Header 43
Deng C., Zhou Y., Feng X. DOI: 10.3303/CET1545008
   
Synthesis of Multi-period Heat Exchanger Network Considering Characteristics of Sub-periods 49
Kang L., Liu Y., Hou J. DOI: 10.3303/CET1545009
   
Improved Composite Table Algorithm for Targeting Regeneration-recycle Water Network 55
Parand R., Yao H.M., Foo D.C.Y., Tadé M.O. DOI: 10.3303/CET1545010
   
Optimization of Velocity in Heat Exchanger Networks for Fouling Mitigation 61
Zhan S., Wang Y., Feng X. DOI: 10.3303/CET1545011
   
Efficient Solution Strategy for Stage-wise MINLP Model of Interplant Heat Integration Using Heat Recovery Loop 67
Chang C., Wang Y., Feng X. , Zhang P. DOI: 10.3303/CET1545012
   
Resilient Decision Making in Steam Network Investments 73
Bungener S.L., Eetvelde G.V., Descales B., Maréchal F. DOI: 10.3303/CET1545013
   
Power Generation from Pre-treated Empty Fruit Bunch Using Single Chamber Microbial Fuel Cell 79
Nik Mahmood N.A., Thong L.K., Ibrahim K.A., Chyan J.B., Ghazali N.F. DOI: 10.3303/CET1545014
   
Integration of a Hydrogen Network with the Vacuum Gas Oil Hydrocracking Reaction 85
Mao J., Liu G., Wang Y., Zhang D. DOI: 10.3303/CET1545015
   
Optimization Framework for Energy-induced Separation Network: Application to the Chilling Train System in Ethylene Plants 91
Wang D., Fan X., Feng X. DOI: 10.3303/CET1545016
   
Initial Analysis on Heat Exchanger Networks of Fatty Acid Fractionation Plant to Optimize Energy Recovery and Controllability 97
Abu Bakar S.H., Abdul Hamid M.K., Wan Alwi S.R., Manan Z.A. DOI: 10.3303/CET1545017
   
Matrix Representation of the Grid Diagram for Heat Exchanger Networks 103
Yong J.Y., Varbanov P.S., Klemeš J.J. DOI: 10.3303/CET1545018
   
A Procedure for the Retrofitting of Large-scale Heat Exchanger Networks for Fixed and Flexible Designs Applied to Existing Refinery Total Site 109
Cucek L., Mantelli V., Yong J.Y., Varbanov P.S., Klemeš J.J., Kravanja Z. DOI: 10.3303/CET1545019
   
A Linear Mathematical Model to Determine the Minimum Utility Targets for a Batch Process 115
Chaturvedi N.D., Manan Z.A., Wan Alwi S.R., Bandyopadhyay S. DOI: 10.3303/CET1545020
   
Safety Analysis Embedded in Total Site Synthesis 121
Nemet A., Lee K., Klemeš J.J., Varbanov P.S., Moon I., Kravanja Z. DOI: 10.3303/CET1545021
   
Heat Integration of Material Transfer Streams in Batch Processing Plants 127
Lee J.-Y., Seid E.R., Majozi M. DOI: 10.3303/CET1545022
   
Pinch Analysis Based Approach to Safety Risk Management in the Process Industries 133
Tan R.R., Abdul Aziz M.K., Ng D.K.S., Foo D.C.Y., Lam H.L. DOI: 10.3303/CET1545023
   
Inter-plant Water Integration with Considerations of Water Supply Constraint and Differential Water Price 139
Jia X., Li Z., Wang F., Chen C.-L., Foo D.C.Y. DOI: 10.3303/CET1545024
   
Waste Management Pinch Analysis (wampa) with Economic Assessment 145
Tan S.T., Ho W.S., Hashim H., Lim J.S., Lee C.T. DOI: 10.3303/CET1545025
   
Safety Issues Consideration for Direct and Indirect Heat Transfer on Total Sites 151
Liu X., Klemeš J.J., Varbanov P.S., Qian Y., Yang S. DOI: 10.3303/CET1545026
   
Cost Minimisation for Total Site Heat Recovery 157
Boldyryev S., Krajacic G., Duic N., Varbanov P.S. DOI: 10.3303/CET1545027
Energy saving technology
 
   
Retrofit of a Resilient Hybrid Power System 163
Chen C.-L., Chen H.-C., Lee J.-Y. DOI: 10.3303/CET1545028
   
Integration of Biomass Conversion Technologies and Geothermal Heat Into a Model Wood Processing Cluster 169
Atkins M.J., Walmsley M.R.W., Walmsley T.G., Neale J.R. DOI: 10.3303/CET1545029
   
A Case Study of Area-wide Energy Saving for Heavy Chemical Complex in Japan 175
Matsuda K. DOI: 10.3303/CET1545030
   
Integration of Multiple Effect Evaporators with Solar Thermal Systems 181
Alcamisi E., Bandyopadhyay S. DOI: 10.3303/CET1545031
   
Numerical Investigation of Energy Saving Potential for Self-heat Recuperation 187
Kansha Y., Mizuno H., Kotani Y., Ishizuka M., Fu Q., Tsutsumi A. DOI: 10.3303/CET1545032
   
Combustion Performance of a Counter-rotating Double Swirl Flame Burner Under Stratified Burning Condition 193
Chong C.T., Lam S.S., Hochgreb S. DOI: 10.3303/CET1545033
   
Target-oriented Robust Optimization of Polygeneration Systems 199
Aviso K.B., Sy C.L., Ubando A.T., Tan R.R. DOI: 10.3303/CET1545034
   
Systematic Design and Analysis of Biomass Refineries for Power Generation 205
Simasatitkul L., Arpornwichanop A. DOI: 10.3303/CET1545035
   
Application of Sustainable Integrated Process Design and Control for Four Distillation Column Systems 211
Nordin M.Z., Othman M.R., Hamid M.K.A. DOI: 10.3303/CET1545036
   
Shortcut Model for Predicting Refrigeration Cycle Performance 217
Etoumia A., Jobson M., Emtir M. DOI: 10.3303/CET1545037
   
Maximizing of the Energy Generation by Pressure Retarded Osmosis 223
Nagy E., Dudás J. DOI: 10.3303/CET1545038
   
A Modified Graphical Method to Target the Regeneration Stream Flow Rate for Water-using Networks 229
Zhu J.-F. , Xu D.-L. , Liu Z.-L. DOI: 10.3303/CET1545039
   
Integration Processes of Benzene-toluene-xylene Fractionation, Hydrogenation, Hydrodesulphurization and Hydrothermoprocessing on Installation of Benzene Unit 235
Kapustenko P.O., Ulyev L.M., Ilchenko M.V., Arsenyeva O.P. DOI: 10.3303/CET1545040
   
A Proposal of an Energy Saving Technology Framework for the Hospital 241
Machado C.M.L., Scavarda A., Zhao F., Kipper L.M. DOI: 10.3303/CET1545041
   
Operational Optimization of Reverse Osmosis Plant Using Mpc 247
Manenti F., Nadezhdin I.S., Goryunov A.G., Kozin K.A., Baydali S.A., Papasidero D., Rossi F., Potemin R.V. DOI: 10.3303/CET1545042
CO2 minimisation and mitigation
 
   
Carbon Dioxide Absorption by Ammonia Intensified with Membrane Contactors 253
Molina C.T., Bouallou C. DOI: 10.3303/CET1545043
   
Carbon Dioxide Reduction with Hydrogen in a Continuous Catalytic Monolith Photoreactor 259
Tahir B., Tahir M., Saidina Amin N.A. DOI: 10.3303/CET1545044
   
A New Algebraic Pinch Analysis Tool for Optimising CO2 Capture, Utilisation and Storage 265
Mohd Nawi W.N.R., Wan Alwi S.R., Manan Z.A., Klemeš J.J. DOI: 10.3303/CET1545045
   
Numerical Evaluation of CO2 Capture on Post-combustion Processes 271
Chavez R.-H., Guadarrama J.J. DOI: 10.3303/CET1545046
   
Assessment of CO2 Capture by Calcium Looping from Natural Gas Combined Cycle (ngcc) Power Plants 277
Cormos C., Cormos A. DOI: 10.3303/CET1545047
   
Carbon Footprint Reduction via Voltage Asymmetry Compensation of Three-phase Low Voltage Grid Utilizing Small Domestic Power Plants 283
Neukirchner L., Göllei A., Görbe P., Magyar A. DOI: 10.3303/CET1545048
   
An Enviro-economic Comparison of Two Different CO2 Avoidance Processes for Ngcc-derived Electricity 289
Lambert T., Hoadley A., Hooper B. DOI: 10.3303/CET1545049
   
Optimal Low Carbon Cement Production Cost via Co-processing and Carbon Capture and Storage 295
Ishak S.A., Hashim H., Muis Z.A. DOI: 10.3303/CET1545050
   
CO2 Adsorption Equilibria on a Hybrid Palm Shell-peek Porous Carbons 301
Hamza U.D., Nasri N.S., Saidina Amin N.A., Mohd Zain H. , Mohammed J. DOI: 10.3303/CET1545051
Heat exchangers as equipment and integrated items
 
   
Identification of the Most Effective Heat Exchanger for Waste Heat Recovery 307
Kilkovský B., Jegla Z., Turek V. DOI: 10.3303/CET1545052
   
Fuzzy Model-based Neural Network Predictive Control of a Heat Exchanger 313
Vasickaninová A., Bakošová M. DOI: 10.3303/CET1545053
   
Object-oriented Model and File Format for Heat Exchanger Network Computations 319
Barna B., Varbanov P.S., Klemeš J.J., Yong J.Y. DOI: 10.3303/CET1545054
Integration of renewables, biomass and energy conversion technologies
 
   
Strategic Site Selection of Microalgae Industry in the Philippines Using Analytic Hierarchy Process 325
Ubando A.T., Felix C.B., Promentilla M.A.B., Culaba A.B. DOI: 10.3303/CET1545055
   
Operational Problems: Biomass Boilers with Oversized Output 331
Máša V., Vondra M. DOI: 10.3303/CET1545056
   
An Argument for Developing Waste-to-energy Technologies in Saudi Arabia 337
Nizami A., Rehan M., Ouda O.K.M., Shahzad K., Sadef Y., Iqbal T., Ismail I.M.I. DOI: 10.3303/CET1545057
Integrated and multifunctional operations
 
   
Expansion of a Diesel Plant Into a Hybrid Power System Using Power Pinch Analysis 343
Mohammad Rozali N.E., Wan Alwi S.R., Ho W.S., Manan Z.A., Klemeš J.J. DOI: 10.3303/CET1545058
   
Methodology for “surrogate-assisted" Multi-objective Optimisation (moo) for Computationally Expensive Process Flowsheet Analysis 349
Sharma I., Hoadley A., Mahajani S.M., Ganesh A. DOI: 10.3303/CET1545059
   
Fuzzy Mathematical Programming Approach in the Optimal Design of an Algal Bioenergy Park 355
Ubando A.T., Culaba A.B., Aviso K.B., Tan R.R., Cuello J.L., Ng D.K.S., El-Halwagi M.M. DOI: 10.3303/CET1545060
   
Investigation of the Solar Hybrid Photo-thermochemical Sulfur-ammonia Water Splitting Cycle for Hydrogen Production 361
Kalyva A.E., Vagia E.C. , Konstandopoulos A.G., Srinivasa A.R., T-Raissi A., Muradov N., Kakosimos K.E. DOI: 10.3303/CET1545061
   
Sustainable Multi-objective Planning of Biomass Conversion Systems Under Uncertainty 367
Santibañez-Aguilar J.E., Morales-Rodriguez R., González-Campos J.B., Ponce-Ortega J.M. DOI: 10.3303/CET1545062
   
Optimal Sizing of a Photovoltaic-thermal Hybrid System Using Energy Ratio 373
Thakare M.S., Ghosh P.C., Bandyopadhyay S. DOI: 10.3303/CET1545063
   
Understanding the Technological Substitution by Hybrid Modelling Practice: a Methodological Approach 379
Timma L., Blumberga A., Blumberga D. DOI: 10.3303/CET1545064
   
A Novel Chemical Product Design Framework with the Integration of Safety and Health Aspects 385
Ten J.Y., Hassim M.H., Ng D.K.S., Chemmangattuvalappil N. DOI: 10.3303/CET1545065
Operational research, supply chain and technology management
 
   
Optimising the Water-energy Nexus over Process and Product Networks 391
Garcia D.J., You F. DOI: 10.3303/CET1545066
   
Comparison of Robust Model-based Control Strategies Used for a Heat Exchanger Network 397
Oravec J., Bakošová M., Mészáros A. DOI: 10.3303/CET1545067
   
An Optimization-based Cooperative Game Approach for Allocation of Costs and Benefits in Interplant Process Integration 403
Tan R.R., Ng R.T.L., Andiappan V., Wan Y.K. , Ng D.K.S. DOI: 10.3303/CET1545068
   
Dynamic Simulation of Hydrogen Generation from Renewable Energy Sources 409
Sharifian S., Harasek M. DOI: 10.3303/CET1545069
   
Optimal Design of Energy Supply Systems for Housing Complexes Using Multiple Cogeneration Technologies 415
Fuentes-Cortés L.F., Ponce-Ortega J.M., Nápoles-Rivera F., Serna-González M., El-Halwagi M.M. DOI: 10.3303/CET1545070
   
Lng Port Interconnection with the Natural Gas Distribution Network in Finland 421
Mikolajková M., Saxén H., Pettersson F. DOI: 10.3303/CET1545071
   
Perspectives on Investment Cost Estimates for Gasification-based Biofuel Production Systems 427
Holmgren K.M., Berntsson T.S., Andersson E., Rydberg T. DOI: 10.3303/CET1545072
   
Environmental Assessment of Remediation Technologies for Mercury Containing Wastes Using Lca Approach 433
Busto Y., Palacios E.W., Tack F.M.G., Peralta L.M., Cabrera X., Dominguez E.R., Rios L.M. DOI: 10.3303/CET1545073
   
A Grid-structure Based Multi-region Optimisation Model for the Development of Power Generation Sector in China 439
Guo Z., Liu P., Ma L., Li Z. DOI: 10.3303/CET1545074
   
A New Green Index as an Overall Quantitative Green Performance Indicator of a Facility 445
Mustapha M.A., Manan Z.A., Wan Alwi S.R. DOI: 10.3303/CET1545075
   
Meeting the Fixed Water Demand of MSF Desalination Using Scheduling in gPROMS 451
Sowgath T.M., Mujtaba I. DOI: 10.3303/CET1545076
   
Multi-period Planning of Centralized Sewage Treatment Plant for Electricity Generation in Iskandar Malaysia 457
Tarmizi M.S., Hashim H., Lim J.S., Muis Z.A. DOI: 10.3303/CET1545077
   
Game Theory Approach in Malaysia Palm Biomass Industry Analysis 463
Tang J.P., Lam H.L., Abdul Aziz M.K., Morad N.A. DOI: 10.3303/CET1545078
   
Control and Optimization of Aromatic Compounds in Multivariable Distillation Column 469
Al-Shatri A.H., Ahmad A., Abdullah N. , Oladokun O., Al-shanini A., Khalil M. DOI: 10.3303/CET1545079
   
Novel Approach for Integrated Biomass Supply Chain 475
Hong B.H., Lam H.L. DOI: 10.3303/CET1545080
   
Studying Oven Technology Towards the Energy Consumption Optimisation for the Baking Process 481
Papasidero D., Corbetta M., Pierucci S., Pirola C., Manenti F. DOI: 10.3303/CET1545081
   
Integration of Geological Sequestration and Microalgae Biofixation Supply Chains for Better Greenhouse Gas Emission Abatement 487
Yue D., You F. DOI: 10.3303/CET1545082
   
Sustainable Design and Operation of Shale Gas Supply Chain Networks with Life Cycle Economic and Environmental Optimisation 493
Gao J., You F. DOI: 10.3303/CET1545083
   
A Simulation-based Optimization Method for Solving the Integrated Supply Chain Network Design and Inventory Control Problem Under Uncertainty 499
Ye W., You F. DOI: 10.3303/CET1545084
   
Towards Implementing a Total Capital Cost Budgeting Constraint in Milp-based Approximations to Mifp Problems 505
Garcia D.J., You F. DOI: 10.3303/CET1545085
   
Analysis of a Looped Steam Pipe Network 511
Wang S.-H., Wang W.-J., Chen C.-L. DOI: 10.3303/CET1545086
   
Electric System Cascade Analysis (esca): Cost and Efficiency Trade-off and Optimization 517
Ho W.S., Hashim H., Mohammad Rozali N.E., Muis Z.A., Lim J.S. DOI: 10.3303/CET1545087
   
Comprehensive Sensitivity Analysis in NLP Models in Pse Applications Using Space-filling Doe Strategy 523
Tan R.R., Aviso K.B., Uy O.M. DOI: 10.3303/CET1545088
   
A Management Model for Decision Making at the Hospital Supply Chain to Minimize Waste 529
Scavarda A., Machado C.M.L., Vaccaro G.L.R., Korzenowski A.L. DOI: 10.3303/CET1545089
   
Evaluating the Economic Efficiency of the Technologies for Greenhouse Gas Footprint Reduction 535
Pintaric Z.N., Varbanov P.S., Klemeš J.J., Kravanja Z. DOI: 10.3303/CET1545090
   
Retrofitting of Water-using Networks with Multiple Contaminants by Adding Regeneration Unit 541
Fan X.-Y., Liu Z.-Y. DOI: 10.3303/CET1545091
   
Petri Net Methodology for Optimisation of Heat Integration and Batch Process Scheduling 547
Jia Y., Xiao W., Ruan X., He G., Jia X. DOI: 10.3303/CET1545092
Clean technologies – Low emissions technologies
 
   
Fractionation of Spent Sulphite Liquor Into Monomeric Sugars and Lignosulphonates by an Ultrafiltration Series System 553
Fernández-Rodríguez J., García A., Coz A., Labidi J. DOI: 10.3303/CET1545093
   
Flexible Photovoltaics/fuel Cell/wind Turbine (pvfcwt) Hybrid Power System Designs 559
Lin M.-H., Adi V.S.K., Chang C.-T. DOI: 10.3303/CET1545094
   
Effects of Pretreatment on Microalgae Drying 565
Yeoh K.P., Cheung T.C.K., Pahija E., Hui C.W. DOI: 10.3303/CET1545095
   
Export-import of Virtual Carbon Emissions and Water Flows Embodied in International Trade 571
Liu X., Klemeš J.J., Cucek L., Varbanov P.S., Yang S., Qian Y. DOI: 10.3303/CET1545096
   
Cost-benefit and Greenhouse-gases Mitigation of Food Waste Composting: a Case Study in Malaysia 577
Kamyab H., Goh R.K.Y., Wong J.H., Lim J.S., Khademi T., Ho W.S., Ahmad R., Hashim H., Ho C.S. , Lee C.T. DOI: 10.3303/CET1545097
   
Soybean Biorefinery: Process Simulation and Analysis 583
Granjo J., Duarte B., Oliveira N. DOI: 10.3303/CET1545098
   
Comparative Study of Electrolyte Thermodynamic Models for Carbon Dioxide Solubility in Water at High Pressure 589
Suleman H., Nasir Q., Maulud A.S., Man Z. DOI: 10.3303/CET1545099
   
Helium Extraction from Lng End-flash 595
Kim D., Gundersen T. DOI: 10.3303/CET1545100
   
Synthetic Natural Gas (sng) Production via Gasification Process with Blend of Coal and Wood Chip as Feedstock 601
Chen P.-C., Chiu H.-M., Chyou Y.-P. DOI: 10.3303/CET1545101
   
Optimisation Process of Sulphur Recovery Using a Two-step Biological System 607
Alesia F.D., Chirwa E.M.N. DOI: 10.3303/CET1545102
   
Clean Hydrogen Production from Low Rank Coal: Novel Integration of Drying, Gasification, Chemical Looping, and Hydrogenation 613
Aziz M., Oda T., Kashiwagi T. DOI: 10.3303/CET1545103
   
Applying Exergy Analysis for Simulation and Optimization of the Iso-butane Recovery Process from Liquefied Petroleum Gas 619
Le S.N.T., Nguyen K.V., Mahadzir S.B., Chen C.-L. DOI: 10.3303/CET1545104
   
Using of Natural Kazakhstan’s Sorbents for Catalytic Purification of Gas Emissions 625
Sadenova M.A., Abdulina S.A., Tungatarova S.A. DOI: 10.3303/CET1545105
   
Comparative Life Cycle Analysis of Different Lighting Devices 631
Shahzad K., Rehan M., Ismail I.M.I., Sagir M., Tahir M.S., Bertok B., Nizami A. DOI: 10.3303/CET1545106
Sustainable processing and production
 
   
A New Approach Towards Carbon-constrained Energy Sector Planning: a Case Study for Lakshadweep Islands, India 637
Bandyopadhyay S., Desai N.B., Kashyap A. DOI: 10.3303/CET1545107
   
Appropriate Placement of Compressors and Expanders in Above Ambient Processes 643
Fu C. , Gundersen T. DOI: 10.3303/CET1545108
   
Mitigation of Climate Change by Reducing Carbon Dioxide Emissions in Cement Industry 649
Mikulcic H., Wang X., Vujanovic M., Tan H., Duic N. DOI: 10.3303/CET1545109
   
High Solids Loading in Ethanol Production – Effects on Heat Integration Opportunities and Economics 655
Svensson E., Lundberg V., Harvey S. DOI: 10.3303/CET1545110
   
Closing the Loop – Processing of Waste By-product from Aluminum Recycling Into Useful Product for the Steel Industry 661
Bellqvis D., Ångström S., Magnusson M., Nordhag L., Falk O., Gustavsson L. DOI: 10.3303/CET1545111
   
Co-pyrolysis of Peat and Petroleum Containing Waste on Ni and CO Containing Catalysts 667
Kosivtsov Y.Y., Chalov K.V., Lugovoy Y.V., Sulman E.M., Stepacheva A.A. DOI: 10.3303/CET1545112
   
Sustainable Power Plant Planning Using Pinch Analysis Approach 673
Lee M.Y., Ho W.S., Hashim H., Lim J.S. DOI: 10.3303/CET1545113
   
Enhanced Sulphur Removal from Tyre-derived Oil Using Aluminosilicate Mcm-48 with Pyrolysis of Waste Tyres 679
Trongyong S., Jitkarnka S. DOI: 10.3303/CET1545114
   
Co3o4/?-al2o3 as a Catalyst for Green Chemicals Production via Catalytic Dehydration of Bio-ethanol 685
Chokcharoenchai B., Jitkarnka S. DOI: 10.3303/CET1545115
   
A Systematic Literature Review of Design-manufacturing Integration for Sustainable Products 691
Thomé A.M.T., Scavarda A. DOI: 10.3303/CET1545116
   
A Model for the Design of Optimal Total Water Network (otwn) 697
Sujak S., Lim J.S., Wan Alwi S.R., Manan Z.A. DOI: 10.3303/CET1545117
   
Optimization of a Membrane Reactor for Low Temperature Methane Steam Reforming 703
Kyriakides A., Voutetakis S., Papadopoulou S., Seferlis P. DOI: 10.3303/CET1545118
   
Operational Optimization of Reverse Osmosis Plant Using Mpc 709
Manenti F., Nadezhdin I.S., Goryunov A.G., Kozin K.A., Baydali S.A., Papasidero D., Rossi F., Potemin R.V. DOI: 10.3303/CET1545119
   
Analysis of the Perception of the Social Level and Its Relationship with Environmental Awareness of the Consumer Behavior 715
Santos M.B., Klimeck K.A., Schimith C.D., Scavarda A., Bittencourt S., Vaccaro G.L.R., Gomes C.M., Scherer F.L., Weise A.D. DOI: 10.3303/CET1545120
   
Conversion of Bio-ethanol Into Olefins and Synthesis-gas 721
Tungatarova S.A., Shaizada E., Nauryzbaeva A.Z., Baizhumanova T.S., Zheksenbaeva Z.T., Chanysheva I.S. DOI: 10.3303/CET1545121
   
Sustainability at the Healthcare Organizations: an Analysis of the Impact on the Environment, Society, and Economy 727
Machado C.M.L., Scavarda A., Kipper L.M., Santa R., Ferrer M.A. DOI: 10.3303/CET1545122
Waste minimisation, processing and management
 
   
Multi-commodity Network Flow Model Applied to Waste Processing Cost Analysis for Producers 733
Šomplák R., Touš M., Pavlas M., Gregor J., Popela P., Rychtár A. DOI: 10.3303/CET1545123
   
New Methods for Waste Minimization in an Integrated Steel Site 739
Lundkvist K., Brämming M., Riesbeck J., Wedholm A. DOI: 10.3303/CET1545124
   
A Perspective Study on the Urban River Pollution in Malaysia 745
Chin C.M.M., Ng Y.J. DOI: 10.3303/CET1545125
   
Behaviour of Mercury from Hazardous Solid Waste Generated by Chlor-alkali Cuban Industry. Remediation Proposal at Pilot Scale 751
Busto Y., Palacios E.W., Tack F.M.G., Peralta L.M., Cabrera X., Rios L.M. DOI: 10.3303/CET1545126
   
An Analysis of Waste Management in Hospitals 757
Scavarda A., Thomé A.M.T., Caldas M.F. DOI: 10.3303/CET1545127
   
Computational System for Simulation and Forecasting in Waste Management Incomplete Data Problems 763
Zavíralová L., Šomplák R., Pavlas M., Kropác J., Popela P., Putna O., Gregor J. DOI: 10.3303/CET1545128
   
Waste Management Practices Adopted by Brazilian Companies Members of the Corporate Sustainability Index of the Stock Exchange 769
Bittencourt S., Sellitto M.A., Gabbi A., Schimith C.D., Ferreira A.R., Basso R.L., Scavarda A. DOI: 10.3303/CET1545129
Thermal treatment of waste including waste to energy
 
   
Upgrading of Waste Tyre-derived Oil from Waste Tyre Pyrolysis over Ni Catalyst Supported on Hzsm-5 Zeolite 775
Namchot W., Jitkarnka S. DOI: 10.3303/CET1545130
   
Influence of the Waste Biomass Gasification Gas Composition on the Laminar Flame Speed Values 781
Werle S. DOI: 10.3303/CET1545131
   
Integration of Biomass Gasification-based Olefins Production in a Steam Cracker Plant—global Ghg Emission Balances 787
Arvidsson M., Johansson E., Morandin M., Harvey S. DOI: 10.3303/CET1545132
   
CFD Simulations of Natural Convection Heat Transfer in Enclosures with Varying Aspect Ratios 793
Pendyala R., Wong Y.S., Ilyas S.U. DOI: 10.3303/CET1545133
Dynamic, flexible and sustainable plant operation
 
   
Experimental Investigation to Evaluate the Evaporation And condensation Heat Transfer Coefficients on the Outside of Vipertex Enhanced Performance 1eht Tubes 799
Kukulka D.J., Smith R., Li W. DOI: 10.3303/CET1545134
   
Systematic Selection of Mixtures as Post-combustion CO2 Capture Solvent Candidates 805
Zarogiannis T., Papadopoulos A.I., Seferlis P. DOI: 10.3303/CET1545135
   
Selection of Working Fluid for an Organic Rankine Cycle Based Concentrating Solar Thermal Power Plant 811
Desai N.B., Bandyopadhyay S. DOI: 10.3303/CET1545136
   
Evaluation of the Unsteady Turbulence Modelling and Thermal Insulation on the Performance of Partial Combustion Lance 817
Law W.P., Gimbun J. DOI: 10.3303/CET1545137
   
Multi-objective Pinch Analysis with Multiple Resources 823
Krishna Priya G.S., Bandyopadhyay S., Tan R.R. DOI: 10.3303/CET1545138
   
Fuzzy Analytical Hierarchy Process (AHP) for Multi-criteria Selection in Drying and Harvesting Process of Microalgae System 829
Tan J., Low K.Y., Nik Sulaiman N.M., Tan R.R., Promentilla M.A.B. DOI: 10.3303/CET1545139
   
Optimization on Scheduling for Cleaning Heat Exchangers in the Heat Exchanger Networks 835
Licindo D., Handogo R., Sutikno J.P. DOI: 10.3303/CET1545140
   
Feasibility of Using Shape Memory Alloy (sma) Spring to Facilitate Actuation of an Iris Coupled to a Solar Reactor 841
Rajan A., Abouseada M., Manghaipathy P., Srinivasa A.R., Ozalp N. DOI: 10.3303/CET1545141
   
An Overview on Life Cycle Inventory Leads to Green Manufacturing: Methods and Modifications 847
Islam S., Ponnambalam S.G., Lam H.L. DOI: 10.3303/CET1545142
   
Dynamic Optimization of Ch4/co2 Separating Operation Using Pressure Swing Adsorption Process with Feed Composition Varies 853
Kim S., Ko D., Moon I. DOI: 10.3303/CET1545143
   
Robust Optimisation for Integrated Planning, Scheduling and Dynamic Optimisation of Continuous Processes Under Uncertainty 859
Shi H., You F. DOI: 10.3303/CET1545144
   
The System Dynamics Use for Measurement of the Results of Technological Applications for Genetic Improvement in Milk Supply Chain 865
Schimith C.D., Scavarda A., Bittencourt S., Santos M.B., Vaccaro G.L.R., Gabbi A., Weise A.D. DOI: 10.3303/CET1545145
   
Achieving Sustainability in Non-ets Sectors Using System Dynamics Modelling Practice 871
Blumberga A., Timma L., Lauka D., Dace E., Barisa A., Blumberga D. DOI: 10.3303/CET1545146
Industrial & experimental studies
 
   
Experimental Study on Characteristics of Flame Front in the Iron Ore Sintering Process 877
Cheng Z., Yang J., Zhou L., Li W., Liu Y., Wang Q. DOI: 10.3303/CET1545147
   
Experimental Investigation and Engineering Application of the Novel Wx/u Desulfurization Equipment 883
Duan Z., Huang W., Jia W., Zhang J. DOI: 10.3303/CET1545148
   
Modeling of Flow Behavior at Downer and Riser in Triple Bed Circulating Fluidized Bed Using Equivalent Circuit 889
Ishizuka M., Mizuno H., Kotani Y., Kansha Y., Tsutsumi A. DOI: 10.3303/CET1545149
   
Estimation of Average Kinetic and Maximum Diameters of Hydrocarbon Groups in Tyre-derived Oil for Catalyst Design Purpose 895
Seng-eiad S., Jitkarnka S. DOI: 10.3303/CET1545150
   
Lignin Concentration by Nanofiltration and Precipitation in a Lignocellulose Biorefinery 901
Weinwurm F., Drljo A., Friedl A. DOI: 10.3303/CET1545151
   
Synthesis of Ethyl Levulinate from Levulinic Acid over Solid Super Acid Catalyst 907
Sivasubramaniam D., Saidina Amin N.A. DOI: 10.3303/CET1545152
   
A Conceptual Approach on Downwind Optimization of Processes for Air Pollution Control 913
Kakosimos K.E. DOI: 10.3303/CET1545153
   
Modelling Multicomponent Devolatilization Kinetics of Imperata Cylindrica 919
Oladokun O., Ahmad A., Tuan Abdullah T.A., Nyakuma B.B., Al-Shatri A.H., Bello A.A. DOI: 10.3303/CET1545154
   
Process Optimization of Dwc for Fatty Acid Fractionation Using Taguchi Methods of Experimental Design 925
Othman M.R., Amran U.I., Rangaiah G.P. DOI: 10.3303/CET1545155
   
Parametric Study of Esterification of Free Fatty Acids Derived from Ceiba Pentandra Seed Oil Using Microwave-assisted Technique via Response Surface Methodology 931
Lieu T., Yusup S., Moniruzzaman M. DOI: 10.3303/CET1545156
   
Cellulose Nanofibers from Recycled Cellulose Pulp 937
Portela I., Alriols M.G., Labidi J., Llano-Ponte R. DOI: 10.3303/CET1545157
   
Effect of Operating Condition on Electrical Resistance and Voltage Efficiency of an Electrochemical Cell in a Vanadium Redox Flow Battery 943
Ngamsai K., Arpornwichanop A. DOI: 10.3303/CET1545158
   
Fouling of Polymeric Hollow Fiber Heat Exchanger by Wastewater 949
Astrouski I., Raudensky M., Dohnal M. DOI: 10.3303/CET1545159
   
Mixed Convection Flow over a Permeable Stretching Wedge in the Presence of Heat Generation/absorption, Viscous Dissipation, Radiation and Ohmic Heating 955
Marneni N., Ashraf M. DOI: 10.3303/CET1545160
   
Use of Pristine Papaya Peel to Remove Pb(ii) from Aqueous Solution 961
Abbaszadeh S., Wan Alwi S.R., Ghasemi N., Nodeh H.R., Webb C., Muhamad I.I. DOI: 10.3303/CET1545161
   
Docosahexaenoic Acid Production from Crude Glycerol by Schizochytrium Limacinum Sr21 967
Lung Y.-T., Tan C.H., Show P.L., Lam H.L., Lan J.C.W. DOI: 10.3303/CET1545162
   
Kinetics of Cr(vi) Reduction and Remobilisation in an Aquifer Permeable Reactive Barrier: Microcosm Simulation 973
Kaimbi L.A., Chirwa E.M.N. DOI: 10.3303/CET1545163
   
The Release of Energy from the Pressure Accumulator in the Pneumatic Pulsator 979
Wolosz K.J. , Wernik J. DOI: 10.3303/CET1545164
   
Study of Heat Transfer in Fins of Pneumatic Pulsator Using Thermal Imaging 985
Wernik J., Wolosz K.J. DOI: 10.3303/CET1545165
   
Heat Transfer Enhancement in Heat Recovery Loops Using Nanofluids as the Intermediate Fluid 991
Tarighaleslami A.H., Walmsley T.G., Walmsley M.R.W., Atkins M.J., Neale J.R. DOI: 10.3303/CET1545166
   
Experimental Study on NOX Formation in Gas-staged Burner 997
Skryja P., Belohradský P., Hudák I., Jurena T. DOI: 10.3303/CET1545167
   
Simulation of Cox Methanation Reactor for the Production of Natural Gas 1003
Sharifian S., Harasek M. DOI: 10.3303/CET1545168
   
Impact of Catalytic Oxidation Operating Conditions on Voc and CO Conversions on the Pt-pd/al2o3 Catalyst 1009
Brummer V., Jecha D., Martinec J., Lestinsky P., Skryja P., Stehlík P. DOI: 10.3303/CET1545169
   
Modelled Behaviour of a High Temperature Electrolyser System Coupled with a Solar Farm 1015
Petipas F., Brisse A., Bouallou C. DOI: 10.3303/CET1545170
   
Numerical Analysis of the Combustible Properties of Sewage Sludge Gasification Gas 1021
Werle S. DOI: 10.3303/CET1545171
   
Unsteadiness and Spatio-temporal Statistics in Intermediate Effervescent Spray Region 1027
Dohnal M., Hájek J., Vondál J. DOI: 10.3303/CET1545172
   
A Computational Investigation of Hydrogen Production from Methane Steam Reactor 1033
Panagakos G., Kyriakides A., Papadopoulou S., Voutetakis S. DOI: 10.3303/CET1545173
   
Combustion Characteristics, Performance and Emissions of a Diesel Engine Fuelled with Water/diesel Emulsions 1039
Guzmán M.A., Katherine Ardila L., Agudelo J.R. DOI: 10.3303/CET1545174
   
Performance Analysis of the Solid Oxide Fuel Cell and Oxyfuel Combustion Integrated System with Different Recycling Methods 1045
Simasatitkul L., Mahisanan C., Arpornwichanop A. DOI: 10.3303/CET1545175
   
Numerical Study of Stirred Tank with Multiphase System 1051
Vondál J., Hájek J., Dohnal M. DOI: 10.3303/CET1545176
   
A Model for Heart Transplantation Sustainability 1057
Baumworcel L., Scavarda A., Thomé A.M.T. DOI: 10.3303/CET1545177
   
Synthesis of Oxygenates by Oxidation of Light Alkanes on Modified Catalysts 1063
Baizhumanova T.S., Tungatarova S.A., Zheksenbaeva Z.T., Kassymkan K., Zhumabek M. DOI: 10.3303/CET1545178
   
Kinetics of Ultrahigh Temperature Water-gas Shift Reaction Catalysts Using Simulated Coal-derived Syngas 1069
Lin J.-Y., Fang C.-M., Chein R.-Y. DOI: 10.3303/CET1545179
   
Aqueous Two-phase Flotation for Extraction of Andrographolide from Andrographis Paniculata 1075
Choy W.Y., Chung C.Y., Lim P.Z., Sagindharan V., Lee S.Y., Show P.L., Lam H.L. DOI: 10.3303/CET1545180
Industrial application & optimal design
 
   
A Numerical Study on the Improving Techniques of the Cooling Performance of a Natural Draft Dry Cooling Tower Under Crosswind 1081
Wang W., Liu P., Li Z., Ni W., Liu J., Li Y. DOI: 10.3303/CET1545181
   
Pinch Analysis Techniques for Carbon Emissions Reduction in the New Zealand Industrial Process Heat Sector 1087
Walmsley M.R.W., Walmsley T.G., Matthews L., Atkins M.J., Neale J.R., Kamp P. DOI: 10.3303/CET1545182
   
Multi-objective Optimization on Driving Options for Rotating Equipment in Process Industries to Make Trade-offs Between Economy and Environmental Impacts 1093
Wu L., Liu Y. , Kang L. DOI: 10.3303/CET1545183
   
Mean Velocity Distributions Under Flow in the Mainstream of a T Pipe Junction 1099
Yin Y., Lin M., Xu X., Qiao X., Wang L., Zeng M., Wang Q. DOI: 10.3303/CET1545184
   
Design Space Approach for Storage Sizing of Hydrogen Fuel Cell Systems Through Pinch Analysis 1105
Ghosh P.C., Bandyopadhyay S., Krishnapriya G.S., Sharan P. DOI: 10.3303/CET1545185
   
Modelling and Optimisation of Dual Fluidisation Bed Gasifiers for Production of Chemicals 1111
Arora P., Hoadley A., Mahajani S.M., Ganesh A. DOI: 10.3303/CET1545186
   
Optimisation of a Batch Extractive Distillation Process with Off-cut Recycle 1117
Hegely L., Lang P. DOI: 10.3303/CET1545187
   
Inherent Safety Assessment Technique for Separation Equipment in Preliminary Engineering Stage 1123
Ahmad S.I., Hashim H., Hassim M.H., Muis Z.A. DOI: 10.3303/CET1545188
   
Characterisation of the Effects of Surface Modifications to Flow Across Rotating Cylinders Using Ansys CFD Modelling 1129
Lopez N.S.A., Mara B.K.G., Mercado B.C.C., Mercado L.A.B., Pascual J.M.G. DOI: 10.3303/CET1545189
   
Optimal Solvent Design for CO2 Capture Process 1135
Ahmad M.Z., Hashim H., Yunus N.A., Muis Z.A. DOI: 10.3303/CET1545190
   
A Fuzzy Analytic Hierarchy Process (fahp) Approach for Optimal Selection of Low-carbon Energy Technologies 1141
Promentilla M.A.B., Aviso K.B., Tan R.R. DOI: 10.3303/CET1545191
   
Optimizing Geopolymer-based Material for Industrial Application with Analytic Hierarchy Process and Multi-response Surface Analysis 1147
Sumabat A.K.R., Mañalac A.J., Nguyen N.T., Kalaw M.E., Tan R.R., Promentilla M.A.B. DOI: 10.3303/CET1545192
   
Flash Point Prediction of Tailor-made Green Diesel Blends Using Unifac-based Models 1153
Phoon L.Y., Mustaffa A.A., Hashim H., Mat R. DOI: 10.3303/CET1545193
   
Improving Energy Efficiency for Refinery Through Bottleneck Elimination 1159
Li S., Zhang H., Meng S., Lu H. DOI: 10.3303/CET1545194
   
Application of the Wallis Plot for the Determination of the Loading Limits of Structured Packings and Sandwich Packings 1165
Yildirim O., Flechsig S., Brinkmann U., Kenig E.Y. DOI: 10.3303/CET1545195
   
Parameters Optimisation of Isopropanol Purification by Hybrid Distillation-vapour Permeation Process Using Response Surface Methodology 1171
Xiao W., Zhou Y., Ruan X., He G., Jia X. DOI: 10.3303/CET1545196
   
Efficient  2D Model of Flow Distribution in Dense Tube Bundles  1177
Turek V., Fialová D., Jegla Z., Kilkovský B. DOI: 10.3303/CET1545197
   
Optimal Processing of Carbon Nanotubes 1183
Hernández-Vargas J., Martinez-Gomez J. , González-Campos J.B., Lara-Romero J., Ponce-Ortega J.M. DOI: 10.3303/CET1545198
   
Validation of Developed Modified Plug-flow Furnace Model for Identification of Burner Thermal Behaviour 1189
Jegla Z., Horsák J., Turek V., Kilkovský B., Tichý J. DOI: 10.3303/CET1545199
   
Design of Diphenyl Carbonate Process via Reactive Distillation Configuration 1195
Chen D.-Y., Weng K.-C., Wang S.-J., Lee H.-Y. DOI: 10.3303/CET1545200
   
The Retrofit Design for Water Network with Multiple Contaminants of Industrial Process 1201
Pungthong K. , Siemanond K. DOI: 10.3303/CET1545201
   
Sustainable Energy Efficient Distillation Columns Sequence Design of Hydrocarbon Mixtures Separation Unit 1207
Zaine M.Z., Mustafa M.F., Ibrahim K.A., Ibrahim N., Hamid M.K.A. DOI: 10.3303/CET1545202
   
Development of Technology for Catalytic Neutralization of Toxic Impurities of Waste Gas from Industrial Enterprises 1213
Zheksenbaeva Z.T., Tungatarova S.A., Baizhumanova T.S., Shaizada E. DOI: 10.3303/CET1545203
   
Systematic Multi-period Carbon Integration in an Industrial City 1219
Al-Mohannadi D.M., Bishnu S.K., Linke P., Alnouri S.Y. DOI: 10.3303/CET1545204
   
Value Addition Through Development and Technology Transfer: a Study in the Electro-electronic Industry 1225
Schimith C.D., Scavarda A., Vaccaro G.L.R., Bittencourt S., Weise A.D., Paludo I., Schimith E.D. DOI: 10.3303/CET1545205
   
Shell-and-plate Heat Exchangers for Efficient Heat Recovery Under the Industrial Application 1231
Arsenyeva O.P., Tovazhnyanskyy L.L., Kapustenko P.O., Khavin G.L., Yuzbashyan A. DOI: 10.3303/CET1545206
   
The Improvements of Performance Reliability in Solar Combisystem by the Applications of Artificial Intelligence 1237
Timma L., Blumberga D. DOI: 10.3303/CET1545207
   
Estimation of Reaction Parameters for Phenol Biodegradation Using Trainable Artificial Neural Networks 1243
Jacobs I.D., Chirwa E.M.N. DOI: 10.3303/CET1545208
   
Thermoseparating Aqueous Two-phase System: Recent Trends and Applications 1249
Leong Y.K., Show P.L., Lan J.C.W., Loh H.S. DOI: 10.3303/CET1545209
CFD and numerical heat transfer
 
   
CFD Study of Biomass Cooking Stove Using autodesk Simulation CFD to Improve Energy efficiency and Emission Characteristics 1255
Sowgath M.T., Rahman M.M., Nomany S.A., Sakib M.N., Junayed M. DOI: 10.3303/CET1545210
   
CFD Analysis of Heat Transfer Performance in a Car Radiator with Nanofluids as Coolants 1261
Pendyala R., Chong J.L., Ilyas S.U. DOI: 10.3303/CET1545211
Sustainable biofuel production
 
   
Transesterification via Direct-ultrasonic Irradiation of Rubber Seed Oil with Waste Materials Based Heterogeneous Catalyst 1267
Amin M.M., Yusup S. DOI: 10.3303/CET1545212
   
Enhancing Bio-kerosene and Bio-gas Oil Production from Bio-ethanol Dehydration Using the Hierarchical Mesoporous Msu-szsm-5 1273
Choopun W., Jitkarnka S. DOI: 10.3303/CET1545213
   
Optimization of Waste Cooking Oil Transesterification in a Continuous Microwave Assisted Reactor 1279
Mohd Ali M.A., Cheng C.K., Yunus R.M., Gimbun J. DOI: 10.3303/CET1545214
   
Element Characteristic Tolerance for Semi-batch Fixed Bed Biomass Pyrolysis 1285
Lim C.H., Mohammed I.Y., Abakr Y.A., Kazi F.K., Yusup S., Lam H.L. DOI: 10.3303/CET1545215
   
Synthesis of Stable Lithium Modified Mesoporous Catalyst for Oligomerization of Biodisel-drive Glycerol to Diglycerol 1291
Ayoub M., Inayat A., Rashid U., Ullah S., Lal B. DOI: 10.3303/CET1545216
   
Control of Bioethanol Fermentation Process: Narx-based Mpc (narx-mpc) Versus Linear-based Mpc (lmpc) 1297
Mohd N., Aziz N. DOI: 10.3303/CET1545217
   
Microwave Irradiated Palm Shell-polyetheretherketone Porous Carbons as CO2 Sorbents: Optimization Using Response Surface Methodology (rsm) 1303
Hamza U.D., Nasri N.S., Saidina Amin N.A., Zain H.M., Mohammed J. DOI: 10.3303/CET1545218
   
Producing Methane Enriched Biogas Using Solvent Absorption Method 1309
Tahir M.S., Shahzad K., Shahid Z., Sagir M., Rehan M., Nizami A. DOI: 10.3303/CET1545219
Sustainable Green Palm Oil Transformation
 
   
Waste Recovery and Regeneration (regen) System for Palm Oil Industry 1315
Ng D.K.S., Ng W.P.Q., Chong M.F., Lim D.L.K. DOI: 10.3303/CET1545220
   
Superstructure-based Synthesis and Optimization of Oil Palm Eco-industrial Town: Case Study in Iskandar Malaysia 1321
Mohamad Shukery M.F., Hashim H., Lim J.S. DOI: 10.3303/CET1545221
   
Non-isothermal Kinetic Analysis of Oil Palm Empty Fruit Bunch Pellets by Thermogravimetric Analysis 1327
Nyakuma B.B., Ahmad A., Johari A., Tuan Abdullah T.A., Oladokun O., Aminu D.Y. DOI: 10.3303/CET1545222
Session Dedicated to Dr Fan Life Achievements
 
   
Spreading the Message: P-graph Enhancements: Implementations and Applications 1333
Klemeš J.J., Varbanov P.S. DOI: 10.3303/CET1545223
   
P-graph Approach to Allocation of Inoperability in Urban Infrastructure Systems 1339
Tan R.R., Aviso K.B., Yu K.D.S., Promentilla M.A.B., Santos J.R. DOI: 10.3303/CET1545224
   
P-graph for Optimising Industrial Symbiotic Networks 1345
Aviso K.B., Chiu A.S.F., Yu K.D.S., Promentilla M.A.B., Razon L.F., Ubando A.T., Sy C.L., Tan R.R. DOI: 10.3303/CET1545225
   
Designing Sustainable Supply Chains in the Energy-water-food Nexus by the P-graph Methodology 1351
Heckl I., Cabezas H., Friedler F. DOI: 10.3303/CET1545226
   
P-graph Methodology for Bi-objective Optimisation of Bioenergy Supply Chains: Economic and Safety Perspectives 1357
Ng R.T.L., Tan R.R., Hassim M.H. DOI: 10.3303/CET1545227
   
Synthesis of Multiple Biomass Corridor via Decomposition Approach: a P-graph Application 1363
How B.S., Hong B.H., Lam H.L., Friedler F. DOI: 10.3303/CET1545228
   
Process Network Synthesis for Benzaldehyde Production: P-graph Approach 1369
Losada J.P., Heckl I., Bertok B., Friedler F., Garcia-Ojeda J.C., Argoti A. DOI: 10.3303/CET1545229
   
Case Study: Optimisation of Federal Land Development Authority Jengka Supply Chain Management Using P-graph Approach 1375
Haleem A.A., Hashim H., Varbanov P.S., Yong J.Y., Klemeš J.J., Yusup S. DOI: 10.3303/CET1545230
POCER
 
   
Effect of Toner Coverage Percentage and Speed of Laser Printer on Total Volatile Organic Compound (tvoc) 1381
Damanhuri A.A.M., Leman A.M., Abdullah A.H., Hariri A. DOI: 10.3303/CET1545231
   
Adsorptive Removal of Salicylic Acid from Aqueous Solutions Using New Graphene-based Nanosorbents 1387
Lee X.J., Chemmangattuvalappil N., Lee L.Y. DOI: 10.3303/CET1545232
   
Algae Cultivation in Wastewater for Biodiesel – a Review 1393
Tan C.H., Chech W.Y., Tau C.L., Show P.L., Juan J.C., Chang J.-S. DOI: 10.3303/CET1545233
   
Review on Sustainability Assessment of Integrated Biorefineries Based on Environmental, Health and Safety Perspectives 1399
Phneah S.L., Hassim M.H., Ng D.K.S., Goh W.S. DOI: 10.3303/CET1545234
   
A Complete Mathematical Model of Convective Drying in Membrane Fabrication 1405
Harun Z., Ong T.C. DOI: 10.3303/CET1545235
   
Rheology Study of Water-in-crude Oil Emulsions 1411
Wong S.F., Law M.C., Samyadia Y., Dol S.S. DOI: 10.3303/CET1545236
   
Development and Performance Prediction of Polyethersulfone-carbon Molecular Sieve Mixed Matrix Membrane for CO2/CH4 Separation 1417
Nasir R., Mukhtar H., Man Z., Shaharun M.S., Abu Bakar M.Z. DOI: 10.3303/CET1545237
   
Ionic Liquid Embedded in Polymeric Membrane for High Pressure CO2 Separation 1423
Mohshim D.F., Mukhtar H., Man Z. DOI: 10.3303/CET1545238
   
Effect of Ph on Flux and Rejection for Diglycolamine and Triethanolamine 1429
Zainal Abidin M.U.S., Mukhtar H., Shaharun M.S. DOI: 10.3303/CET1545239
   
Effect of Annealing on Virgin and Recycled Carbon Fibre Electrochemically-deposited with N-type Bismuth Telluride 1435
Jagadish P.R., Lau P.L., Chan A., Siddiqui M.K. DOI: 10.3303/CET1545240
   
Fluidised Bed Gasification of Oil Palm Frond (opf) and Napier Grass (ng): a Preliminary Study 1441
Mustafa N., Li C.S., Doevendans T., Chin S.A., Karim Ghani A.W.A. DOI: 10.3303/CET1545241
   
A Review on Nanoparticle Addition in Base Fluid for Improvement of Biodegradable Ester-based Drilling Fluid Properties 1447
Chai Y.H., Yusup S., Chok V.S. DOI: 10.3303/CET1545242
   
Characterization of Total Particulate Emission for Palm Oil Mill Boiler 1453
Hanafi N.H., Hassim M.H., Mokhtar M.M., Yusuf M.R.M. DOI: 10.3303/CET1545243
   
Analysis on the Relationship Between Eco-connectance and Economic Performance of an Eco-industrial Park 1459
Lee S.H., Andiappan V., Chew I.M.L., Ng D.K.S. DOI: 10.3303/CET1545244
   
The Effect of Polymer Composition on CO2/CH4 Separation of Supported Carbon Membrane 1465
Ismail N.H., Salleh W.N.W., Sazali N., Ismail A.F. DOI: 10.3303/CET1545245
   
The Efficacy of Calcium Carbonate Scale Inhibition by Commercial Polymer Scale Inhibitors 1471
Chew C.B., Mat R. DOI: 10.3303/CET1545246
   
Natural, Biodegradable and Non-toxic Coagulant from G. Hylocereus Foliage: Optimisation on Coagulant Preparation 1477
Jun L.E.F., Ahmad A.L. DOI: 10.3303/CET1545247
   
Molecular Imprinted Polymer for Atrazine Detection Sensor: Preliminary Study 1483
Ahmad A.L., Lah N.F.C., Low S.C. DOI: 10.3303/CET1545248
   
Guided Assembly of Magnetic Nanocomposite with Open Shell Structure for Water Remediation 1489
Che H., Gwee S., Ahmad A.L., Lim J. DOI: 10.3303/CET1545249
   
Optimisation of Extractive Bioconversion for Green Polymer via Aqueous Two-phase System 1495
Leong Y.K., Koroh F.E., Show P.L., Lan J.C.W., Loh H.-S. DOI: 10.3303/CET1545250
   
Optimisation of Citric Acid Production from a Novel Strain of Aspergillus Niger by Submerged Fermentation 1501
Lee S.Y., Zakry F.A.A., Show P.L. DOI: 10.3303/CET1545251
   
Effect of Process Variables on the Production of Biomass-based Activated Carbons for Carbon Dioxide Capture and Sequestration 1507
Rashidi N.A., Yusup S. DOI: 10.3303/CET1545252
   
Response Surface Methodology Approach for Optimisation of Alkaline Hydrolysis of Jatropha Curcas Oil via Microwave Assisted 1513
Yusuf N.R., Kamil R.N.M., Yusup S. DOI: 10.3303/CET1545253
   
Synthesis and Optimisation of Total Water Network via Material Flow Cost Accounting (mfca)-based Approach 1519
Wan Y.K., Ng D.K.S. DOI: 10.3303/CET1545254
   
Physicochemical Properties of Low Transition Temperature Mixtures in Water 1525
Yiin C.L., Yusup S., Quitain A.T., Uemura Y. DOI: 10.3303/CET1545255
   
Septage Treatment Using Vertical-flow Engineered Wetland: a Critical Review 1531
Tan Y.Y., Tang F.E., Saptoro A., Khor E.H. DOI: 10.3303/CET1545256
   
A Preliminary Basin Scale Evaluation Framework of Potential Sedimentary Basins in Malaysia for Carbon Dioxide Sequestration 1537
Hasbollah D.Z.A., Junin R. DOI: 10.3303/CET1545257
   
Catalytic Pyrolysis of Oil Palm Frond (opf) Using Graphite Nanofiber (gnf) as Catalysts 1543
Wai C.K., Yusup S., Kapor N.Z.A., Chok C. DOI: 10.3303/CET1545258
   
Analysis of Natural Radioactivity in Coal and Ashes from a Coal Fired Power Plant 1549
Jalil S., Rashid M. DOI: 10.3303/CET1545259
   
Energy Profiles of Activated Sludge Degradation of a Xenobiotic Compound 1555
Nguyen L.H., Chong N.M. DOI: 10.3303/CET1545260
   
Comparison of Pollutant Ambient Concentration from Two Air Pollution Control (apc) Strategies in Coal-fired Power Plant 1561
Mokhtar M.M., Taib M.R., Hassim M.H. DOI: 10.3303/CET1545261
   
Ionic Liquid Mixture Design for Carbon Capture Using Property Clustering Technique 1567
Chong F.K., Chemmangattuvalappil N., Foo D.C.Y., Atilhan M., Eljack F.T. DOI: 10.3303/CET1545262
   
Lignocellulosic-based Jatropha Seed Pre-treatment Using Ultrasonic Reactive Extraction for Liquid Biofuel Production 1573
Shuhairi N.M., Zahari M.S.M., Ismail S. DOI: 10.3303/CET1545263
   
Analyzing the Disruption Resilience of Microalgal Multi-functional Bioenergy Systems Using Dynamic Inoperability Input-output Modeling 1579
Benjamin M.F., Ubando A., Razon L., Tan R.R. DOI: 10.3303/CET1545264
   
Screening on Biogas Optimization of Lignocellulose-based Materials Using Enzymatic Hydrolysis Process 1585
Zulkifli Z., Ismail S., Zahari M.S.M., Umor N.A., Aziz N.I.A. DOI: 10.3303/CET1545265
   
Integration of Multiple Effect Evaporators with Background Process 1591
Sharan P., Bandyopadhyay S. DOI: 10.3303/CET1545266
   
Comparison of Parabolic Trough and Linear Fresnel Collectors Based Concentrating Solar Power Plants Using Organic Rankine Cycle 1597
Desai N.B., Bandyopadhyay S. DOI: 10.3303/CET1545267
   
A Pinch Analysis Based Approach to Power System Planning with Carbon Capture 1603
Krishna Priya G.S., Bandyopadhyay S. DOI: 10.3303/CET1545268
   
Utilization of Excess Energy in the Sizing of Photovoltaic-thermal System (pvt) Using Design Space Approach 1609
Thakare M.S., Ghosh P.C., Bandyopadhyay S. DOI: 10.3303/CET1545269
   
Design and Scheduling of CO2 Enhanced Oil Recovery with Geological Sequestration Operations as a Strip Packing Problem 1615
Tapia J.F.D., Lee J.-Y., Ooi R.E.H., Foo D.C.Y., Tan R.R. DOI: 10.3303/CET1545270
   
A Novel Chemical Product Design Framework with the Integration of Safety and Health Aspects 1621
Ten J.Y., Hassim M.H., Chemmangattuvalappil N., Ng D.K.S. DOI: 10.3303/CET1545271
   
Development of a Modified Luus-jaakola Adaptive Random Search Algorithm for Design of Integrated Algal Bioenergy System 1627
Holaysan S.A.K., Razon L.F., Tan R.R. DOI: 10.3303/CET1545272
   
Effects of Microwave Heating on Oil Palm Mesocarp 1633
Chang J.S.L., Law M.C., Chan Y.S., Leo C.P. DOI: 10.3303/CET1545273
   
Optimization Studies on Catalytic Pyrolysis of Empty Fruit Bunch (efb) Using L9 Taguchi Orthogonal Array 1639
Doraiselvan K., Yusup S., Wai C.K., Muda N.S. DOI: 10.3303/CET1545274
   
Dark Fermentation of Crude Glycerol by Locally Isolated Microorganisms to Hydrogen 1645
Haron R., Ahmad M.A., Mat R., Rahman R.A., Tuan Abdullah T.A. DOI: 10.3303/CET1545275
   
Synthesis of Mixed Strategy Games in Eco-industrial Park Using Integrated Analytic Hierarchy Process 1651
Leong Y.K., Tan R.R., Balan P., Chew I.M.L. DOI: 10.3303/CET1545276
   
Systematic Allocation of Cost Savings Among Energy Systems in an Eco-industrial Park 1657
Andiappan V., Tan R.R., Ng D.K.S. DOI: 10.3303/CET1545277
   
Implementation of Energy Efficiency Standards and Labelling for Household Electrical Appliances: a Comparison Among Asian Countries 1663
Rahman K.A., Yusof M.Z.M., Salleh M.N.M., Leman A.M. DOI: 10.3303/CET1545278
   
Cradle to Cradle® Design for 3D Printing 1669
Chong S., Chiu H.-L., Liao Y.-C., Hung S.-T., Pan G.-T. DOI: 10.3303/CET1545279
   
Optimization of Alkaline Lipase Production from Burkholderia Cepacia Through Submerged Fermentation 1675
Liew Y.X., Chan Y.J., Show P.L., Manickam S., Chong M.F. DOI: 10.3303/CET1545280
   
Feedforward Neural Network Modeling of Biomass Pyrolysis Process for Biochar Production 1681
Arumugasamy S.K., Selvarajoo A. DOI: 10.3303/CET1545281
   
Detection of Landfill Gas in Leachate Pipe and Pond of a Semi-aerobic Landfill 1687
Olisa E., Sapari N., Malakahmad A., Orji K.U., Riahi A. DOI: 10.3303/CET1545282
   
Hierarchical Decomposition Approach for Process Synthesis of Integrated Biorefinery 1693
Goh W.S., Ng D.K.S. DOI: 10.3303/CET1545283
   
Environmental Assessment of Ashes Generated from Medical Waste Incineration 1699
Rahim F.L.M., Hassim M.H., Mokhtar M.M. DOI: 10.3303/CET1545284
   
Isolation of Nanocrystalline Cellulose (ncc) from Palm Oil Empty Fruit Bunch (efb): Preliminary Result on FTIR and DLS Analysis 1705
Shanmugarajah B., Kiew P.L., Chew I.M.L., Choong T.S.Y., Tan K.W. DOI: 10.3303/CET1545285
   
Ultrasound Assisted Extraction of Nano Calcium from Waste Eggshell: a Preliminary Study on Crystal Violet Dye Removal 1711
Liew P.E., Shanmugarajah B., Chew I.M.L., Choong T.S.Y., Tan K.W. DOI: 10.3303/CET1545286
Jubilee of Professor Dr Jirí Jaromír Klemeš
 
   
Professor Dr Jirí Jaromír Klemeš: Celebration of the Jubilee in Science and Engineering 1717
Varbanov P.S., Lam H.L., Nemet A. DOI: 10.3303/CET1545287
   
Retrofitting of Large-scale Heat Exchanger Networks within Total Sites Under Uncertainty by Considering Trade-offs Between Investment and Operating Cost 1723
Cucek L., Kravanja Z. DOI: 10.3303/CET1545288
   
Intensification of Heat Transfer Processes 1729
Kapustenko P.O., Kukulka D.J., Arsenyeva O.P. DOI: 10.3303/CET1545289
   
On Stability and Controllability of Processes with Internal Recycle 1735
Mészáros A., Cirka L., Bakošová M., Vasickaninová A. DOI: 10.3303/CET1545290
   
Prospects for Novel Pinch Analysis Application Domains in the 21st Century 1741
Tan R.R., Bandyopadhyay S., Foo D.C.Y., Ng D.K.S. DOI: 10.3303/CET1545291
   
Study for the Reconfiguration of Cooling Water Networks in Retrofit Scenarios 1747
Kim J.K. DOI: 10.3303/CET1545292
   
Mathematical Foundation of Pinch Analysis 1753
Bandyopadhyay S. DOI: 10.3303/CET1545293
   
A Two Step Methodology for Inter-plant Heat Integration Design 1759
Chang C., Wang Y., Feng X., Zhang P. DOI: 10.3303/CET1545294
   
Second Generation Biofuels and Biorefinery Concepts Focusing on Central Europe 1765
Nagy E., Hegedüs I. DOI: 10.3303/CET1545295
   
Generalized Simulation Tools for Coal, Biomass and Organic Waste Gasification Processes 1771
Pierucci S., Ranzi E., Manenti F. DOI: 10.3303/CET1545296
   
Systematic Nonlinear Sensitivity Analysis of Working Fluid Mixtures for Flexible Solar Rankine Cycles 1777
Mavrou P., Papadopoulos A.I., Seferlis P., Linke P., Voutetakis S. DOI: 10.3303/CET1545297
   
A Comparative Study of Carbon Capture for Different Power Plants 1783
Hüser N., Kenig E.Y. DOI: 10.3303/CET1545298
   
Integrated Process and Plant Design Optimization of Industrial Scale Batch Systems: Addressing the Inherent Dynamics Through Stochastic and Hybrid Approaches 1789
Moreno-Benito M., Dombayci C., Espuña A., Puigjaner L. DOI: 10.3303/CET1545299
   
Performance Analysis of Batch Reactive Distillation Column Using Different Measures 1795
Edreder E.A., Emtir M., Mujtaba I.M. DOI: 10.3303/CET1545300
   
Chemical and Process Industries Beyond Gross Domestic Product 1801
Glavic P. DOI: 10.3303/CET1545301
   
What Ecological Indicators Really Measure – the Normative Background of Environmental Evaluation 1807
Narodoslawsky M., Shahzad K. DOI: 10.3303/CET1545302
New Developments
 
   
Environmental Sustainability Analysis of Technologies for Electricity Generation of Renewable Energy Sources in Non-interconnected Areas from Colombia Through the Use of Fuzzy Logic 1813
Rosso Cerón A.M., Kafarov V. DOI: 10.3303/CET1545303
   
Simulation and Energy Integration for a Biorefinery of Valuable Substances and Biofuel from Microalgae Biomass 1819
Pinzón Frias A.Y., Gonzalez-Delgado A., Kafarov V. DOI: 10.3303/CET1545304
   
Gasification of Coal and Heat Integration Modification for Igcc - Integrated Gasification Combined Cycle 1825
Amer D., Gadalla M., Ashour F. DOI: 10.3303/CET1545305
   
Feed Forward Neural Network Model for Production of Isopropyl Myristate in a Semibatch Reactive Distillation: an Evaluation of Extrapolation Prediction Capability 1831
Ali Bashah N.A., Othman M.R., Aziz N. DOI: 10.3303/CET1545306
   
Rational Use of Cooling Water in Heat Exchanger Network on Industrial Site 1837
Tohaneanu M., Plesu V., Iancu P., Bonet-Ruiz A., Bonet-Ruiz J., Muchan B. DOI: 10.3303/CET1545307
   
Assessment of Pre-treatment Methods for Bio-ethanol Production from Sugarcane Bagasse 1843
Crimes J., Fraser D.M., Isafiade A.J., Short M., Bonomi A. DOI: 10.3303/CET1545308
   
Heat Exchanger Network Synthesis Including Detailed Exchanger Designs Using Mathematical Programming and Heuristics 1849
Short M., Isafiade A.J., Fraser D.M., Kravanja Z. DOI: 10.3303/CET1545309
   
Functionality of Element Targeting Approach in Dynamic Biomass Resources Supply Chain System 1855
Lim C.H., Lam H.L. DOI: 10.3303/CET1545310
   
System Modelling of a Combined Air and Hydro Energy Storage System 1861
Bi X., Liu P., Li Z. DOI: 10.3303/CET1545311
   
Capturing Carbon Dioxide Through a Gas Hyydrate-based Process 1867
Partoon B., Sabil K.M., Keong L.K. DOI: 10.3303/CET1545312
   
Energy Efficiency Improvement in the Natural Gas Liquids Fractionation Unit 1873
Rahimi A.N., Mustafa M.F., Zaine M.Z., Ibrahim N., Ibrahim K.A., Yusoff N., Al-Mutairi E.M., Abd. Hamid M.K. DOI: 10.3303/CET1545313
   
Attaining Points for Certification of Green Building Through Choice of Paint 1879
Dodo Y.A., Nafida R., Zakari A., Elnafaty A.S., Nyakuma B.B., Bashir F.M. DOI: 10.3303/CET1545314
   
The Optimal Oil-saving Pathway Until 2030 for China Road Passenger Transportation Based on a Cost-optimisation Model 1885
Li. W, Li Z., Liang J., Liu P., Ma L. DOI: 10.3303/CET1545315
   
Simultaneous Integration and Optimization of an Igcc Plant 1891
Wang M., Pahija E., Liu G., Hui C.-W. DOI: 10.3303/CET1545316
   
Microwave Irradiated Palm Shell-polyetheretherketone Porous Carbons as CO2 Sorbents: Optimization Using Response Surface Methodology (rsm) 1897
Hamza U.D., Nasri N.S., Saidina Amin N., Mohd Zain H., Mohammed J. DOI: 10.3303/CET1545317
   
Retrofit of Crude Pre-heat Train Using MINLP Model Under Non-isothermal Mixing Assumption 1903
Koraviyotin S., Siemanond K. DOI: 10.3303/CET1545318
   
Experimental Study of Short Chain Oils Viscosity as Biodiesel Additives 1909
Bonet-Ruiz A., Plesu V., Bonet-Ruiz J., Tohaneanu M.C., Llorens J., Lepinay M., Dineiro C. DOI: 10.3303/CET1545319
   
Simultaneous Optimisation of Cooler and Pump Networks for Industrial Cooling-water Systems 1915
Sun J., Feng X., Wang Y. DOI: 10.3303/CET1545320
   
CFD Simulations of Transient Fuel Gases Mixing, Leakage and Flammability in Air 1921
Pendyala R., Yong J., Azman I.A., Ilyas S.U. DOI: 10.3303/CET1545321
   
Minimization of Embodied Carbon Footprint from Housing Sector of Malaysia 1927
Gardezi S.S.S., Shafiq N., Abdullah N.A.W., Khamidi M.F., Farhan S.A. DOI: 10.3303/CET1545322
   
Impact of Microalgae on CO2 Bubble Growth and Detachment in Bubble Column Bioreactor 1933
Zhao S., Ding Y.-D., Zhu X., Liao Q., Huang Y., Fu Q. DOI: 10.3303/CET1545323
   
Process Engineering Studies on Synthesis of Gold Nanoparticles by Turkevitch Method 1939
Chakraborty A., Ahamd T., Abdullah B.B., Bhattacharjee S. DOI: 10.3303/CET1545324
   
Evaluation and Control of the Reliability of Weld Joints in Petroleum Products Transportation Pipelines 1945
Abdelbaki N., Bouali E., Gaceb M., Bettayeb M., Bouzid R. DOI: 10.3303/CET1545325
   
Experimental Studies on Fire for Offshore Structures and Its Limitations: a Review 1951
Imran M., Shahir Liew M., Shakir Nasif M. DOI: 10.3303/CET1545326
   
Application of Ionic Liquids in Extractive Distillation of Ethanol – Water System 1957
Graczová E., Steltenpohl P. DOI: 10.3303/CET1545327
   
Incorrect Ternary Liquid–liquid Equilibria Description Versus Extractor Design Simulation 1963
Graczová E., Steltenpohl P., Labovský J. DOI: 10.3303/CET1545328
   
Sustainability Evaluation of Nanotechnology Processing and Production 1969
Mata T.M., Caetano N.S., Martins A.A. DOI: 10.3303/CET1545329