CHEMICAL
ENGINEERING TRANSACTIONS
-
VOL.18
Editor:Jirí Kleme
Copyright © 2009, AIDIC Servizi S.r.l.,
ISBN 978-88-95608-04-4; ISSN 1974-9791
Table of Contents & Authors Index | |
Energy saving technology
|
|
PROCESS INTEGRATION, MODELLING AND OPTIMISATIONFOR ENERGY SAVING AND POLLUTION REDUCTION | 1 |
Friedler F. | >DOI:
10.3303/CET0918001 |
RECENT DEVELOPMENTS IN THE RETROFIT OF HEAT EXCHANGER NETWORKS | 27 |
Smith R., Jobson M., Chen L. | >DOI:
10.3303/CET0918002 |
EXTENDING PINCH ANALYSIS AND PROCESS INTEGRATION INTO PRESSURE AND FLUID PHASE CONSIDERATIONS | 33 |
Gundersen T., Olsson Berstad D., Aspelund A. | >DOI:
10.3303/CET0918003 |
HEAT INTEGRATION OF DISTILLATION COLUMN | 39 |
Hirata K. | >DOI:
10.3303/CET0918004 |
ADVANCED ENERGY SAVING IN REACTION SECTION OF HYDRO-DESULFURIZATION PROCESS WITH SELF-HEAT RECUPERATION TECHNOLOGY | 45 |
Matsuda K., Kawazuishi K., Hirochi Y., Kansha Y., Fushimi C., Shikatani Y., Kunikiyo H., Sato R., Tsutsumi A. | >DOI:
10.3303/CET0918005 |
A NEW DESIGN METHODOLOGY OF AZEOTROPIC DISTILLATION PROCESSES BASED ON SELF-HEAT RECUPERATION | 51 |
Kansha Y., Tsuru N., Fushimi C., Tsutsumi A. | >DOI:
10.3303/CET0918006 |
NEW UNIT FOR CLEAN ENERGY PRODUCTION FROM CONTAMINATED BIOMASS (1 TO 3 MWt) – EXAMPLES OF PROCESS DESIGN | 57 |
Smejkal Q., Sarlej M., Stehlik P. | >DOI:
10.3303/CET0918007 |
THE INFLUENCE OF OPERATIONAL FLEXIBILITY ON THE REDUCTION OF CO2 EMISSIONS IN INDUSTRIAL ENERGY PRODUCTION | 63 |
Siitonen S., Ahtila P. | >DOI:
10.3303/CET0918008 |
A NUMERICAL STUDY OF THE DEVELOPMENT OF TURBULENT FLOW OVER A RECESSED WINDOW-PLANE BLIND SYSTEM | 69 |
Oosthuizen P. | >DOI:
10.3303/CET0918009 |
EXPANDED EMISSIONS AND ENERGY TARGETING: A FURTHER APPLICATION OF CO2 EMISSIONS PINCH ANALYSIS (CEPA) TO THE IRISH ELECTRICITY GENERATION SECTOR | 75 |
Crilly D., Zhelev T. | >DOI:
10.3303/CET0918010 |
A NUMERICAL STUDY OF THE EFFECT OF A BELOW-WINDOW CONVECTIVE HEATER ON THE HEAT TRANSFER RATE FROM A COLD RECESSED WINDOW | 81 |
Oosthuizen P. | >DOI:
10.3303/CET0918011 |
COLD RECOVERY FROM SCRUB COLUMN BOTTOM IN AN LNG PLANT | 87 |
Mahadzir S., Gopinadhan V. | >DOI:
10.3303/CET0918012 |
SYNTHESIS OF ENERGY SAVING INTEGRATED FLOWSHEET FOR SODIUM HYPOPHOSPHITE PRODUCTION | 93 |
Tovazhnyansky L., Kapustenko P., Ulyev L., Boldyryev S. | >DOI:
10.3303/CET0918013 |
RETROFIT DESIGN OF HEAT EXCHANGER NETWORKS OF CRUDE DISTILLATION UNIT | 99 |
Promvitak P., Siemanond K., Bunluesriruang S., Raghareutai V. | >DOI:
10.3303/CET0918014 |
A NEW EMERGING ENERGY TECHNOLOGY - PELAMIS – DEMONSTRATION OF THE ASSESSMENT BY EMINENT TOOL | 105 |
Bulatov I., Perry S., Klemes J. | >DOI:
10.3303/CET0918015 |
DESIGN AND OPTIMIZATION OF DIRECT METHANOL FUEL CELL (DMFC) | 111 |
Basri S., Kamarudin S.K., Daud W.R.W. | >DOI:
10.3303/CET0918016 |
BOOSTING ENERGY CONVERSION EFFICIENCY USING FUEL CELLS. SOFC-ST CHP CONVERSION – ASSESSMENT USING THE EMINENT TOOL | 117 |
Varbanov P., Friedler F. | >DOI:
10.3303/CET0918017 |
Industrial
application & optimal design
|
|
A MECHANISTIC APPROACH FOR HEAT TRANSFER ESTIMATION IN HORIZONTAL NON-BOILING TWO-PHASE PIPE FLOW | 123 |
Tang C., Ghajar A. | >DOI:
10.3303/CET0918018 |
INTEGRATED CONCEPTUAL DESIGN OF HEATING SYSTEM AT A SWEDISH MINING COMPANY | 129 |
Wang C., Nordgren S., Lindblom B., Savonen S., Hansson R., Larsson M. | >DOI:
10.3303/CET0918019 |
MODELLING NATURAL GAS COMBUSTION IN GAS TURBINE: COUPLING 3D COMBUSTION SIMULATIONS WITH CHEMICAL REACTOR NETWORK FOR ADVANCED NOX PREDICTION | 135 |
Kanniche M. | >DOI:
10.3303/CET0918020 |
ENERGY MANAGEMENT OF GAS SEPARATION PLANT BY ENERGY AUDITING PROGRAM | 141 |
Wongsarnpigoon N., Siemanond K., Chaleoysamai Y., Chuvaree R. | >DOI:
10.3303/CET0918021 |
DESIGN AND OPTIMIZATION OF A STAND-ALONE POWER SYSTEM BASED ON RENEWABLE ENERGY SOURCES | 147 |
Ipsakis D., Giannakoudis G., Papadopoulos A., Voutetakis S., Seferlis P. | >DOI:
10.3303/CET0918022 |
OPTIMAL DESIGN OF WASTEWATER TREATMENT SYSTEMS THROUGH A MILP-BASED INITIALIZATION PROCEDURE | 153 |
Teles J., Castro P., Matos H. | >DOI:
10.3303/CET0918023 |
OPTIMAL ENERGY SYSTEM DESIGN UNDER UNCERTAIN PARAMETERS | 159 |
Dubuis M., Marechal F. | >DOI:
10.3303/CET0918024 |
HYDROLYSIS OF STARCH USING FENTON’S REAGENTS AS A KEY FOR WASTE INTEGRATED MANAGEMENT IN A POTATO PROCESSING INDUSTRY | 165 |
Vlyssides A., Barampouti E.M., Mai S., Stamatoglou E., Rigaki K. | >DOI:
10.3303/CET0918025 |
ON THE USE OF PROCESS INTEGRATION TECHNIQUES TO GENERATE OPTIMAL STEAM CYCLE CONFIGURATIONS FOR THE POWER PLANT INDUSTRY | 171 |
Girardin L., Bolliger R., Marechal F. | >DOI:
10.3303/CET0918026 |
THE ASSESSMENT OF ECODESIGN APPLICATION USING THE ANALYTIC HIERARCHY PROCESS: A CASE STUDY IN THREE FURNITURE COMPANIES | 177 |
Borchardt M., Pereira G., Sellitto M. | >DOI:
10.3303/CET0918027 |
OPTIMIZATION OF “MURTILLA” BERRY DRYING IN AN ATMOSPHERIC FREEZE DRYER | 183 |
Reyes A., Bustos R., Vasquez M.B., Scheuermann E. | >DOI:
10.3303/CET0918028 |
A METHODOLOGY FOR DESIGNING INDUSTRIAL WATER NETWORKS | 189 |
Statyukha G., Shakhnovsky A., Jezowski J., Jezowska A., Kvitka A. | >DOI:
10.3303/CET0918029 |
MODELLING AND SIMULATION OF A PACKED SULPHUR DIOXIDE ABSORPTION UNIT USING THE HYDRODYNAMIC ANALOGY APPROACH | 195 |
Brinkmann U., Kenig E., Thiele R., Haas M. | >DOI:
10.3303/CET0918030 |
EXTRACTIVE DISTILLATION OF C7 HYDROCARBON MIXTURE IN THE PRESENCE OF FURFURAL | 201 |
Steltenpohl P., Graczova E., Chlebovec M. | >DOI:
10.3303/CET0918031 |
IMPROVEMENT OF ACCURACY OF THE MULTICOMPONENT VAPOUR–LIQUID EQUILIBRIA PREDICTION FOR THE PURPOSE OF SEPARATION PROCESS MODELLING | 207 |
Graczova E., Steltenpohl P., Chlebovec M., Labovsky J. | >DOI:
10.3303/CET0918032 |
IMPROVING ENERGY EFFICIENCY OF THE NATURAL GAS SEPARATION PLANT BY PINCH ANALYSIS | 213 |
Parisutkul S., Siemanond K., Chuvaree R., Laorrattanasak S. | >DOI:
10.3303/CET0918033 |
GRASSROOTS DESIGN OF HEAT EXCHANGER NETWORKS OF CRUDE DISTILLATION UNIT | 219 |
Promvitak P., Siemanond K., Bunluesriruang S., Raghareutai V. | >DOI:
10.3303/CET0918034 |
OPTIMIZATION OF STEAM NETWORK THROUGH MINLP METHOD: APPLICATION TO UTILITY OF KHARK ISLAND NGL RECOVERY PROJECT | 225 |
Khoshgoftar M.H., Motevallian S.J., Amidpour M. | >DOI:
10.3303/CET0918035 |
THERMOCLINE MANAGEMENT OF STRATIFIED TANKS FOR HEAT STORAGE | 231 |
Walmsley M., Atkins M., Riley J. | >DOI:
10.3303/CET0918036 |
OPTIMAL DESIGN OF THE HEAD OF A PNEUMATIC PULSATOR | 237 |
Urbaniec K., Wernik J., Wolosz K. | >DOI:
10.3303/CET0918037 |
THE EFFECT OF SOLVENT SELECTION ON ENERGY-INTEGRATED EXTRACTIVE DISTILLATION FOR AROMATICS RECOVERY FROM PYROLYSIS GASOLINE: SIMULATION AND OPTIMIZATION | 243 |
Abushwireb F., Elakrami H., Emtir M. | >DOI:
10.3303/CET0918038 |
CO2 Kyoto Protocol,
sequestration, minimisation
|
|
RECENT TRENDS IN PINCH ANALYSIS FOR CARBON EMISSIONS AND ENERGY FOOTPRINT PROBLEMS | 249 |
Tan R.R., Foo D.C.Y. | >DOI:
10.3303/CET0918039 |
REDUCING THE ENERGY PENALTY OF CO2 CAPTURE AND STORAGE USING PINCH ANALYSIS | 255 |
Harkin T., Hoadley A., Hooper B. | >DOI:
10.3303/CET0918040 |
CARBON EMISSIONS PINCH ANALYSIS (CEPA) FOR EMISSIONS REDUCTION IN THE NEW ZEALAND ELECTRICITY SECTOR | 261 |
Atkins M., Walmsley M., Morrison A., Kamp P. | >DOI:
10.3303/CET0918041 |
EXPERIMENTAL STUDY OF CO2 ABSORPTION IN A HOLLOW FIBER MEMBRANE CONTACTOR | 267 |
Kallas T., Chabanon E., Germain G., Bouallou C. | >DOI:
10.3303/CET0918042 |
A SIMULATION-OPTIMIZATION FRAMEWORK FOR EFFICIENT CO2 CAPTURE USING AMINE ABSORPTION | 273 |
Halim I., Srinivasan R. | >DOI:
10.3303/CET0918043 |
COMPARISON OF AMMONIA, MONOETHANOLAMINE, DIETHANOLAMINE AND METHYLDIETHANOLAMINE SOLVENTS TO REDUCE CO2 GREENHOUSE GAS EMISSIONS | 279 |
Gonzalez-Garza D., Rivera-Tinoco R., Bouallou C. | >DOI:
10.3303/CET0918044 |
RECOVERY OF PRIORITY POLLUTANTS FROM AQUEOUS SOLUTIONS THROUGH LIQUID-LIQUID EXTRACTION WITH SIMULTANEOUS TREATMENT OF ACID GASES | 285 |
Shibata C., Palma M. | >DOI:
10.3303/CET0918045 |
Operational research
and supply chain management
|
|
COMMUNICATION AND COOPERATION PLATFORM FOR MULTIDISCIPLINARY PROJECT MANAGEMENT | 291 |
Wozny G., Grote A., Klein A. | >DOI:
10.3303/CET0918046 |
THE CONCEPT OF ENERGY SECURITY IN THE LIGHT OF GLOBAL SECURITY | 297 |
Nagy K. | >DOI:
10.3303/CET0918047 |
REGIONAL RESOURCE MANAGEMENT COMPOSITE CURVE | 303 |
Lam H.L., Varbanov P., Klemes J. | >DOI:
10.3303/CET0918048 |
NEW DEVELOPMENTS FOR ELECTRONIC DOCUMENT MANAGEMENT IN UNIVERSITY POLITEHNICA OF BUCHAREST | 309 |
Costoiu M., Isopescu R., Plesu V., Arsene I., Alesincu H.S., Iancu P. | >DOI:
10.3303/CET0918049 |
SPATIAL INFORMATICS FOR EMISSION REDUCTION | 315 |
Kovacs K.I. | >DOI:
10.3303/CET0918050 |
OPTIMIZATION OF LOGISTICS IN INDUSTRIAL DISTRICTS THROUGH CREATION OF A COMMUNITY OF AGENTS | 321 |
Dell'Orco M., Sassanelli D., Tiso A. | >DOI:
10.3303/CET0918051 |
THE SYSTEM ANALYSIS OF PHOSPHORIC INDUSTRY WASTE UTILIZATION BASED ON CALS-TECHNOLOGIES | 327 |
Bessarabov A., Bulatov I., Kochetygov A., Kvasyuk A. | >DOI:
10.3303/CET0918052 |
Hydrogen Production
from Renewable Resources
|
|
NON-THERMAL PRODUCTION OF PURE HYDROGEN FROM BIOMASS:HYVOLUTION | 333 |
Claassen P., De Vrije T., Urbaniec K. | >DOI:
10.3303/CET0918053 |
EVALUATION OF SUSTAINABLE HYDROGEN PRODUCTION PATHWAYS | 339 |
Miltner A., Friedl A., Wukovits W. | >DOI:
10.3303/CET0918054 |
INTEGRATION STUDY ON A TWO-STAGE FERMENTATION PROCESS FOR THE PRODUCTION OF BIOHYDROGEN | 345 |
Foglia D., Wukovits W., Friedl A., Ljunggren M., Zacchi G., Urbaniec K., Markowski M. | >DOI:
10.3303/CET0918055 |
HEAT INTEGRATION OF A HYDROGEN PLANT CONNECTED WITH SUGAR FACTORY | 351 |
Markowski M., Urbaniec K., Budek A., Wukovits W., Friedl A., Ljunggren M., Zacchi G. | >DOI:
10.3303/CET0918056 |
INVESTIGATION OF INFLUENCING FACTORS FOR BIOLOGICAL HYDROGEN PRODUCTION BY RHODOBACTER CAPSULATUS IN TUBULAR PHOTO-BIOREACTORS | 357 |
Boran E., Ozgur E., Gebicki J., Van Der Burg J., Yucel M., Gunduz U., Modigell M., Eroglu I. | >DOI:
10.3303/CET0918057 |
DEVELOPMENT OF PHOTOBIOREACTORS FOR ANOXYGENIC PRODUCTION OF HYDROGEN BY PURPLE BACTERIA | 363 |
Gebicki J., Modigell M., Schumacher M., Van Der Burg J., Roebroeck E. | >DOI:
10.3303/CET0918058 |
ENERGY STORAGE IN ISLANDS MODELLING PORTO SANTO HYDROGEN SYSTEM | 367 |
Martins R., Krajacic G., Alves L., Duic N., Toste Azevedo J., Carvalho M.D.G. | >DOI:
10.3303/CET0918059 |
AN ENERGY SYSTEMS ENGINEERING APPROACH TO POLYGENERATION AND HYDROGEN INFRASTRUCTURE SYSTEMS ANALYSIS & DESIGN | 373 |
Liu P., Pistikopoulos E.N., Li Z. | >DOI:
10.3303/CET0918060 |
DETERMINATION OF THE REAL POWER LOSS FOR A STEAM TURBINE | 379 |
Holmberg H., Ruohonen P., Ahtila P. | >DOI:
10.3303/CET0918061 |
HYDROGEN PRODUCTION BY R. CAPSULATUS ON DARK FERMENTER EFFLUENT OF POTATO STEAM PEEL HYDROLYSATE | 385 |
Afsar N., Ozgur E., Gurgan M., De Vrije T., Yucel M., Gunduz U. | >DOI:
10.3303/CET0918062 |
EFFECT OF PROCESS INTEGRATION ON THE EXERGY BALANCE OF A PROCESS FOR BIOLOGICAL HYDROGEN PRODUCTION | 391 |
Modarresi A., Wukovits W., Friedl A. | >DOI:
10.3303/CET0918063 |
NOVEL MEMBRANE CONTACTOR FOR GAS UPGRADING IN BIOHYDROGEN PRODUCTION | 397 |
Beggel F., Modigell M., Shalygin M., Teplyakov V., Zenkevitch V. | >DOI:
10.3303/CET0918064 |
Process integration
for sustainable development
|
|
WATER REUSE PROJECT SELECTION – A RETROFIT PATH TO WATER AND ENERGY SAVINGS | 403 |
Alva-Argaez A., Savulescu L. | >DOI:
10.3303/CET0918065 |
OPTIMISATION BASED APPROACH FOR DESIGNING FLEXIBLE WATER USAGE NETWORK | 409 |
Poplewski G., Jezowski J. | >DOI:
10.3303/CET0918066 |
OPTIMISATION OF THE COOLING SYSTEMS IN INDUSTRY IN CHP PRODUCTION | 415 |
Hippinen I., Ruohonen P., Nousiainen , Hakala , Manninen , Soderman , Aittomaki , Makinen , Ahtila P. | >DOI:
10.3303/CET0918067 |
INCORPORATION OF SCHEDULING CONSIDERATIONS IN RETROFITTING DESIGN OF HEAT EXCHANGE NETWORKS | 421 |
Al-Mutairi E., El-Halwagi M. | >DOI:
10.3303/CET0918068 |
THE ENVIRONMENTAL PERFORMANCE STRATEGY MAP:LCA BASED STRATEGIC DECISION MAKING | 427 |
De Benedetto L., Klemes J. | >DOI:
10.3303/CET0918069 |
TESTING OF HEAT LOAD MODEL FOR PULP AND PAPER IN TWO TMP CASES | 433 |
Ruohonen P., Hakala J., Ahtila P. | >DOI:
10.3303/CET0918070 |
ENERGY AND ENERGY-BASED GHG EMISSION TARGETING AND OPTIMAL PINCH IDENTIFICATION USING CONSTRAINT LOGIC PROPAGATION | 439 |
Noureldin M.B., Al-Owaidah M., Al-Gwaiz M., Al-Qahtani S. | >DOI:
10.3303/CET0918071 |
THE CHALLENGE OF INTEGRATING NON-CONTINUOUS PROCESSES – MILK POWDER PLANT CASE STUDY | 445 |
Atkins M., Walmsley M., Neale J. | >DOI:
10.3303/CET0918072 |
DEVELOPMENT AND IMPLEMENTATION OF AN AUTOMATED MONITORING SYSTEM FOR IMPROVED BIOETHANOL PRODUCTION | 451 |
Rivera E.A.C., Farias F.J., Atala D.I.P., Ramos R.D.A., Carvalho A.D.A., Maciel Filho R. | >DOI:
10.3303/CET0918073 |
ADVANCED HENS DESIGN FOR MULTI-PERIOD OPERATION USING P-GRAPH | 457 |
Friedler F., Varbanov P., Klemes J. | >DOI:
10.3303/CET0918074 |
IMPROVE OF ENERGY EFFICIENCY A TOOL FOR REDUCTION OF CO2 EMISSION | 463 |
Varga Z., Kubovics Stocz K., Rabi I., Lorinczova M., Polakovicova M. | >DOI:
10.3303/CET0918075 |
AN ANALYSIS FOR IDENTIFYING ENERGY SAVING OPPORTUNITIES FOR A PETROCHEMICAL CLUSTER IN TIMES OF CLIMATE CHANGE | 469 |
Johansson D., Harvey S. | >DOI:
10.3303/CET0918076 |
DIESEL PRODUCTION TECHNOLOGY FROM RENEWABLE SOURCES – SECOND GENERATION BIOFUELS | 475 |
Mikulec J., Cvengros J., Jorikova L., Banic M., Kleinova A. | >DOI:
10.3303/CET0918077 |
STUDY ON ALUMINUM PLATES COATED WITH ZIRCONIA-SOL AND CATALYST MIXTURE FOR METHANOL STEAM-REFORMING IN A RECTANGULAR REACTOR | 481 |
Sie S.L., Tang J.K., Chang J.S. | >DOI:
10.3303/CET0918078 |
PROCESS SIMULATION OF REACTIVE DISTILLATION IN DIVIDING WALL COLUMN FOR ETBE SYNTHESIS PROCESS | 487 |
Bumbac G., Ene A., Isopescu R., Toma A. | >DOI:
10.3303/CET0918079 |
NOVEL FLUX-CALCINATION PROCESS OF KIESELGUHR AVOIDING FORMATION OF CRYSTALLINE MATERIAL | 493 |
Smejkal Q., Schleicher T., Russ W., Martin A. | >DOI:
10.3303/CET0918080 |
EXPERIMENTAL AND ECONOMICAL APPROACH TO THE INTEGRATION OF A KW-SCALE CH4-ATR REACTOR WITH A WGS STAGE | 499 |
Ciambelli P., Palma V., Palo E., Iaquaniello G. | >DOI:
10.3303/CET0918081 |
INFLUENCE OF ENVIRONMENTAL, ECONOMIC AND SOCIAL FACTORS ON A SITE SELECTION INDEX METHODOLOGY FOR A TECHNOLOGICAL CENTRE FOR RADIOACTIVE WASTE MANAGEMENT | 505 |
Guidi G., Gugliermetti F., Astiaso Garcia D., Violante A.C. | >DOI:
10.3303/CET0918082 |
TAILOR MADE SOLUTIONS FOR LOCAL INDUSTRIAL CENTERS | 511 |
Tomo H., Eder M., Sandor N., Halsz L., Narodoslawsky M. | >DOI:
10.3303/CET0918083 |
SCHEDULING FOR EFFICIENT REDUCTION OF FIBER INDUSTRIAL EVAPORATIVE LAGOONS | 517 |
Seita A.R., Matos H., Fernandes C., Nunes C.P., Silveirinha B. | >DOI:
10.3303/CET0918084 |
Sustainable processing
and production
|
|
NATURAL LAWS DOMINATE THE HUMAN SOCIETY | 523 |
Glavic P. | >DOI:
10.3303/CET0918085 |
ENERGY ALLOCATION AND ENERGY INTENSITY ESTIMATES FOR THE U.S. ORGANIC CHEMICALS INDUSTRY | 531 |
Ozalp N., Hyman B. | >DOI:
10.3303/CET0918086 |
UTILISATION OF GLYCEROL TO PLATFORM CHEMICALS WITHIN THE BIOREFINERY CONCEPT: A CASE FOR SUCCINATE PRODUCTION | 537 |
Vlysidis A., Binns M., Webb C., Theodoropoulos C. | >DOI:
10.3303/CET0918087 |
ENTHALPY OF FORMATION AS PART OF ENERGY EFFICIENCY ANALYSES - CASE: OLEFIN PLANT | 543 |
Tuomaala M., Holmberg H., Auvinen H. | >DOI:
10.3303/CET0918088 |
Industrial & experimental
studies
|
|
ASPECTS OF LONG TERM INDUSTRY-UNIVERSITY COOPERATION PROJECT | 549 |
Wozny G., Thielert H., Arellano-Garcia H. | >DOI:
10.3303/CET0918089 |
SINGLE-STEP BIOCONVERSION OF STARCH TO BIO-ETHANOL BY COCULTURE OF TAPAI RAGI AND SACCHAROMYCES CEREVISIAE | 557 |
Azmi A.S., Hasan M., Mel M., Cheng N.G. | >DOI:
10.3303/CET0918090 |
DESIGN ENGINEERING, IMPLEMENTATION AND CONTROL OF A FLEXIBLE CYCLIC DEACTIVATION UNIT | 563 |
Kostaras K., Ziogou C., Lappas A., Voutetakis S. | >DOI:
10.3303/CET0918091 |
PRIMARY FRAGMENTATION OF COAL PARTICLES AT HIGH HEATING RATE | 569 |
Senneca O., Russo S., Chirone R. | >DOI:
10.3303/CET0918092 |
EFFECT OF RIGIDIZED TEXTURED SURFACES ON HEAT TRANSFER AND FOULING OF ENHANCED TUBES | 575 |
Kukulka D., Fuller K.G. | >DOI:
10.3303/CET0918093 |
CFD applications
in the process intensification
|
|
A NUMERICAL STUDY ON THE RESIDENCE TIME DISTRIBUTION IN LOW AND MODERATE TUBE/PARTICLE DIAMETER RATIO FIXED BED REACTORS | 581 |
Atmakidis T., Kenig E. | >DOI:
10.3303/CET0918094 |
EXPERIMENTAL AND NUMERICAL ANALYSIS OF WALL HEAT TRANSFER IN NON-PREMIXED GAS COMBUSTOR | 587 |
Vondal J., Hajek J. | >DOI:
10.3303/CET0918095 |
CFD-BASED INVESTIGATION OF CARBON DIOXIDE ABSORPTION IN A FALLING-FILM MICRO ABSORBER | 593 |
Chasanis P., Lautenschleger A., Kenig E. | >DOI:
10.3303/CET0918096 |
SIMULATION OF BIOMASS DRYING IN FIXED BED OF EXPERIMENTAL GRATE COMBUSTION REACTOR | 599 |
Jurena T., Recman M., Hajek J. | >DOI:
10.3303/CET0918097 |
CFD SIMULATION OF BUBBLE COLUMNS USING THE VOF MODEL - COMPARISON OF COMMERCIAL AND OPEN SOURCE SOLVERS WITH AN EXPERIMENT | 605 |
Horvath A., Jordan C., Lukasser M., Kuttner C., Makaruk A., Harasek M. | >DOI:
10.3303/CET0918098 |
Integration of renewables,
biomass and energy conversion technologies
|
|
ECOLOGICAL IMPACT OF RENEWABLE RESOURCE BASED ENERGY TECHNOLOGIES | 611 |
Eder M., Sandor N., Kettl K.H., Narodoslawsky M. | >DOI:
10.3303/CET0918099 |
BIOGAS UPGRADING FOR TRANSPORTATION PURPOSES – OPERATIONAL EXPERIENCES WITH AUSTRIA’S FIRST BIO-CNG FUELLING STATION | 617 |
Miltner M., Makaruk A., Harasek M. | >DOI:
10.3303/CET0918100 |
AN EFFICIENT UTILIZATION OF INEDIBLE FRUIT FOR FOSSIL SUBSTITUTION | 623 |
Sinthupinyo P., Hayashi T., Habaki H., Egashira R. | >DOI:
10.3303/CET0918101 |
OPTIMAL CONFIGURATION OF ISLAND’S ENERGY SUPPLY SYSTEM | 629 |
Pereira S., Segurado R., Costa A., Pipio A., Alves L. | >DOI:
10.3303/CET0918102 |
ENERGY CONCEPTION OF AN INTEGRATED SYSTEM – I. ANALYSIS OF AVAILABLE DATA AND ITS PROCESSING | 635 |
Drapela T., Pavlas M., Popela P., Boran J., Stehlik P. | >DOI:
10.3303/CET0918103 |
ECONOMIC IMPACT OF THE INTEGRATION OF ALTERNATIVE VEHICLE TECHNOLOGIES INTO THE NEW ZEALAND VEHICLE FLEET | 641 |
Leaver J., Gillingham K. | >DOI:
10.3303/CET0918104 |
DESIGN OF WIND POWER GENERATION SYSTEMS FOR INDUSTRIAL APPLICATION INCORPORATING RESOURCE UNCERTAINTY | 647 |
Roy A., Kedare S.B., Bandyopadhyay S. | >DOI:
10.3303/CET0918105 |
A NUMERICAL STUDY OF THE PERFORMANCE OF AN AUTOTHERMAL REFORMER FOR USE IN A FUEL CELL POWERED AUXILIARY POWER UNIT FOR TRUCKS | 653 |
Oosthuizen P., Hussain S., Peppley B. | >DOI:
10.3303/CET0918106 |
ANSWERING THE QUESTION OF LOCAL BIOMASS DEPLOYMENT: THE USE OF ENERGY MODELLING WITH CASE STUDY FOR NON INDUSTRIAL CUSTOMERS | 659 |
Anglani N., Muliere G. | >DOI:
10.3303/CET0918107 |
REMOVAL OF TAR IN BIOMASS GASIFICATION PROCESS USING DIFFERENT CARBON MATERIALS | 665 |
Al Dury S.S.K. | >DOI:
10.3303/CET0918108 |
WASTE TO ENERGY – AN EVALUATION OF THE ENVIRONMENTAL IMPACT | 671 |
Pavlas M., Bebar L., Kropac J., Stehlik P. | >DOI:
10.3303/CET0918109 |
COFERMENTATION OF KITCHEN WASTE AND SEWAGE SLUDGE | 677 |
Beno Z., Boran J., Houdkova L., Dlabaja T., Sponar J. | >DOI:
10.3303/CET0918110 |
ENHANCEMENT OF LIQUEFACTION OF LOW RANK COAL BY THE CATALYTIC EFFECTS OF CATION EXCHANGED TO COAL | 683 |
Sugano M., Suzuki K., Ohki-Ikemizu R., Mashimo K. | >DOI:
10.3303/CET0918111 |
ENERGY CONCEPTION OF AN INTEGRATED SYSTEM – II. ALTERNATIVE SOLUTIONS AND OPTIMIZATION | 689 |
Popela P., Drapela T., Pavlas M., Tous M. | >DOI:
10.3303/CET0918112 |
Batch processes
|
|
SYNTHESIS OF THE PROPERTY-BASED WATER-USING NETWORKS IN BATCH PROCESS INDUSTRIES | 695 |
Chen C.L., Lee J.Y., Ng D.K.S., Foo D.C.Y. | >DOI:
10.3303/CET0918113 |
PROFITABILITY ANALYSIS FOR BATCH REACTIVE DISTILLATION PROCESS BASED ON FIXED PRODUCT DEMAND | 701 |
Edreder E., Mujtaba I.M., Emtir M. | >DOI:
10.3303/CET0918114 |
OPERATION AND CONTROL OF NEW PRESSURE SWING BATCH DISTILLATION SYSTEMS | 707 |
Kopasz A., Modla G., Lang P. | >DOI:
10.3303/CET0918115 |
HETEROAZEOTROPIC BATCH DISTILLATION IN A NEW DOUBLE-COLUMN SYSTEM | 713 |
Denes F., Lang P., Joulia X. | >DOI:
10.3303/CET0918116 |
KINETIC PARAMETERS ESTIMATION FOR PRECIPITATION USING CONTINUOUS APPROXIMATION FUNCTIONS AND GENETIC ALGORITMS | 719 |
Isopescu R., Lavric V. | >DOI:
10.3303/CET0918117 |
Dynamic, flexible
and sustainable plant operation
|
|
THE ROLE OF PREDICTIVE MODELS IN ENERGY EFFICIENCY OPTIMIZATION OF COMPLEX INDUSTRIAL PLANTS | 725 |
Marik K., Rojicek J., Stluka P. | >DOI:
10.3303/CET0918118 |
CONTROL ANALYSIS FOR PROCESSES WITH INTERNAL RECYCLE | 731 |
Meszaros A., Cirka L. | >DOI:
10.3303/CET0918119 |
EVENT DRIVEN PROCESS SIMULATION OF PIPELINE NETWORKS | 737 |
Heckl I., Kalocsai P., Halasz L., Kalauz K. | >DOI:
10.3303/CET0918120 |
MULTI-PERIOD HYDROGEN MANAGEMENT | 743 |
Ahmad M.I., Jobson M., Zhang N. | >DOI:
10.3303/CET0918121 |
MOLECULAR MANAGEMENT OF GASOLINE STREAMS | 749 |
Wu Y., Zhang N. | >DOI:
10.3303/CET0918122 |
e-learning, e-teaching
and e-knowledge
|
|
THE DIGITAL REVOLUTION AND THE TEACHING AND LEARNING PROCESS IN CHEMICAL ENGINEERING | 755 |
Perry S., Bulatov I. | >DOI:
10.3303/CET0918123 |
KNOW-HOW AND QUALITY ASSURANCE USING A WEB BASED REUSE-ATLAS | 761 |
Hady L., Wozny G. | >DOI:
10.3303/CET0918124 |
THE ROLE OF STRUCTURED MULTIMEDIA IN IMPROVING THE TEACHING IMPACT IN PROCESS INTEGRATION | 767 |
Sikos L., Klemes J., Varbanov P., Lam H.L. | >DOI:
10.3303/CET0918125 |
REMOTE CONTROL EXPERIMENTS IN CHEMICAL ENGINEERING EDUCATION | 773 |
Josceanu A.M., Postelnicescu P., Dumitrescu A.M., Plesu V., Stefan C. | >DOI:
10.3303/CET0918126 |
WEB-BASED OBJECT-ORIENTED MODELLING ENVIRONMENT FOR THE SIMULATION OF CHEMICAL PROCESSES | 779 |
Kuntsche S., Arellano-Garcia H., Wozny G. | >DOI:
10.3303/CET0918127 |
Heat exchangers as
equipment and integrated items
|
|
EVALUATION OF SURFACE COATINGS ON HEAT EXCHANGERS | 785 |
Kukulka D., Leising P. | >DOI:
10.3303/CET0918128 |
MATHEMATICAL MODELLING AND OPTIMAL DESIGN OF PLATE-AND-FRAME HEAT EXCHANGERS | 791 |
Arsenyeva O., Tovazhnyansky L., Kapustenko P., Khavin G. | >DOI:
10.3303/CET0918129 |
THERMODYNAMIC INVESTIGATION OF IRAN LNG COGENERATION POWER PLANT | 797 |
Hamlehdar O., Amidpour M. | >DOI:
10.3303/CET0918130 |
OPTIMISATION OF HEAT EXCHANGER NETWORKS MAINTENANCE | 803 |
Sikos L., Klemes J. | >DOI:
10.3303/CET0918131 |
CONTRIBUTION TO ANALYTICAL CALCULATION METHODS FOR PREDICTION OF UNIFORM FLUID FLOW DIVIDING IN TUBULAR DISTRIBUTOR | 809 |
Turek V., Kohoutek J., Jegla Z., Stehlik P. | >DOI:
10.3303/CET0918132 |
DESIGN OF A CHILLER SYSTEM FOR SPECIFIC THEATRE AIR-CONDITIONING APPLICATION | 815 |
Gavernik M., Jegla Z., Stehlik P. | >DOI:
10.3303/CET0918133 |
SOFTWARE APPLICATION FOR SUPPORTING OF CAE IN PROCESS ENGINEERING: AUTOMATED CHOICE OF THE SUITABLE REBOILER TYPE | 821 |
Kilkovsky B., Kohoutek J., Jegla Z., Stehlik P. | >DOI:
10.3303/CET0918134 |
CONTROL OF PLATE HEAT EXCHANGER OUTLET TEMPERATURE USING BUTTERFLY VALVE AND PARAMETRIC MODEL PREDICTIVE CONTROL TECHNIQUE | 827 |
Kapustenko P., Dobromyslova O., Dobromyslov O., Perevertaylenko O., Arsenyeva O., Ilyunin O., Shabanov E. | >DOI:
10.3303/CET0918135 |
Waste minimisation,
processing and management
|
|
PROCESS INTEGRATION AND CONCEPTUAL DESIGN WITH PROCESS SIMULATORS | 833 |
Kim J.K. | >DOI:
10.3303/CET0918136 |
THERMAL DEGRADATION MECHANISM OF POLYMER MODIFIED ASPHALT | 839 |
Sugano M., Iwabuchi Y., Watanabe T., Kajita J., Iwai S., Hirano K. | >DOI:
10.3303/CET0918137 |
MICROBIAL DEGRADATION OF RECALCITRANT ORGANICS FROM RADIOACTIVE WASTE USING INDIGENOUS CULTURES OF NAPHTHALENE DEGRADING BACTERIA | 845 |
Tikilili P.V., Chirwa E. | >DOI:
10.3303/CET0918138 |
WASTE WATER NETWORK RETROFITTING THROUGH OPTIMAL PLACEMENT OF REGENERATION UNIT | 851 |
Iancu P., Plesu V., Lavric V. | >DOI:
10.3303/CET0918139 |
AUTOMATED TARGETING FOR RESOURCE CONSERVATION NETWORK WITH INTERCEPTION PLACEMENT | 857 |
Ng D.K.S., Foo D.C.Y., Tan R.R. | >DOI:
10.3303/CET0918140 |
CR(VI) REDUCTION IN PACKED-COLUMN MICROCOSM REACTORS USING CHROMIUM REDUCING MICROORGANISMS | 863 |
Molokwane P., Chirwa E. | >DOI:
10.3303/CET0918141 |
A MASS-LOAD-BASED PROCEDURE FOR MINIMIZING TOTAL FLOWRATE OF THE WATER SYSTEMS WITH SINGLE CONTAMINANT | 869 |
Liu Z.Y., Zhang Y., Yang Y. | >DOI:
10.3303/CET0918142 |
FIBER RECOVERY FROM END-OF-LIFE APPAREL | 875 |
Bartl A., Haner A.S. | >DOI:
10.3303/CET0918143 |
MAXIMIZING THE CAPACITY OF WASTEWATER TREATMENT - STUDY OF AUTOTHERMAL THERMOPHILIC AEROBIC DIGESTION | 881 |
Rojas J., Zhelev T. | >DOI:
10.3303/CET0918144 |
A SWITCHING PRESSURE APPROACH IN SIMULATION AND OPTIMIZATION OF A REVERSE OSMOSIS UNIT | 887 |
Cerrato C., Reverberi A., Dovi V., Bruzzone A. | >DOI:
10.3303/CET0918145 |
Pulp & paper
|
|
INFLUENCES OF SHORT-TERM VARIATIONS ON ENERGY-SAVING OPPORTUNITIES IN A PULP MILL | 893 |
Persson J., Berntsson T. | >DOI:
10.3303/CET0918146 |
DESIGN OF WATER AND HEAT RECOVERY NETWORKS FOR THE SIMULTANEOUS MINIMISATION OF WATER AND ENERGY CONSUMPTION | 899 |
Polley G., Picon-Nunez M. | >DOI:
10.3303/CET0918147 |
PAPER MACHINE PRODUCTION EFFICIENCY AS A KEY PERFORMANCE INDICATOR OF ENERGY EFFICIENCY | 905 |
Sivill L., Ahtila P. | >DOI:
10.3303/CET0918148 |
BIOREFINING OF LIGNOCELLULOSIC RESIDUES USING ETHANOL ORGANOSOLV PROCESS | 911 |
Garcia A., Egues I., Toledano A., Gonzalez M., Serrano L., Labidi J. | >DOI:
10.3303/CET0918149 |
PATHWAYS TO A SUSTAINABLE EUROPEAN PULP AND PAPER INDUSTRY: TRADE-OFFS BETWEEN DIFFERENT TECHNOLOGIES AND SYSTEM SOLUTIONS FOR CHEMICAL KRAFT PULP MILLS | 917 |
Jonsson J., Algehed J. | >DOI:
10.3303/CET0918150 |
EXPLOITING INHERENT PROCESS FLEXIBILITY FOR THE REDUCTION OF WATER AND ENERGY CONSUMPTION. APPLICATION TO THE PULP AND PAPER INDUSTRY | 923 |
Martinez-Patino J., Picon-Nunez M., Serra L.M., Verda V. | >DOI:
10.3303/CET0918151 |
Combined heat & power
and combined cycle
|
|
THERMODYNAMIC INVESTIGATION OF A NEW TYPE HIGHLY EFFECTIVE GAS TURBINE OPERATING PARTIALLY AT ISOTHERMAL EXPANSION | 929 |
Kolev N., Kolev D., Dzhonova-Atanasova D., Popov D. | >DOI:
10.3303/CET0918152 |
POWER PLANT OPTIMIZATION STUDY IN IRAN LNG PROJECT THROUGH MINLP METHOD | 935 |
Khoshgoftar M.H., Mazhari V., Amidpour M. | >DOI:
10.3303/CET0918153 |
PROCESS INTEGRATION AS AN OPTIMIZATION TOOL IN CLEAN COAL TECHNOLOGY: A FOCUS ON IGCC | 941 |
Madzivhandila V., Majozi T., Zhelev T. | >DOI:
10.3303/CET0918154 |
EVALUATION OF GE, SIEMENS AND ALSTOM GAS TURBINES IN POWER AND STEAM PRODUCTION OF IRAN LNG PROJECT | 947 |
Mazhari V., Khoshgoftar M.H., Amidpour M. | >DOI:
10.3303/CET0918155 |
ENERGY-SAVING TECHNOLOGY PERFORMANCE AND EFFICIENCY INDEXES | 953 |
Meshalkin V. | >DOI:
10.3303/CET0918156 |
Clean technologies
- Low emissions technologies
|
|
NEW CONTRIBUTIONS TO MODELLING AND SIMULATION OF TAME SYNTHESIS BY CATALYTIC DISTILLATION | 959 |
Bonet-Ruiz A.-.E., Bonet-Ruiz J., Bozga G., Plesu V. | >DOI:
10.3303/CET0918157 |
AN OVERVIEW OF SOLAR THERMOCHEMICAL HYDROGEN, CARBON NANOMATERIALS AND METALS PRODUCTION TECHNOLOGIES | 965 |
Ozalp N., Epstein M., Kogan A. | >DOI:
10.3303/CET0918158 |
Thermal treatment
of waste incl. waste to energy
|
|
WASTE-TO-ENERGY (W2E) SOFTWARE – A SUPPORT TOOL FOR DECISION MAKING PROCESS | 971 |
Tous M., Bebar L., Houdkova L., Pavlas M., Stehlik P. | >DOI:
10.3303/CET0918159 |
EXPERIMENTAL REACTOR FOR ANALYSING BIOMASS COMBUSTION PROPERTIES | 977 |
Recman M., Hajek J. | >DOI:
10.3303/CET0918160 |
DEWATERING OF THERMALLY DISINTEGRATED SEWAGE SLUDGE | 983 |
Elsaesser T., Boran J., Houdkova L. | >DOI:
10.3303/CET0918161 |
MATHEMATICAL MODELLING OF GASIFICATION AND COMBUSTION OF SOLID FUELS AND WASTES | 989 |
Cuoci A., Faravelli T., Frassoldati A., Grana R., Pierucci S., Ranzi E., Sommariva S. | >DOI:
10.3303/CET0918162 |