Chemical Engineering Transactions-VOL 21
Editors:
Jirí J. Klemeš, Hon Loong Lam, Petar S. Varbanov
Copyright © 2010, AIDIC Servizi S.r.l.,
ISBN 978-88-95608-05-1; ISSN 1974-9791

Table of Contents & Authors Index
DOI
   
Modelling and optimisation issues of the energy systems of the future 1
Pistikopoulos E. N., Liu P., Georgiadis M. >DOI: 10.3303/CET1021001
   
Sustainability Indicators: Using the Process Analysis Method to Select Indicators for Assessing Production Operations 7
Chee Tahir A., Darton R. C. >DOI: 10.3303/CET1021002
   
Energy Saving for Ethylene Process by Adsorption Heat Pump 13
Hirata K. >DOI: 10.3303/CET1021003
   
Heat Integrated Distillation System Design 19
Smith R. >DOI: 10.3303/CET1021004
   
Life Cycle Assessment of a Concentrated Solar Power Plant for the Production of Enriched Methane by Steam Reforming Process 25
Piemonte V., De Falco M., Giaconia A., Tarquini P. >DOI: 10.3303/CET1021005
   
Advanced Energy Saving in Distillation Process with Self-heat Recuperation Technology 31
Matsuda K., Kawazuishi K., Kansha Y., Fushimi C., Nagao M., Kunikiyo H., Masuda F., Tsutsumi A. >DOI: 10.3303/CET1021006
   
An Investigation of the Performance of a Hybrid Turboexpander-fuel Cell System for Power Recovery at Natural Gas Pressure Reduction Stations 37
Howard C., Oosthuizen P. H., Peppley B. >DOI: 10.3303/CET1021007
   
A New Design Methodology for Heat Integrated Distillation Column Based Self-heat Recuperation 43
Kansha Y., Kishimoto A., Tsutsumi A. >DOI: 10.3303/CET1021008
   
Total Site Targeting Accounting for Individual Process Heat Transfer Characteristics 49
Fodor Z., Perry S., Varbanov P., Klemeš J. >DOI: 10.3303/CET1021009
   
Application of Chemical Heat Transformer for Co-production System 55
Koyanagi Y., Kansha Y., Kishimoto A., Fushimi C., Tsutsumi A. >DOI: 10.3303/CET1021010
   
Power Generation from Low Enthalpy Geothermal Fields by Design and Selection of Efficient Working Fluids for Organic Rankine Cycles 61
Papadopoulos A. J., Seferlis P., Voutetakis S., Linke P. >DOI: 10.3303/CET1021011
   
Modelling of Divided Wall Column 67
Szabó L., Balaton M. G., Németh S., Szeifert F. >DOI: 10.3303/CET1021012
   
Neural Network Predictive Control of a Heat Exchanger 73
Vasickaninová A., Bakošová M., Mészáros A., Klemeš J. >DOI: 10.3303/CET1021013
   
Energy Saving by the Intensification of the Electro- Fenton Process for Water Treatment Using Boron Doped Diamond Electrode 79
Siminiceanu I., Alexandru C. I., Brillas E. >DOI: 10.3303/CET1021014
   
Impact Analysis of the Spanish Electric Energy Market Liberalization on Chlor-alkali Industry 85
Aldaco R., Onandía R., Irabien A. >DOI: 10.3303/CET1021015
   
Effect of a Horizontal Frame Member on Transitional Heat Transfer from a Recessed Window to a Room 91
Oosthuizen P. H. >DOI: 10.3303/CET1021016
   
Improving the Energy Efficiency of Industrial Processes Using Mathematical Modelling 97
Kuntzsch S., Zwicknagl R., Berghoff A., Blesgen A., Hass V. C. >DOI: 10.3303/CET1021017
   
A New Approach for Water Cost Reduction of Cooling Water System in Oil Refinery 103
Tarighaleslami A. H., Hosseinzadeh Hesas R., Omidkhah M. R. >DOI: 10.3303/CET1021018
   
Analysis of Energy Consumption in Professional Laundry Care Process 109
Bobák P., Pavlas M., Kšenzuliak V., Stehlik P. >DOI: 10.3303/CET1021019
   
Ground Source Heat Pump Technology Use for Heating and Air-conditioning of a Commercial/residential Building 115
Dejanovic I., Matijaševic L., Glasnovic Z. >DOI: 10.3303/CET1021020
   
Improving Energy Efficiency in Natural Gas Refineries, Using Exergy Analysis 121
Panjeshahi M. H., Harati F., Nouzari M. M. >DOI: 10.3303/CET1021021
   
Dynamic Behavior of an Internally Heat-integrated Distillation Column (HIDIC) 127
Matsuda K., Iwakabe K., Ohmori T., Nakaiwa M. >DOI: 10.3303/CET1021022
   
Sensitivity Analysis of Thermoelectric Module Performance with Respect to Geometry 133
Lavric E. D. >DOI: 10.3303/CET1021023
   
Analysis of the Energy Efficiency Gain Obtainable by Incorporating Indirect Heat Transfer Into Heat Pump Drying Technology 139
Catton W. R., Sun Z. F., Carrington C. G. >DOI: 10.3303/CET1021024
   
Shallow Spouted Beds for Drying of Sludge from the Paper Industry 145
San Jose M. J., Alvarez S., Ortiz de Salazar A., Morales A., Bilbao J. >DOI: 10.3303/CET1021025
   
Multi-parametric Control and Optimisation of a Small Scale Chp 151
Konstantinidis D. A., Varbanov P., Klemeš J. >DOI: 10.3303/CET1021026
   
Life Cycle Assessment of Electricity Production from Natural Gas Combined Cycle 157
Banar M., Cokaygil Z. >DOI: 10.3303/CET1021027
   
Hydrogen Production from Natural Gas: Auto-thermal Reforming and CO2 Capture 163
De Castro J., Rivera-Tinoco R., Bouallou C. >DOI: 10.3303/CET1021028
   
Carbon Dioxide Absorption in Biphasic Amine Solvents with Enhanced Low Temperature Solvent Regeneration. 169
Zhang J., Chen J., Misch R., Agar D. >DOI: 10.3303/CET1021029
   
Optimisation of Flow Diagram Modifications and Their Interaction for an Efficient Mea Based CO2 Post Combustion Capture. 175
Le Moullec Y., Kanniche M. >DOI: 10.3303/CET1021030
   
Heat Integration of an Oxy-combustion Process for Coal-fired Power Plants with CO2 Capture by Pinch Analysis 181
Fu C., Gundersen T. >DOI: 10.3303/CET1021031
   
CaO-based Sorbents for Capturing CO2 in Clean Energy Processes 187
Wang J., Manovic V., Wu Y., Anthony E. J. >DOI: 10.3303/CET1021032
   
Preliminary Investigation of an Integrated Solar-energy Driven Photobioreactor System for Microalgal Fixation of Carbon Dioxide 193
Den W., Yang S. >DOI: 10.3303/CET1021033
   
Diagnosis of the Air Quality in a Zone Affected by Combustion Gases Sources 199
Alejo Sanchez D., Morales Perez M. C., Alfonso G., Rosa Dominguez E., Herrera I., Nunez V. >DOI: 10.3303/CET1021034
   
Experimental Study of the Carbon Dioxide Solubility in Citric Acid Aqueous Solutions. 205
Mazinani S., Samsaml. A., Jahanmiri A., Sardarian A. >DOI: 10.3303/CET1021035
   
Fluidized Bed Gasification of Coal-oil and Coal-water-oil Slurries by a Gas Containing Carbon Dioxide-oxygen Mixture. 211
Svoboda K, Pohorelý M., JeremiᚠM., Kameníková P., Skoblja1 S., Šyc M. >DOI: 10.3303/CET1021036
   
Shell-side Heat Transfer Enhancement for Shell-and-tube Heat Exchangers by Helical Baffles 217
Wang Q., Zeng M., Chen G., Chen Q., Peng B., Zhang D., Luo L. >DOI: 10.3303/CET1021037
   
The New Corrugation Pattern for Low Pressure Plate Condensers. 223
Tovazhnyanskyy L. L., Kapustenko P., Perevertaylenko O. Y, Arsenyeva O. P., Khavin G. L. >DOI: 10.3303/CET1021038
   
Numerical Studies and Experimental Validation on Combined Parallel Multiple Shell-pass Shell-and-tube Heat Exchangers with Continuous Helical Baffles 229
Chen G., Zeng M., Wang Q., Qi S. >DOI: 10.3303/CET1021039
   
 short Cut Performance Method for Assessing the Flexibility of Cooling Systems. 235
Picon Nunez M., Fuentes-Silva A. L., Vázquez-Ramírez E. E. >DOI: 10.3303/CET1021040
   
Numerical Study on Effect of Flue-gas Inlet Type on Heat and Fluid Flow for Flue-gas-desulfurization Wet Scrubber. 241
Xu J., Liu P., Zeng M., Wang Q. >DOI: 10.3303/CET1021041
   
Pressure Drop Optimization in Multi-stream Heat Exchanger Networks Using Genetic Algorithms. 247
Panjeshahi M. H., Joda F., Tahouni N. >DOI: 10.3303/CET1021042
   
On the Integration of Power, Heat and Water in Industrial Processes 253
Martínez-Patińo J., Picon Nunez M., Hernández Figueroa M. A., Verda V., Serra L. M. >DOI: 10.3303/CET1021043
   
Process Integration for Power-dominated Cryogenic Energy Systems 259
Kim J. K. >DOI: 10.3303/CET1021044
   
A Flexible Structural and Operational Design of Steam Systems 265
Chen C. L., Lin C. Y. >DOI: 10.3303/CET1021045
   
Energy Optimization of a Network of Exchangers-reactors in a Nitric Acid Production Plant 271
Dkhil O., Elhajbelgacem A., Belghaieb J., Hajji N., Labidi J. >DOI: 10.3303/CET1021046
   
Energy Integration of Multiple Effect Evaporators in Sugar Process Production 277
Gonzalez Cortes M., Verelst H., Gonzales E. >DOI: 10.3303/CET1021047
   
A Process Integration Model of a Pulp and Paper Mill Based on Mathematical Programming 283
Ji X., Lundgren J., Wang C., Dahl J., Grip C. E. >DOI: 10.3303/CET1021048
   
Optimisation of Water Networks Using Ranking as Pre-processing Step to Get Equipartition Driving Force 289
Iancu P., Lavric V., Plesu V. >DOI: 10.3303/CET1021049
   
Optimizing the Energy Link Between City and Industry 295
Halasz L., Eder M., Sandor N., Niemetz N., Kettl K. H., Narodoslawsky M. >DOI: 10.3303/CET1021050
   
Targeting for Energy Efficiency and Improved Energy Collaboration Between Different Companies Using Total Site Analysis (tsa) 301
Hackl R., Andersson E., Harvey S. >DOI: 10.3303/CET1021051
   
Energy Saving and Emission Minimization by Means of Semicentralized Integrated Supply and Disposal Systems in Rapidly Growing Urban Regions. 307
Böhm H. R., Schramm S., Zeig C. >DOI: 10.3303/CET1021052
   
Steam Optimization with Increased Flexibility in Steam Power Island Design 313
Botros B. B., Brisson J. G. >DOI: 10.3303/CET1021053
   
Rigorous Optimisation of Refinery Hydrogen Network 319
Jia N., Loughrey M., Zhang N. >DOI: 10.3303/CET1021054
   
Energy Efficiency Improvement in the Interface Between Industry and Its Service Providers: Views from Process Industry, Consulting Firms and Equipment and System Providers 325
Sivill L., Federley J., Hippinen I., Manninen J., Ahtila P. >DOI: 10.3303/CET1021055
   
Direct Conversion Process from Syngas to Light Olefins – a Process Design Study 331
Van den Berg H., Van der Ham A. G. J. >DOI: 10.3303/CET1021056
   
Dehydrogenation of Ethylbenzene Using CO2 – a Process Design Study 337
Van den Berg H., Van der Ham A. G. J. >DOI: 10.3303/CET1021057
   
Addition of Caco3 in the Incineration of Wastewater Sludge at 900ş C. Preparation of Desulfurant Sorbents with the Incinerated Sludge 343
Renedo M. J., Rico J. L., Rico C., Fernández J. >DOI: 10.3303/CET1021058
   
Methods for Industry to Measure and Improve the Energy Efficiency of Utility Systems 349
Hippinen I., Ruohonen P., Sivill L., Federley J., Hakala J., Manninen J., Ahtila P. >DOI: 10.3303/CET1021059
   
Desulfurization Behaviour of Caco3 Added During the Calcination of Wastewater Sludge at 900ş C. Reuse of the Ash After Reactivation 355
Renedo M. J., Fernández J. >DOI: 10.3303/CET1021060
   
Selection of Membrane Contactors Used in a Membrane Distillation Based Micro-separator 361
Adiche C., Sundmacher K. >DOI: 10.3303/CET1021061
   
Exploitation of Low-grade Heat in Site Utility Systems 367
Kapil A., Bulatov I., Kim J. K., Smith R. >DOI: 10.3303/CET1021062
   
Water System Integration by the Process Superstructure Development 373
Matijaševic L., Spoja D., Dejanovic I. >DOI: 10.3303/CET1021063
   
Photovoltaic Solar Electrochemical Oxidation (pseo) for Lignosulphonate Waste Water Treatment 379
Dominguez-Ramos A., Aldaco R., Irabien A. >DOI: 10.3303/CET1021064
   
Integrated Reaction/separation Process for the Production of (s) Ibuprofen Using Supported Liquid Membranes Based on Ionic Liquids 385
Perez de los Rios A., Hernandez Fernandez F. J., Larrosa Guerrero A., Lozano Blanco L. J., Godinez Seoane C. >DOI: 10.3303/CET1021065
   
Smart Energy Storages for Integration of Renewables in 100% Independent Energy Systems 391
Krajacic G., Duic N., Mathiesen B. V., Carvalho M. D. G. >DOI: 10.3303/CET1021066
   
CO2 Reduction Using Microalgae Nanochloropsis Oculata and Production of Oil Algae 397
Purba E., Taharuddin T. >DOI: 10.3303/CET1021067
   
Effective Biomass Integration Into Existing Combustion Plant 403
Touš M., Pavlas M., Stehlik P., Popela P. >DOI: 10.3303/CET1021068
   
Integration Study for Alternative Methanation Technologies for the Production of Synthetic Natural Gas from Gasified Biomass 409
Heyne S., Seemann M., Harvey S. >DOI: 10.3303/CET1021069
   
Improvement of Gas Yield from Biomass Gasification by Using Fe-olivine as Gasifier Bed Inventory 415
Rapagnŕ S., Gallucci K., Di Marcello M., Matt M. >DOI: 10.3303/CET1021070
   
Automated Targeting for the Synthesis of an Integrated Biorefinery with Multiple Products 421
Ng D. K. S. >DOI: 10.3303/CET1021071
   
Flowsheet Development and Modeling of Hydrogen Production from Empty Fruit Bunch via Steam Gasification 427
Inayat A., Ahmad M. N. M., Abdul Mutalib M. I., Yusup S. >DOI: 10.3303/CET1021072
   
Ecological Evaluation of Biogas Feedstock from Intercrops 433
Eder M., Sandor N., Niemetz N., Kettl K. H., Narodoslawsky M. >DOI: 10.3303/CET1021073
   
Increasing Biogas Production from Maize Silage by Ultrasonic Treatment 439
Závacký M., Ditl P., Prell A., Sobotka M. >DOI: 10.3303/CET1021074
   
Acid Pretreatment of Lignocellulosic Biomass: Steady State and Dynamic Analysis 445
Lopez-Arenas T., Rathi P., Ramirez-Menez E., Sales-Cruz M. >DOI: 10.3303/CET1021075
   
Techno-economic Investigations on the Small-scale Production of Ethanol from Egyptian Rice Straw 451
Tewfik S. R., Sorour M. H., Abulnour A. M. G., Talaat H. A., Mitry N. R., Eldefrawy N. M. H., Ahmed S. A. >DOI: 10.3303/CET1021076
   
Experimental Study on Combustion of Liquid Renewable Fuels 457
Kermes V., Belohradský P. >DOI: 10.3303/CET1021077
   
Effect of Temperature on the Performance of Microbial Fuel Cells 463
Larrosa Guerrero A., Scott K., Head I. M., Mateo F., Ginesta Anzola A., Hernandez Fernandez F. J., Godinez Seoane C. >DOI: 10.3303/CET1021078
   
Optimisation of Combustion Process in Biomass-fuelled Cogeneration Plant 469
Strzalka R., Ulbrich R., Eicker U. >DOI: 10.3303/CET1021079
   
Optimization of Parameters Growth Conditions of Yeast Biomass During Single Cell Protein Production by Using Simplex Method 475
Al-Mhanna N. M. M., Hübner H., Buchholz R. >DOI: 10.3303/CET1021080
   
Mathematical Programming Approach to Sustainable System Synthesis. 481
Kravanja Z. >DOI: 10.3303/CET1021081
   
Software Tools Overview: Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction. 487
Lam H. L., Klemeš J., Friedler F., Kravanja Z., Varbanov P. >DOI: 10.3303/CET1021082
   
Integrated Software Application for University Management of Material Resources. 493
Adamescu D., Costoiu M., Corocaescu M., Plesu V., Iancu P., Arsene C., Talpus M. >DOI: 10.3303/CET1021083
   
Optimization Software for Solving Vehicle Assignment Problems to Minimize Costs and Environmental Impacts of Transportation 499
Barany M., Bertok B., Kovacs Z., Friedler F., Fan L. T. >DOI: 10.3303/CET1021084
   
Simultaneous Batching and Scheduling in Multi-product Multi-stage Batch Plants Through Mixed-integer Linear Programming. 505
Kopanos G. M., Puigjaner L. >DOI: 10.3303/CET1021085
   
Solving Scheduling Problems in a Multi-stage Multi-product Batch Pharmaceutical Industry 511
Kopanos G. M., Méndez A., Puigjaner L. >DOI: 10.3303/CET1021086
   
Exploiting C++ Polymorphism for Operational Optimization of Chemical Processes 517
Manenti F., Lima N. M. N., Zuńiga Lińan L., Colombo S. >DOI: 10.3303/CET1021087
   
Model Predictive Control of a Cvd Reactor for Production of Polysilicon Rods 523
Viganň L., Vallerio M., Manenti F., Lima N. M. N., Zuńiga Lińan L., Manenti G. >DOI: 10.3303/CET1021088
   
Towards a Sustainable European Energy System – the Role of the Pulp and Paper Industry 529
Berntsson T., Jönsson J. >DOI: 10.3303/CET1021089
   
Increased Thermal Efficiency in Scandinavian Tmp Mills – Analysing the Potential for Steam Savings Using the Heat Load Model for Pulp and Paper (HLMPP) 535
Jönsson J., Ruohonen P., Berntsson T. >DOI: 10.3303/CET1021090
   
Analysis of an Operating Tmp Mill Using Advanced Composite Curves and Heat Load Model for Pulp and Paper 541
Ruohonen P., Hakala J., Ahtila P. >DOI: 10.3303/CET1021091
   
The Effect of Choice of Utility Systems on Primary Energy Consumption - Case: Press and Drying Sections of a Paper Machine 547
Kontu K., Ruohonen P., Hippinen I., Ahtila P. >DOI: 10.3303/CET1021092
   
Lignocellulosis Biorefinery Processes Energy Integration 553
Alriols M. G., García A., Chouaibi F., Hajji N., Labidi J. >DOI: 10.3303/CET1021093
   
Physical Modelling of the Drained Flow on a Suction Box of a Paper Machine 559
Roux J. C. >DOI: 10.3303/CET1021094
   
Dynamic Modeling and Experimental Validation of a Pem Fuel Cell System 565
Ziogou C., Voutetakis S., Papadopoulou S., Georgiadis M. >DOI: 10.3303/CET1021095
   
He New Hppo Process for Propylene Oxide: from Joint Development to Worldscale Production 571
Bassler P., Weidenbach M., Goebbel H. >DOI: 10.3303/CET1021096
   
Comparison of Structured Packings in CO2 Absorber with Chemical Reactions 577
Chavez R. H., Guadarrama J. D. J. >DOI: 10.3303/CET1021097
   
Abatement of SO2 in a Multi-stage Counter-current Gas-solid Fluidized Bed Reactor. 583
Mohanty C. R., Meikap B. C. >DOI: 10.3303/CET1021098
   
Synthesis of Regional Energy Supply Chain Based on Palm Oil Waste. 589
Lam H. L., Foo D. C. Y., Mustafar K., Klemeš J. >DOI: 10.3303/CET1021099
   
Purification Processes –biodegradation of Vinyl Acetate from Waste Air in a Trickle-bed Bioreactor (tbb). 595
Kasperczyk D., Bartelmu G. >DOI: 10.3303/CET1021100
   
CFD Modelling of CO2 Capture in the Se-smr Process in the Fluidized Bed Reactors. 601
Wang Y., Chao Z., Jakobsen H. >DOI: 10.3303/CET1021101
   
Clean Energy Technology Approaches of Mitigating Greenhouse Gases 607
Katoch S. S., Bhat I. K. >DOI: 10.3303/CET1021102
   
Life Cycle Assessment Analysis of Ethanol Production from Carob Pod. 613
Sanchez Segado S., Lozano L. J., de Juan García D., Godinez Seoane C., de los Ríos A. P., Hernandez Fernandez F. J. >DOI: 10.3303/CET1021103
   
Absorption Cleaning of Flue Gas with Special Focus on SO2 Elimination. 619
Jecha D., Chlapek P., Dvorak R., Bebar L. >DOI: 10.3303/CET1021104
   
Selective Separation of Zn(ii) over Fe(iii) from Acidic Media Using Ionic Liquids as Sole Extraction Agents. 625
Perez de los Rios A., Hernandez Fernandez F. J., Sanchez Segado S., Lozano Blanco L. J., Moreno Sánchez J. I., Godinez Seoane C. >DOI: 10.3303/CET1021105
   
Use of Ionic Liquids as ‘green’ Solvents for Extraction of Zn2+, Cd2+, Fe3+ and Cu2+ from Aqueous Solutions. 631
Hernandez Fernandez F. J., Perez de los Rios A., Ginesta Anzola A., Sanchez Segado S., Lozano Blanco L. J., Moreno Sánchez J. I., Godinez Seoane C. >DOI: 10.3303/CET1021106
   
Natural Gas Oxy-combustion with Flue Gas Recycling for CO2 Capture. 637
Bensakhria A., Leturia M. >DOI: 10.3303/CET1021107
   
CaO-based Sorbents for Capturing CO2 in Clean Energy Processes. 643
Wang J., Monovic V., Eu Y., Anthony E. J. >DOI: 10.3303/CET1021108
   
The Green Brewery Concept - Energy Efficiency and the Use of Renewable Energy Sources in Breweries. 649
Muster-Slawitsch B., Brunner C., Ribeiro de Lima D., Schnitzer H. >DOI: 10.3303/CET1021109
   
A Deliberated Green Process Design in Microstructured Reactors by Accompanying (simplified) Life Cycle Assessmen 655
Huebschmann S., Kralisch D., Loewe H., Breuch D., Dietrich T., Scholz R., Jaehnisch K., Huebner S. >DOI: 10.3303/CET1021110
   
Design Methodology of Absorption Process (use of Mea Absorbent) Based on Self-heat Recuperation Technology 661
Kishimoto A., Kansha Y., Fushimi C., Tsutsumi A. >DOI: 10.3303/CET1021111
   
Properties of Fame from Used Frying Oils 667
Kleinová A.š, Cvengrošová Z., Mikulec J., Cvengroš J. >DOI: 10.3303/CET1021112
   
Lignocellulosic Biorefinery Approach: a Challenge for a New World 673
Toledano A., EgüesI., Andrés A., Llano-Ponte R., Labidi J. >DOI: 10.3303/CET1021113
   
Modelling and Simulation of CO2 Absorption in Alkaline Buffer Solutions in gPROMS 679
Iancu P., Velea S., Plesu V., Muscalu C., David D. >DOI: 10.3303/CET1021114
   
Einstein – Expert System for an Intelligent Supply of Thermal Energy in Industry - Audit Methodology and Software Tool. 685
Brunner C., Muster-Slawitsch B., Heig e., SchweigeR h., Vannoni c. >DOI: 10.3303/CET1021115
   
Beta-Glucan Enriched Products Obtained from Different Barley Milling Fractions. 691
Benito O, Alonso E., Lucas S. >DOI: 10.3303/CET1021116
   
Revamping a Waste Processing Site with Process Synthesis 697
Niemetz N., Kettl K. H., Narodoslawsky M. >DOI: 10.3303/CET1021117
   
Integrated Design Methodology for Wastewater Treatment Plant 703
Fung K. Y., Lee C. M., Ng K. M., Wibowo C. >DOI: 10.3303/CET1021118
   
Case-based Design of Soche (blantyre, Malawi) Wastewater Treatment Plant 709
Chipofya V., Avramenko Y., Kraslawski A. >DOI: 10.3303/CET1021119
   
Determining Optimal Volume Fractions of a Municipal Wastewater Treatment Plant by Dynamic Simulation 715
Somogyi V., Domokos E., Rédey Á. >DOI: 10.3303/CET1021120
   
Equilibrium Studies of Mn(ii), Pb(ii) and Cr(iii) in Bone Char 721
Brum R. F., Marinuchi R., Gomes J. M., Ostroski I. C., Arroyo P. A., Tavares C. R. G., Barros M. A. S. >DOI: 10.3303/CET1021121
   
Sequential Methodology for Simultaneous Batch Process Scheduling and Water Reuse Optimization 727
Halim I., Srinivasan R. >DOI: 10.3303/CET1021122
   
Implementation of Wastes Selective Collection in Small Villages in Cantabria Region (spain): Preliminary Viability Study 733
Margallo M., Aldaco R., Bala A., Gazulla C., Irabien A., Puig R., Fullana P. >DOI: 10.3303/CET1021123
   
Zinc Stripping from Steelwork Dust 739
Wichterle K., Cieslar J., Wichterlová J. >DOI: 10.3303/CET1021124
   
Experimental Determination of Hydrodynamic Dispersion Coefficients for Modelling of Fixed-bed Biosorption 745
Izquierdo M., Gabaldón C., Marzal P. >DOI: 10.3303/CET1021125
   
Energy Recovery of Reject Fraction of Municipal Solid Waste Resulting from the Mechanical-biological Treatment Plants 751
Montejo C., Martín R. Á., Costa C., Ramos P., Márquez M. C. >DOI: 10.3303/CET1021126
   
Utilization of Incineration Waste Ash Residues as Portland Cement Clinker 757
Lam H. K., McKay G. >DOI: 10.3303/CET1021127
   
Rheological Characterization of Recovery Yeast (saccharomyces Cerevisiae) Cream from Brewing Process 763
Cremasco M. A., Melo K. P. >DOI: 10.3303/CET1021128
   
Evaluation of Refuse Derived Fuel (RDF) Utilization in Cement Industry by Using Analytic Network Process (ANP) 769
Özkan A., Banar M. >DOI: 10.3303/CET1021129
   
Improvement of Solid Product Quality in Pyrolysis of Tyre Derived Fuels (TDF) 775
Akyildiz V., Özkan A., Cokaygil Z., Banar M., Baydar S. >DOI: 10.3303/CET1021130
   
Removal of 4-Chlorophenol in the Presence of Methyl Green Using Krcl Excilamp and H2o2: an Approach to the Treatment of Dye Effluents 781
Gomez M., Murcia M. D., Gomez E., Gomez J. L., Christofi N. >DOI: 10.3303/CET1021131
   
Influence of Thermo-chemical Disintegration of Digested Sewage Sludge on Its Dewaterability 787
Elsässer T., Houdková L., Jecha D., Borán J. >DOI: 10.3303/CET1021132
   
Kinetic and Thermodynamic Investigations on Arsenic Adsorption Onto Dolomitic Sorbents 793
Salameh Y., Ahmad M. N. M., Allen S. J., Walker G. >DOI: 10.3303/CET1021133
   
Catalytic Filtration of Flue Gases Polluted by NOX 799
Dvorak R., Chlapek P., Hanak L., Jedlicka F., Stehlik P. >DOI: 10.3303/CET1021134
   
Computer Analysis of Waste Utilization at the Leading Enterprises of Phosphoric Industry of Russia and Kazakhstan 805
Bessarabov A., Klemeš J., Zhekeyev M., Kvasyuk A., Kochetygov A. >DOI: 10.3303/CET1021135
   
Thermophilic Palm Oil Mill Effluent (pome) Treatment Using a Mixed Culture Cultivated from Pome 811
Poh P. E., Chong M. F. >DOI: 10.3303/CET1021136
   
Textile Wastewater Treatment with Coagulation and Gpc Control 817
Pekel L. C., Zeybek Z., Hapoglu H., Alpbaz M. >DOI: 10.3303/CET1021137
   
Generalized Minimum Variance (gmv) Control in Waterborne Wastewater Treatment 823
Camcioglu S., Zeybek Z., Hapoglu H., Alpbaz M., Akpinar A. >DOI: 10.3303/CET1021138
   
Characterisation and Modelling of High Value Natural Compounds Released During the Salting Process of Codfish (Gadus Morhua) 829
Ferraro V., Braga da Cruz I., Ferreria Jorge R., Malcata F. X., Castro P., Pintado M. E. >DOI: 10.3303/CET1021139
   
Energetic Optimization of Wet Air Oxidation: Preliminary Studies on Liquid Vapour Equilibriums and Degradation Kinetics 835
Lefčvre S., Ferrasse J. H., Faucherand R., Viand A., Boutin O. >DOI: 10.3303/CET1021140
   
Energy Efficient Processing of Waste 841
Pavlas M., Touš M., Bebar L. >DOI: 10.3303/CET1021141
   
Modified Deterministic Algorithm for Automated Hen Design in Waste-to-energy Applications 847
Turek V., Jegla Z. >DOI: 10.3303/CET1021142
   
Multi-stage Waste Tyre Pyrolysis: an Optimization Approach 853
Lam K. L., Lee C. W., Hui C. W. >DOI: 10.3303/CET1021143
   
Secondary Combustion Chamber with Inbuilt Heat Transfer Area – Thermal Model for Improved Waste-to-energy Systems Modelling 859
Jegla Z., Bebar L., Pavlas M., Kropac J., Stehlik P. >DOI: 10.3303/CET1021144
   
Upgrading of Tars from Waste Valorisation Processes by Hplc Fractionation: Scale Up from Analytical to Preparative 865
Amutio M., Onaindi A., Lopez G., Artetxe M., Elordi G., Aguado R., Olazar M. >DOI: 10.3303/CET1021145
   
Enhanced Thermal Treatment of Tannery Sewage Sludge 871
Sannino D., Vaiano V., Ciambelli P., Caracciolo D., Naviglio B., Calvanese G. >DOI: 10.3303/CET1021146
   
Multi-objective Optimization of a Pem Fuel Cell System 877
Mert S. O., Ozcelik Z., Ozcelik Y., Dincer I. >DOI: 10.3303/CET1021147
   
Modelling of a Dual Purpose Plant for Waste Incineration 883
Prisciandaro M., Mazziotti di Celso G. >DOI: 10.3303/CET1021148
   
Optimization of a Molten Salt Reactor System for a Destruction of Waste Cationic Ion-exchange Resins 889
Yang H. C., Cho Y. Z., Eun H. C., Lee H. S. >DOI: 10.3303/CET1021149
   
Overview of Industrial Batch Process Scheduling 895
Hegyhati M., Friedler F. >DOI: 10.3303/CET1021150
   
Improving the Maximum Productivity for Ethyl Acetate Synthesis Using Gproms. 901
Edreder E. A., Mujtaba I. M., Emtir M. >DOI: 10.3303/CET1021151
   
Synthesis of Resource Conservation Network for the Clay Bath System in Palm Oil Mills. 907
Chen C. L., Lee J. Y., Ng D. K. S., Foo D. C. Y. >DOI: 10.3303/CET1021152
   
Routing of Railway Systems with the S-graph Framework for Effective Scheduling. 913
Adonyi R., Heckl I., Szalamin A., Olti F. >DOI: 10.3303/CET1021153
   
Optimization of Chemical Batch Processes within a Systematic Retrofit Framework Including Evaluation of Historical Process Data. 919
Bumann A. A., Papadokonstantakis S., Fischer U., Hungerbühler K. >DOI: 10.3303/CET1021154
   
Direct Synthesis of H2O2 from H2 and O2 over Carbon Supported Au, Pd and Au-pd/c Bimetallic Catalysts 925
Gudarzi D., Colehmainen E., Turunen I. >DOI: 10.3303/CET1021155
   
Simulation of the Batch Fermentation Stage in the Process to Obtain Ethanol from Final Molasse 931
Albernas Y, Verelst H., Gonzales E., Pedraza J. >DOI: 10.3303/CET1021156
   
S-graph Based Parallel Algorithm to the Scheduling of Multipurpose Batch Plants. 937
Smidla J., Heckl I., Friedler F. >DOI: 10.3303/CET1021157
   
Droplets Size Distribution Analysis in Suspension Polymerization of Methyl Methacrylate. 943
Isopescu R. D., Postelnicescu P., Dumitrescu A. M., Palau R., Josceanu A. M. >DOI: 10.3303/CET1021158
   
Availability-based Optimization of Preventive Maintenance Schedule: a Parametric Study 949
Dadhich V., Roy S. >DOI: 10.3303/CET1021159
   
Optimal Design of Heat Exchanger Network in Oil Refineries. 955
Al-Mutairi E. M. >DOI: 10.3303/CET1021160
   
Dynamic Optimization of Porous Media Combuster Through Flame Positioning 961
Henriquez L., Bubnovich V., Cubillos F. >DOI: 10.3303/CET1021161
   
Simulation of Furfural Production Process for Revamping with Ethanol Technology from Lignocellulosic Residuals. 967
Morales M., Verelst H., Mesa L., Gonzales E. >DOI: 10.3303/CET1021162
   
Dynamic Simulation and Control Considerations on Gas Sweetening Processes. 973
Fabbri P., Signor S., Grottoli M. G., Manenti F., Cagnacci A., Colombo S. >DOI: 10.3303/CET1021163
   
Dynamic Simulation of Chemical Processes and Operational Scenarios to Support the Forensic Engineer. 979
Manenti F., Adamo D. D., Adamo F. D., Colombo S. >DOI: 10.3303/CET1021164
   
Development of High Efficiency Enhanced Tubes 985
Kukulka D. J., Fuller K. G. >DOI: 10.3303/CET1021165
   
Thermocline Movement Dynamics and Thermocline Growth in Stratified Tanks for Heat Storage 991
Walmsley M. R. W., Atkins M. J., Linder J., Neale J. R. >DOI: 10.3303/CET1021166
   
Integration Potential of Milk Powder Plants Using Conventional Heat Recovery Options 997
Atkins M. J., Walmsley M. R. W., Neale J. R. >DOI: 10.3303/CET1021167
   
Dawsonite Production with Caterpillar Microreactor 1003
Dubert D. C., Garcia-Valls R., Pérez-Ramírez J. >DOI: 10.3303/CET1021168
   
A Methodological Approach to High Precision Measurement of Dynamic Torque of Engine 1009
Dongqing Z., Tiexiong S. >DOI: 10.3303/CET1021169
   
Implementation of the Dynamic Modeling for Development of Chemical Processes 1015
Ríos Hidalgo L. M., Santos Herrero R., Guerra Valdez B. F., Peralta Suárez L. M., Goya F. A., Esperanza Pérez G. >DOI: 10.3303/CET1021170
   
Modeling of the Extent of Reaction Curve for the Transesterification Process Between 2-methylpropan-1-ol and Methyl Ethanoate 1021
Calvet-Tarragona A., Bonet J., Bonet-Ruiz A. E., Costa Lopez J. >DOI: 10.3303/CET1021171
   
Application of Nanofiltration/reverse Osmosis Membranes to Textile Effluents Aiming Its Reclamation and Reuse: Influence of Operating Conditions 1027
Barredo-Damas S., Alcaina-Miranda M. I., Iborra-Clar M. I., Mendoza-Roca J. A. >DOI: 10.3303/CET1021172
   
Phi-sulfo Fatty Methyl Ester Sulfonates (phi-mes). a Novel Anionic Surfactant 1033
Cohen L., Roberts D. W., Pratesi C. >DOI: 10.3303/CET1021173
   
Submerged Membrane Bioreactor for Wastewater Treatment. Optimal Operating Strategy 1039
Buzatu P., Lavric V. >DOI: 10.3303/CET1021174
   
A Method for the Regeneration of Used Fe-zsm5 Catalyst in Fischer–tropsch Synthesis 1045
Zamini Y., Yousefian S. H., Nakhaei Pour A., Moshtari B., Bahadoran F., Taheri S. A. >DOI: 10.3303/CET1021175
   
The Influence of New Tools in Virtual Learning Environments on the Teaching and Learning Process in Chemical Engineering 1051
Perry S., Bulatov I. >DOI: 10.3303/CET1021176
   
E-learning Today. 1057
Josceanu A. M., Dumitrescu A. M., Danciu T. D., Isopescu R. D., Postelnicescu P., Plesu V., Stefan C. >DOI: 10.3303/CET1021177
   
New Developments for Electronic Document Management in University. 1063
Isopescu R. D., Dinu G., Iancu P., Bercaru M. T., Arsene I. >DOI: 10.3303/CET1021178
   
Integrated Software Application for University Research Management. 1069
Costoiu M., Adamescu D., Svasta M., Nicola S., Plesu V., Iancu P., Alesincu H., Tapu A., Talpus M. >DOI: 10.3303/CET1021179
   
Dbe for Smes: Towards a European Approach of Regional Development in Romania and Portugal. 1075
Damsa F., Ceclan M., Ceclan R. E., Popa I., Dulgheru A. S., Lopes D., Gray E., Van Ekelenburg H., Kocin R., Terceiro P. >DOI: 10.3303/CET1021180
   
CFD Analysis of Multi-phase Turbulent Flow in a Solar Reactor for Emission-free Generation of Hydrogen 1081
Ozalp N., Devanuri J. >DOI: 10.3303/CET1021181
   
CFD Analysis of Injection of Heavy Fuel Oil and Plastic Particles Into a Blast Furnace Raceway – Estimation of Droplet Size Distribution 1087
Jordan C., Harasek M., Zauner F., Kirchbacher F., Feilmayr C., Schuster S. >DOI: 10.3303/CET1021182
   
Process-simulation and Computational Fluid Dynamics for the Development of a Novel Solid Biomass-fired Combustion Chamber 1093
Kuttner C., Miltner M., Harasek M. >DOI: 10.3303/CET1021183
   
CFD Analysis of Hydrodynamic and Thermal Behaviour of Advanced-flow(tm) Reactors 1099
Chivilikhin M. S., Soboleva V., Kuandykov L., Woehl P., Lavric E. D. >DOI: 10.3303/CET1021184
   
Mathematical Modelling of Biomass Combustion: Packing Conditions Issues 1105
Jurena T., Hájek J. >DOI: 10.3303/CET1021185
   
Wall Heat Fluxes in Swirling Combustion of Extra-light Fuel-oil in Large-scale Test Combustor: Experiment and Modeling Using Eddy Dissipation Model 1111
Broukal J., Hájek J. >DOI: 10.3303/CET1021186
   
CFD Simulations of Compartment Fires 1117
Matheislová H., Jahoda M., Kundrata T., Dvorák O. >DOI: 10.3303/CET1021187
   
Local Wall Heat Fluxes in Swirling Non-premixed Natural Gas Flames in Largescale Combustor: Data for Validation of Combustion Codes 1123
Vondál J., Hájek J., Kermes V. >DOI: 10.3303/CET1021188
   
Analysis of Nozzle Damage on Hydrocrack Unit During Media Mixing 1129
Nekvasil R. >DOI: 10.3303/CET1021189
   
Biofuel Supply Chains: Impacts, Indicators and Sustainability Metrics 1135
Smith R. L. >DOI: 10.3303/CET1021190
   
Ethanol from Lignocellulosic Biomass – Evaluation of Process Scenarios for Austria 1141
Kravanja P., Friedl A. >DOI: 10.3303/CET1021191
   
Preliminary Design and Energy Efficiency Analysis of a Kraft Pulp Mill Converted to a Biorefinery Producing Ethanol and Dme from Softwood. 1147
Fornell R., Pettersson K., Berntsson T. >DOI: 10.3303/CET1021192
   
Effects of Feedstocks on the Process Integration of Biohydrogen Production. 1153
Foglia D., Ljungren M., Wukovits W., Friedl A., Zacchi G., Urbaniec K., Markowski M. >DOI: 10.3303/CET1021193
   
Life Cycle Analysis of Hydrogen Production from Biomass Fermentation 1159
Ochs D., Ahrer W. >DOI: 10.3303/CET1021194
   
An Integrated Biorefinery Framework for the Co-production of Biofuels and Chemicals: Experimental Analysis, Detailed Modelling, Optimisation and Life Cycle Analysis 1165
Vlysidis A., Binns M., Webb C., Theodoropoulos C. >DOI: 10.3303/CET1021195
   
Sustainability Assessment of Biodiesel Production by Monetary Indicators 1171
Lee C. W., Lam K. L., Hui C. W. >DOI: 10.3303/CET1021196
   
Life Cycle Assessment of third Generation Biofuels Production Based on “ Cradle to Cradle” Methodology 1177
Pardo Y., Kafarov V., Acevedo P. >DOI: 10.3303/CET1021197
   
Preliminary Conceptual Design of Biobutanol Production Process from Glycerin and Lignocellulosic Biomass 1183
Sánchez O. J., Gutiérrez L. F. >DOI: 10.3303/CET1021198
   
Synthesis of Networks for the Production and Supply of Renewable Energy from Biomass 1189
Cucek L., Lam H. L., Klemeš J., Varbanov P., Kravanja Z. >DOI: 10.3303/CET1021199
   
Development of Agitation Systems in Biogas Plants: Investigation of Mixing Characteristics, Improvement of Energy Efficiency and Scale-up Using Computational Fluid Dynamics. 1195
Maier C., Weichselbaum W., Schlerka M., Harasek M. >DOI: 10.3303/CET1021200
   
Optimization of third Generation Biofuels Production: Biodiesel from Microalgae Oil by Homogeneous Transesterification 1201
Plata V., Kafarov V., Moreno N. >DOI: 10.3303/CET1021201
   
Biomass Gasification Integrated with a Pulp and Paper Mill – the Need for Economic Policies Promoting Biofuels. 1207
Wetterlund E., Karlsson M., Harvey S. >DOI: 10.3303/CET1021202
   
Investigation of the Long-term Performance of an Industrial-scale Biogas Upgrading Plant with Grid Supply Applying Gas Permeation Membranes. 1213
Miltner M., Makaruk A., Harasek M. >DOI: 10.3303/CET1021203
   
Producing Diesel Fuel by Co-hydrogenation of Vegetable Oil with Gas Oil. 1219
Tóth C., Baladincz P., Kovács S., Hancsók J. >DOI: 10.3303/CET1021204
   
Production of Bio Gas Oil from Bioparaffins over Pt/sapo-11 1225
Kasza |T., Holló A., Thernesz A., Hancsók J. >DOI: 10.3303/CET1021205
   
Production of Biodiesel from Palm Oil by Extractive Reaction. 1231
Gutiérrez L. F., Sánchez O. J., Cardona C. A. >DOI: 10.3303/CET1021206
   
Control Strategies for a Biodiesel Process by Reactive Absorption 1237
Bildea C. S., Kiss A. A. >DOI: 10.3303/CET1021207
   
Biogasoline and High Alcohols Production by One Step Ethanol Conversion on Densified Mgo Catalyst with Enhanced Concentration of Surface Active Sites. 1243
Hemo E., Virduk R., Landau M. V., Herskowitz M. >DOI: 10.3303/CET1021208
   
Energy from Bio Resources 1249
Knez Hrncic M., Škerget M., Ilic L., Knez Ž.  >DOI: 10.3303/CET1021209
   
Fuel Ethanol Production from Carob Pod 1255
Sanchez Segado S., de Juan García D., Lozano L. J., Godinez Seoane C., de los Ríos A. P., Hernandez Fernandez F. J. >DOI: 10.3303/CET1021210
   
Kombigas: Combined Methane and Hydrogen Production for the Application in the Stationary Motor. 1261
Ochs D., Kastner V., Ahrer W. >DOI: 10.3303/CET1021211
   
Process Design of Biodiesel Production from Rapeseed Oil. 1267
Elad E., Bildea C. S., Plesu V., Marton G., Bozga G. >DOI: 10.3303/CET1021212
   
Chemical Oxidation with Ozone as Pre-treatment of Lignocellulosic Materials for Bioethanol Production. 1273
Garcia-Cubero M. T., Marcos M., Coca M., Bolado S., Gonzalez-Benito G. >DOI: 10.3303/CET1021213
   
Microalgae Chlorella Sp. as an Alternative Source of Fermentable Sugars 1279
Maršálková B., Širmerová M., Kurec M., Brányik T., Brányiková I., Melzoch K., Zachleder V. >DOI: 10.3303/CET1021214
   
Optimization of the Operating Conditions in Enzymatic Hydrolysis of Pretreated Lignocellulosic Materials. 1285
Garcia-Cubero M. T., Bolado S., Coca M., Gonzalez-Benito G. >DOI: 10.3303/CET1021215
   
The Effect of Bioalcohols on the Water Solubility in Reformulated Gasolines. 1291
Neagu (Petre) M., Rosca P., Dragomir R. E., Mihai O. >DOI: 10.3303/CET1021216
   
Design of a Multifunctional Reactor for third Generation Biofuels Production 1297
Gonzalez A. D., Kafarov V. >DOI: 10.3303/CET1021217
   
Model Development of a Membrane Gas Permeation Unit for the Separation of Hydrogen and Carbon Dioxide. 1303
Rodrigues D., Foglia D., Wukovits W., Friedl A. >DOI: 10.3303/CET1021218
   
Life Cycle Assessment for Joint Production of Biodiesel and Bioethanol from African Palm 1309
Martinez D., Kafarov V., Acevedo P. >DOI: 10.3303/CET1021219
   
Catalytic Conversion of Fischer-Tropsch Waxes 1315
Pölczmann G., Szegedi A., Valyon J., Hancsók J. >DOI: 10.3303/CET1021220
   
Catalytic Hydrotreating of Triglycerides for the Production of Bioparaffin Mixture 1321
Kovács S., Boda L., Leveles L., Thernesz A., Hancsók J. >DOI: 10.3303/CET1021221
   
Improvement of Bioethanol Production from Corn by Ultrasound and Microwave Pretreatments. 1327
Nikolic S., Mojovic L., Rakin M., Vukašinovic M., Pejin D., Pejin J. >DOI: 10.3303/CET1021222
   
Production of Bioethanol by Simultaneous Saccharification and Fermentation of Corn Meal by Immobilized Yeast 1333
Mojovic L., Rakin M., Vukašinovic M., Nikolic S., Pejin J., Pejin D. >DOI: 10.3303/CET1021223
   
Polyols from the Lignocellulosic Waste of Biodiesel Production Process. 1339
Serrano L., Briones R., Melus A., Herseczk Z., Labidi J. >DOI: 10.3303/CET1021224
   
Exergy Analysis of Palm Oil Biodiesel Production. 1345
Jaimes W., Acevedo P., Kafarov V. >DOI: 10.3303/CET1021225
   
A Quantum Mechanics Approach to Biofuel Synthesis. 1351
Marton G., Plesu V., Marton A., Bercaru M. T. >DOI: 10.3303/CET1021226
   
Simulation of a Continuous Process for Biodiesel Synthesis from Triacylglycerol Based on Reactive Distillation 1357
Bonet J., Bonet-Ruiz A. E., Lorens Llacuna J., Plesu V., Bercaru M. T., Bozga R. E. >DOI: 10.3303/CET1021227
   
Exergy Analysis for third Generation Biofuel Production from Microalgae Biomass 1363
Peralta Y. Y., Kafarov V., Sanchez E. >DOI: 10.3303/CET1021228
   
Process Integration – Successful Implementation and Possible Pitfalls 1369
Klemeš J., Varbanov P. >DOI: 10.3303/CET1021229
   
Possibility to Combine Exergy with Other Process Integration Methods for a Steelmaking Case 1375
Elfgren E., Grip C. E., Wang C., Karlsson J. >DOI: 10.3303/CET1021230
   
Work Flow in Process Development for Energy Efficient Processes 1381
Asprion N., Rumpf B., Gritsch A. >DOI: 10.3303/CET1021231
   
Pns Solutions: a P-graph-based Programming Framework for Process-network Synthesis 1387
Heckl I., Varga V., Friedler F., Fan L. T. >DOI: 10.3303/CET1021232
   
Optimal Design and Operation of a Gas-to-liquid Process 1393
Rafiee A., Hillestad M. >DOI: 10.3303/CET1021233
   
Oxidative Coupling of Methane: a Design of Integrated Catalytic Processes. 1399
Wozny G., Arellano-Garcia H. >DOI: 10.3303/CET1021234
   
A Non-dimensional Simplified Cost Function for Distillation Systems Evaluation. 1405
Bonet J., Bonet-Ruiz A. E., Radu C. V., Llorens Llacuna J., Costa Lopez J. >DOI: 10.3303/CET1021235
   
Synthesis of an Integrated Biorefinery via the C-h-o Ternary Diagram. 1411
Tay D. H. S., Kheireddin H., Ng D. K. S., El-Halwagi M. M. >DOI: 10.3303/CET1021236
   
Number of Transfer Units Information on Residue Curve Maps. 1417
Bonet-Ruiz A. E., Bonet J., Bozga G., Llorens Llacuna J., Plesu V. >DOI: 10.3303/CET1021237
   
Soft Sensor for Diesel Fuel Distillation End Point Estimation. 1423
Mohler I., Hölbling N., Galinec G., Bolf N. >DOI: 10.3303/CET1021238
   
Controller Tuning of District Heating Networks Using Experiment Design Techniques. 1429
Dobos L., Abonyi J. >DOI: 10.3303/CET1021239
   
The Effect of Economic Objective Function on Economic, Operational and Environmental Performance of Optimal Chemical Processes 1435
Kasaš M., Kravanja Z., Novak Pintaric Z. >DOI: 10.3303/CET1021240
   
Computer-aided Analysis of Industrial Energy Systems Applied to a Paper Machine 1441
Kirschbaum S., Voll P., Wrobel G. >DOI: 10.3303/CET1021241
   
Production of Extracellular Protease and Determination of Optimize Condition by Bacillus Licheniformis Bbrc 100053 1447
Ghobadi Nejad Z., Yaghmaei S., Haji Hosseini R. >DOI: 10.3303/CET1021242
   
Process Simulation for Improve Energy Efficiency, Maximize Asset Utilization and Increase in Feed Flexibility in a Crude Oil Refinery 1453
Varga Z., Rabi I., Kubovics Stocz K. >DOI: 10.3303/CET1021243
   
The Steady-state Simulations for the Gas Flow in a Pipeline Network. 1459
Szoplik J. >DOI: 10.3303/CET1021244
   
Observation of Crabtree Effect and Diauxic Behaviour of Yeast Using Absoption 1465
Al-Mhanna N. M. M. >DOI: 10.3303/CET1021245
   
Design of Municipal Solid Waste Incinerator Based on Hierarchical Methodology 1471
Alonso-Torres B., Rodrigez-Martinez A., Domínguez-Patino M. L. >DOI: 10.3303/CET1021246
   
Enhancement of Gasoline Production in a Novel Optimized Hydrogen-permselective Membrane Fischer-Tropsch Reactor in Gtl Technology 1477
Bayat M., Rahmani F., Mazinani S., Rahimpour M.R. >DOI: 10.3303/CET1021247
   
Comparison of Differen Methods in Bioleaching of Tungsten-rich Spent Hydro-cracking Catalyst Using Adapted Penecillum Simplicissium BBRC-20019 1483
Amiri F., Yaghmaei S., Mousavi S.M. >DOI: 10.3303/CET1021248
   
Demineralizaion and Desulfurization Process to Generate Clean Coal 1489
Vaccaro S. >DOI: 10.3303/CET1021249