CHEMICAL
ENGINEERING TRANSACTIONS
-
VOL.25
Editors: Jirí J. Klemeš, Hon Loong Lam, Petar S.
Varbanov
Copyright © 2011, AIDIC Servizi S.r.l.,
ISBN 978-88-95608-16-7;
ISSN 1974-9791
|
Table of Contents
& Authors Index
|
DOI
|
| VOL I | |
| CO2 MINIMISATION AND MITIGATION | |
| Valorization of CO2 Emissions Into Ethanol by an Innovative Process | 1 |
| Abidin V., Bouallou C., Clodic D. | DOI:10.3303/CET1125001 |
| Process Simulation of CO2 Chemical Absorption Based on Self-heat Recuperation Technology for Pre-combustion Process | 7 |
| Kishimoto A., Kansha Y., Fushimi C., Tsutsumi A. | DOI:10.3303/CET1125002 |
| Optimisation of the Cost / Power Trade-offs Associated with Solvent Absorption Carbon-capture Plants | 13 |
| Harkin T., Hoadley A., Hooper B. | DOI:10.3303/CET1125003 |
| Adaptive Random Search Method + Genetic Algorithms for Reaction Kinetics Modeling: CO2 Absorption Systems | 19 |
| Toro-Molina C., Rivera-Tinoco R., Bouallou C. | DOI:10.3303/CET1125004 |
| Integration of Oxygen Transport Membranes in an Igcc Power Plant with CO2 Capture | 25 |
| Anantharaman R., Bolland O. | DOI:10.3303/CET1125005 |
| Municipal Solid Waste as Alternative Fuel – Minimising Emissions and Effluents | 31 |
| Fodor Z., Klemes J.J. | DOI:10.3303/CET1125006 |
| Study on External Costs of Flare Gases Using Asian Development Bank Method | 39 |
| Younessi Sinaki S., Tarighaleslami A.H., Jafarigol F. | DOI:10.3303/CET1125007 |
| Thermo Physical Analysis of 2-amino-2-methyl-1-propanol Solvent for Carbon Dioxide Removal | 45 |
| Murshid G., Shariff A.M., Keong L.K., Bustam A.M. | DOI:10.3303/CET1125008 |
| Absorption of Carbon Dioxide Into Aqueous Solutions of Alkanolamines in a Wetted Wall Column with Film Promoter | 51 |
| Rodriguez H., Mello L., Salvagnini W., Paiva J. | DOI:10.3303/CET1125009 |
| The Potential of Ghg Emissions Reduction in Macedonia by Renewable Electricity | 57 |
| Cosic B., Markovska N., Taseska V., Krajacic G., Duic N. | DOI:10.3303/CET1125010 |
| Carbon Dioxide Reforming of Methane on ??-ni Catalysts | 63 |
| Aldashukurova G., Mironenko A., Mansurov Z., Shikina N., Yashnik S., Ismagilov Z. | DOI:10.3303/CET1125011 |
| Optimized Process from Post-combustion CO2 Capture in Thermoelectric Power Plant, Using Structured Packing | 69 |
| Chavez R.H., Guadarrama J.J. | DOI:10.3303/CET1125012 |
| ENERGY SAVING TECHNOLOGY | |
| Reliability Issues in the Design and Optimization of Process Utility Systems | 75 |
| Smith R., Yin Q., Lin Z., Zheng X. | DOI:10.3303/CET1125013 |
| Energy Saving for Ethylene Process by Advanced Process Integration | 81 |
| Hirata K. | DOI:10.3303/CET1125014 |
| Analysis of Oxygen Enrichment and Its Potential Influences on the Energy System in an Integrated Steel Plant Using a New Solution Space Based Optimization Approach | 87 |
| Wang C., Sandberg J., Larsson M. | DOI:10.3303/CET1125015 |
| Application of the Self-heat Recuperation Technology to Crude Oil Distillation | 93 |
| Kansha Y., Kishimoto A., Tsutsumi A. | DOI:10.3303/CET1125016 |
| Comparison of Robust and Optimal Approach to Stabilization of Cstrs | 99 |
| Bakosova M., Meszaros A., Klemes J.J., Oravec J. | DOI:10.3303/CET1125017 |
| Retrofit with Exchanger Relocation of Crude Preheating Train for Crude Distillation Unit | 105 |
| Somjitt T., Siemanond K., Junlobol K., Susangiem | DOI:10.3303/CET1125018 |
| Optimizing Energy Efficiency in Low Temperature Drying by Zeolite Adsorption and Process Integration | 111 |
| Atuonwu J., Van Straten G., Van Deventer H., Van Boxtel A. | DOI:10.3303/CET1125019 |
| An Exergy Analysis on Crude Oil Atmospheric Distillation Column | 117 |
| Tarighaleslami A.H., Omidkhah Nasrin M.R., Younessi Sinaki S. | DOI:10.3303/CET1125020 |
| Integration of Low Grade Heat with District Heating | 123 |
| Kapil A., Bulatov I., Smith R., Kim J.K. | DOI:10.3303/CET1125021 |
| Comparison of Double Stage Heat Transformer with Double Absorption Heat Transformer Operating with Carrol – Water for Industrial Waste Heat Recovery | 129 |
| Romero R.J., Rodriguez-Martinez A., Cerezo J., Rivera W. | DOI:10.3303/CET1125022 |
| Optimization in Energy Usage for Refrigeration Systems Using Combined Pinch and Exergy Analysis | 135 |
| Raei B. | DOI:10.3303/CET1125023 |
| Modeling of Thermoelectric Power Generation by Porous Media Combustion Burner | 141 |
| Bubnovich V., Maiza M., Henriqez L. | DOI:10.3303/CET1125024 |
| Computational Approach for Energy Intensity Reduction of Professional Laundry Care Process | 147 |
| Bobak P., Galcakova A., Pavlas M., Ksenzuliak V. | DOI:10.3303/CET1125025 |
| Heat Integration Improvement for Benzene Hydrocarbons Extraction from Coke-oven Gas | 153 |
| Tovazhnyansky L., Kapustenko P., Ulyev L., Boldyryev S. | DOI:10.3303/CET1125026 |
| Research on Foam Gypsum with Hemp Fibrous Reinforcement | 159 |
| Brencis R., Skujans J., Iljins U., Ziemelis I., Ositis N. | DOI:10.3303/CET1125027 |
| Intelligent Control of Heat Exchangers | 165 |
| Vasickaninova A., Bakosova M. | DOI:10.3303/CET1125028 |
| Theoretically Study on the Reaction Complexing Olefins with Nickel Dithiolene | 171 |
| Han Q.Z., Zhang H.Z., Zhao Y.H., Wen H. | DOI:10.3303/CET1125029 |
| Simultaneous Energy and Water Minimization Applied to Sugar Process Production | 177 |
| Gonzalez Cortes M., Verelst H., Gonzalez Suarez E. | DOI:10.3303/CET1125030 |
| INDUSTRIAL APPLICATION & OPTIMAL DESIGN | |
| Application of Heat Recovery Loops for Improved Process Integration Between Individual Plants at a Large Dairy Factory | 183 |
| Atkins M., Walmsley M., Neale J. | DOI:10.3303/CET1125031 |
| Automated Targeting for Synthesis of an Syngas-based Integrated Biorefinery | 189 |
| Tay D.H.S., Ng D.K.S. | DOI:10.3303/CET1125032 |
| Heat Pump Integration in a Cheese Factory | 195 |
| Becker H., Vuillermoz A., Marechal F. | DOI:10.3303/CET1125033 |
| Risk-based Inspection and Its Application to the Optimization of Chemical Plants | 201 |
| Medina H., Arnaldos J., Casal J. | DOI:10.3303/CET1125034 |
| Simulation and Multi-objective Optimization of Bioprocesses with Matlab and Superpro Designer Using a Client-server Interface | 207 |
| Taras S., Woinaroschy A. | DOI:10.3303/CET1125035 |
| Heat Integration of a Continuous Reforming Process | 213 |
| Liang C., Feng X. | DOI:10.3303/CET1125036 |
| Identification of the Formed Complex During Extraction of Copper (ii) from Sulphuric Acid by Means of Sodium Diethyldithiocarbamate (sddt) | 219 |
| Touati S., Meniai A.H. | DOI:10.3303/CET1125037 |
| One-stage Optimization Problem with Chance Constraints | 225 |
| Ostrovsky G., Zyatdinov N., Lapteva T. | DOI:10.3303/CET1125038 |
| Continuous Synthesis of Porous Ammonium Dawsonite within a New Microstructrured System | 231 |
| Dubert D.C., Perez-Ramirez J., Garcia-Valls R. | DOI:10.3303/CET1125039 |
| Alternative Approach to Modelling of Fluid Distribution in a Parallel Flow System | 237 |
| Turek V., Jegla Z., Stehlik P. | DOI:10.3303/CET1125040 |
| Comparison of Different Methods for Pressure Drop Calculation in 90° and 180° Elbows | 243 |
| Kilkovsky B., Jegla Z., Stehlik P. | DOI:10.3303/CET1125041 |
| Optimisation of Emulsion Co-polymerization of Styrene and Mma in Semi-batch Reactor | 249 |
| Wan Ibrahim W.H., Mujtaba I., Alhamad B. | DOI:10.3303/CET1125042 |
| Analysis of Thermal Runaway Scenarios in a Chemical Reactor | 255 |
| Benamrane B., Bourmada N., Chetouani Y. | DOI:10.3303/CET1125043 |
| New Algorithm for the Determination of Product Sequences of Batch Azeotropic and Pressure Swing Distillation | 261 |
| Hegely L., Lang P. | DOI:10.3303/CET1125044 |
| Submerged Membrane Bioreactors for Wastewater Treatment. Multi-objective Optimization | 267 |
| Buzatu P., Lavric V. | DOI:10.3303/CET1125045 |
| Optimization of Batch Distillation Involving Hydrolysis System | 273 |
| Edreder E.A., Mujtaba I., Emtir M. | DOI:10.3303/CET1125046 |
| WASTE MINIMISATION, PROCESSING AND MANAGEMENT | |
| Minimization of Resource Requirement and Inter-plant Cross Flow Across Resource Allocation Networks | 279 |
| Sahu G.C., Bandyopadhyay S. | DOI:10.3303/CET1125047 |
| Polyphenols and Energy Recovery from Spent Coffee Grounds | 285 |
| Zuorro A., Lavecchia R. | DOI:10.3303/CET1125048 |
| Environmental Performance Assessment in Transportation and Warehousing Operations by Means of Categorial Indicators and Multicriterial Preference | 291 |
| Sellitto M., Borchardt M., Pereira G., Gomes L. | DOI:10.3303/CET1125049 |
| Energy Savings and Environmental Benefits of Fly Ash Utilization as Partial Cement Replacement in the Process of Pavement Building | 297 |
| Ondova M., Stevulova N., Zelenakova E. | DOI:10.3303/CET1125050 |
| Removal of Chromium from Wastewater Using Macrophytes Lemna Minor as Biosorbent | 303 |
| Lima L.K.S., Kleinubing S.J., Da Silva E.A., Da Silva M.G.C. | DOI:10.3303/CET1125051 |
| Growth Rate Kinetics for Struvite Crystallization | 309 |
| Harrison M., Johns M., White E., Mehta C. | DOI:10.3303/CET1125052 |
| Evaluation of the Hydrodynamic Performance of an Electrochemical Reactor with Rotating Ring Electrodes Using CFD Analysis | 315 |
| Martinez-Delgadillo S., Mollinedo-Ponce H., Mendoza-Escamilla V., Huerta O. | DOI:10.3303/CET1125053 |
| Efficiency Increase of Secondary Denox Systems for Cleaning of Flue Gas Produced in Combustion Processes | 321 |
| Dvorak R., Smejkal Q., Hanak L., Jedlicka F., Stehlik P. | DOI:10.3303/CET1125054 |
| Absorption Flue Gas Cleaning – “spheric O-element” New Prototype of first Stage and HCL Reduction | 327 |
| Jecha D., Dvorak R., Bebar L., Stehlik P. | DOI:10.3303/CET1125055 |
| Reduction of NOX at New Mobile Experimental Unit Using Catalytic Filtration | 333 |
| Hanak L., Jedlicka F., Dvorak R., Jecha D., Stehlik P. | DOI:10.3303/CET1125056 |
| Utilisation of Sorbents for Heavy Metals Removal from Acid Mine Drainage | 339 |
| Petrilakova A., Balintova M. | DOI:10.3303/CET1125057 |
| Study of Ph Influence on the Selective Precipitation of Heavy Metals from Acid Mine Drainage | 345 |
| Balintova M., Petrilakova A. | DOI:10.3303/CET1125058 |
| HEAT EXCHANGERS AS EQUIPMENT AND INTEGRATED ITEMS | |
| Study on Reliability of High Temperature Heat Exchangers | 351 |
| Ma T., Du L., Zhang D., Ji Y., Zeng M., Wang Q. | DOI:10.3303/CET1125059 |
| The Heat and Momentum Transfers Relation in Channels of Plate Heat Exchangers | 357 |
| Kapustenko P., Arsenyeva O., Dolgonosova O. | DOI:10.3303/CET1125060 |
| Design of Coolers for Use in an Existing Cooling Water Network | 363 |
| Picon-Nunez M., Polley G.T., Canizalez-Davalos L. | DOI:10.3303/CET1125061 |
| Experimental Study on Heat Transfer and Resistance Performance of Elliptical Finned Tube Heat Exchanger with Different Air Entrance Angles | 369 |
| Du X., Zeng M., Wang Q., Dong Z. | DOI:10.3303/CET1125062 |
| Improving Energy Recovery in Heat Exchanger Network with Intensified Tube-side Heat Transfer | 375 |
| Pan M., Bulatov I., Smith R., Kim J.K. | DOI:10.3303/CET1125063 |
| Importance of Understanding Variable and Transient Energy Demand in Large Multi-product Industrial Plants for Process Integration | 381 |
| Walmsley M., Atkins M., Morrison A., Neale J. | DOI:10.3303/CET1125064 |
| Process Synthesis with Heat Integration of Decarbonised Coal Energy Systems | 387 |
| Ng K.S., Zhang N., Sadhukhan J. | DOI:10.3303/CET1125065 |
| Error Propagation on a Hybrid Evaporator Model | 393 |
| Colorado D., Ding X., Hernandez J.A., Andaverde J., Juarez D. | DOI:10.3303/CET1125066 |
| The Generalized Correlation for Friction Factor in Criss-cross Flow Channels of Plate Heat Exchangers | 399 |
| Arsenyeva O., Tovazhnyansky L., Kapustenko P., Khavin G. | DOI:10.3303/CET1125067 |
| Entropy Minimization in Design of Extractive Distillation System with Internal Heat Exchangers | 405 |
| Mendoza D.F., Riascos C.A.M. | DOI:10.3303/CET1125068 |
| DYNAMIC OPERATION AND PULP & PAPER | |
| Scandinavian Hardwood Biorefinery Using “near-neutral” Hemicelluloses Pre-extraction- Energy Efficiency Measures | 411 |
| Mora V., Mahmoudkhani M., Berntsson T. | DOI:10.3303/CET1125069 |
| Optimisation of the Energy Consumption in the Pulp Refining Operation | 417 |
| Roux J.C., Bloch J.F., Nortier P. | DOI:10.3303/CET1125070 |
| Facing New Products Demand Through Simultaneous Structural and Operational Decisions in the Design of the Control Recipe | 423 |
| Moreno-Benito M., Espuna A. | DOI:10.3303/CET1125071 |
| Integration of Supercritical Water Gasification (scwg) in Pulp and Paper Production – a Feasibility Study of Integration Options | 429 |
| Myreen L., Ronnlund I., Westerlund T. | DOI:10.3303/CET1125072 |
| System Analysis and Design of Flexible Plant of Ultra Pure Materials | 435 |
| Bessarabov A., Bulatov I., Kvasyuk A., Kochetygov A. | DOI:10.3303/CET1125073 |
| Simultaneous Water and Energy Optimisation for a Pulp and Paper Mill | 441 |
| Chew I.M.L., Foo D.C.Y., Lam H.L., Bonhivers J.C., Stuart P., Savulescu L.E., Alva-Argaez A. | DOI:10.3303/CET1125074 |
| An Experimental Parametric and Kinetics Study of Cu (ii) Retention by Orange Peels as Adsorbent | 447 |
| Khalfaoui A., Meniai A.H., Ouacil S. | DOI:10.3303/CET1125075 |
| OPERATIONAL RESEARCH, SUPPLY CHAIN MANAGEMENT AND E-LEARNING | |
| Optimal Design of Supply Chains by P-graph Framework Under Uncertainties | 453 |
| Sule Z., Bertok B., Friedler F., Fan L.T. | DOI:10.3303/CET1125076 |
| A Methodology for Quantitative Comparison of Control Solutions with Respect to Costs, Quality and External Conditions | 459 |
| Macek K., Marik K. | DOI:10.3303/CET1125077 |
| E -teaching Today | 465 |
| Josceanu A.M., Dumitrescu A.M., Isopescu R., Danciu T., Postelnicescu P., Plesu V. | DOI:10.3303/CET1125078 |
| Improving Learners Engagement with Use of Hybrid Approaches in Engineering Education | 471 |
| Zheleva S., Zhelev T. | DOI:10.3303/CET1125079 |
| Model-based Investigation of Vehicle Electrical Energy Storage Systems | 477 |
| Gollei G., Gorbe P., Magyar A. | DOI:10.3303/CET1125080 |
| Multiobjective Optimization of Large Scale Photovoltaic (pv) Systems Design: Technico-economic and Life-cycle Assessment Considerations | 483 |
| Perez Gallardo J.R., Astier S., Azzaro-Pantel C., Pibouleau L., Domenech S. | DOI:10.3303/CET1125081 |
| The Role of Knowledge Management in Corporate Decision Making Process: an Empirical Investigation | 489 |
| Al-Dujaili M. | DOI:10.3303/CET1125082 |
| Combinatorial Approach to Address Batch Scheduling Problems with Limited Storage Time | 495 |
| Hegyhati M., Holczinger T., Szoldatics A., Friedler F. | DOI:10.3303/CET1125083 |
| THERMAL TREATMENT OF WASTE INCLUDING WASTE TO ENERGY | |
| Waste-to-energy Plant Integrated Into Existing Energy Producing System | 501 |
| Tous M., Ferdan T., Pavlas M., Ucekaj V., Popela P. | DOI:10.3303/CET1125084 |
| Co-production of Electricity and Hydrogen from Coal and Biomass Gasification | 507 |
| Perez-Fortes M., Bojarski A.D., Puigjaner L. | DOI:10.3303/CET1125085 |
| Waste-to-energy Technologies Performance Evaluation Techniques | 513 |
| Nemet A., Varbanov P., Klemes J.J. | DOI:10.3303/CET1125086 |
| Characterization of Chars Produced in the Co-pyrolysis of Different Wastes: Decontamination and Leaching Studies | 521 |
| Bernardo M., Lapa N., Goncalves M., Mendes B., Pinto F. | DOI:10.3303/CET1125087 |
| Combined Heat and Power Production Planning Under Liberalized Market Conditions | 527 |
| Dvorak M., Havel P. | DOI:10.3303/CET1125088 |
| Waste-to-energy Systems Modelling Using In-house Developed Software | 533 |
| Kropac J., Pavlas M., Fusek M., Klimek P., Tous M. | DOI:10.3303/CET1125089 |
| Technical and Economic Analysis for a Med System and Hybrid Med-ro Desalination in Chp Plant | 539 |
| Ghelichzadeh J., Derakhshan R., Dolatshahi A., Asadi A. | DOI:10.3303/CET1125090 |
| Thermal Valorization of Wood Waste by Pyrolysis at Low Temperature | 545 |
| Kemiha M., Nzihou A., Mateos D. | DOI:10.3303/CET1125091 |
| VOL II | |
| PROCESS INTEGRATION FOR SUSTAINABLE DEVELOPMENT | |
| Saving Study on a Large Steel Plant by Total Site Based Pinch Technology | 551 |
| Matsuda K., Tanaka S., Endou M., Iiyoshi T. | DOI:10.3303/CET1125092 |
| A Novel Approach for Including Multi Phase Flows Into Pinch Analysis – the Heat Exchange Limits Estimated by the Advanced Composite Curves | 557 |
| Ruohonen P., Sivill L. | DOI:10.3303/CET1125093 |
| Structure Optimization Method for Flexible Water Usage Network with Many Contaminants | 563 |
| Poplewski G. | DOI:10.3303/CET1125094 |
| Energy Savings Vs. Freshwater Consumption When Optimizing Total Wastewater Networks | 569 |
| Tudor R., Lavric V. | DOI:10.3303/CET1125095 |
| Life Cycle Assessment and Multi-criteria Optimization of Regional Biomass and Bioenergy Supply Chains | 575 |
| Cucek L., Klemes J.J., Varbanov P., Kravanja Z. | DOI:10.3303/CET1125096 |
| Reducing the Power Penalty Related to CO2 Conditioning in Oxy-coal Combustion Plants by Pinch Analysis | 581 |
| Fu C., Gundersen T. | DOI:10.3303/CET1125097 |
| Synthesis of Inter-plant Water Networks Involving Batch and Continuous Processes | 587 |
| Chen C.L., Lin C.Y., Lee J.Y., Foo D.C.Y. | DOI:10.3303/CET1125098 |
| Heat Exchanger Network Retrofit Through Heat Transfer Enhancement | 593 |
| Wang Y., Smith R., Kim J.K. | DOI:10.3303/CET1125099 |
| Evolution of Water-using Networks with Multiple Contaminants | 599 |
| Li B.H., Chang C.T. | DOI:10.3303/CET1125100 |
| Optimising the Temperature of Heat Storage to Serve Processes with Varying Supply and Demand - Captured Solar Energy Curve | 605 |
| Nemet A., Klemes J.J. | DOI:10.3303/CET1125101 |
| Multi-product Dividing Wall Columns: a Simple and Effective Assessment and Conceptual Design Procedure | 611 |
| Halvorsen I.J., Skogestad S., Dejanovic I., Matijasevic L., Olujic Z. | DOI:10.3303/CET1125102 |
| Potential of Membrane Operations in Redesigning Industrial Processes. the Ethylene Oxide Manufacture | 617 |
| Bernardo P., Clarizia G. | DOI:10.3303/CET1125103 |
| Multi-objective Optimization of Semi-continuous Water Networks | 623 |
| Dogaru E.L., Lavric V. | DOI:10.3303/CET1125104 |
| Process Energy Sustainability Evaluation Through a Lca Approach | 629 |
| Ruggeri B., Sanfilippo S., Tommasi T., Fino D. | DOI:10.3303/CET1125105 |
| Exergy Analysis of the Production of Lignocellulosic Ethanol | 635 |
| Modarresi A., Kravanja P., Friedl A. | DOI:10.3303/CET1125106 |
| Compact Multi-fuel Autothermal Reforming Catalytic Reactor for H2 Production | 641 |
| Palma V., Palo E., Ricca A., Ciambelli P. | DOI:10.3303/CET1125107 |
| Dynamic Analysis and Controllability of Dividing-wall Distillation Columns | 647 |
| Ignat R., Woinaroschy A. | DOI:10.3303/CET1125108 |
| Minimization of CO2 Emissions and Primal Energy by Building Materials’ Environmental Evaluation and Optimization | 653 |
| Estokova A., Porhincak M., Ruzbacky R. | DOI:10.3303/CET1125109 |
| Design and Optimization of Total Site Energy Systems for Chemical Plants | 659 |
| Chen C.L., Lin C.Y. | DOI:10.3303/CET1125110 |
| INDUSTRIAL & EXPERIMENTAL STUDIES | |
| Evaluation of Vipertex Enhanced Heat Transfer Tubes Under Fouling Conditions | 665 |
| Kukulka D., Smith R., Jason Z. | DOI:10.3303/CET1125111 |
| Modelling of NOX Selective Catalytic Reduction in Pulverised Coal Power Plants | 671 |
| Kanniche M., Mourigal M., Gros S. | DOI:10.3303/CET1125112 |
| Structure Optimization Based on Pseudo-temperature of Heat Exchanger Network for Batch Processes | 677 |
| Du J., Li C., Chen L. | DOI:10.3303/CET1125113 |
| A Novel Photo-electrochemical Approach for the Chemical Recycling of Carbon Dioxide to Fuels | 683 |
| Ampelli C., Passalacqua R., Genovese C., Perathoner S., Centi G. | DOI:10.3303/CET1125114 |
| Design, Development and Operation of the Energy Efficient CO2 Removal for the Oxidative Coupling of Methane | 689 |
| Stuenkel S., Torquet M., Drescher A., Wozny G. | DOI:10.3303/CET1125115 |
| Comparison of Closed and Open Operation Modes of Batch Distillation | 695 |
| Hegely L., Lang P. | DOI:10.3303/CET1125116 |
| Management of a Cooling Tower System by Experimental Characterization | 701 |
| Mello L., Song T., Paiva J. | DOI:10.3303/CET1125117 |
| Kinetics of the Fischer-tropsch Reaction over a Ru Promoted Co/al2o3 Catalyst | 707 |
| Bhatelia T., Ma W., Davis B., Jacobs G., Bukur D. | DOI:10.3303/CET1125118 |
| Modelling of Calcium Carbonate Synthesis by Gas-liquid Reaction Using CO2 from Flue Gases | 713 |
| Isopescu R., Mihai M., Capat C., Olaru A., Mateescu C., Dumitrescu O., Udrea I. | DOI:10.3303/CET1125119 |
| Physical Modeling and Control of a Distributed Parameter System | 719 |
| Toth L.R., Nagy L., Szeifert F. | DOI:10.3303/CET1125120 |
| Batch Heteroazeotropic Distillation in a New Generalised Double-column System | 725 |
| Denes F., Lang P., Joulia X. | DOI:10.3303/CET1125121 |
| Application of Solar Chp System in a University Campus for Reduction of CO2 Emission | 731 |
| Khosronezhad B., Dehghani M.R., Safahiye T. | DOI:10.3303/CET1125122 |
| Modeling and Hazard Analysis for Contaminated Sediments Using Stamp Model | 737 |
| Hardy K., Guarnieri F. | DOI:10.3303/CET1125123 |
| Mathematical Model of Biomass Boiler for Control Purposes | 743 |
| Masa V., Pavlas M., Svarc I. | DOI:10.3303/CET1125124 |
| CFD AND INTEGRATED AND MULTIFUNCTIONAL OPERATIONS | |
| Numerical Study of the Convective Heat Transfer Rate from a Window Covered by a Top Down – Bottom Up Plane Blind System to an Adjacent Room | 749 |
| Oosthuizen P., Paul J. | DOI:10.3303/CET1125125 |
| Guided Design of Heating and Cooling Mains for Lower Water and Energy Consumption and Increased Efficiency | 755 |
| Gololo V., Majozi T., Zhelev T., Semkov K. | DOI:10.3303/CET1125126 |
| Neural Networks and Support Vector Machine Models Applied to Energy Consumption Optimization in Semiautogeneous Grinding | 761 |
| Curilem M., Acuna G., Cubillos F., Vyhmeister E. | DOI:10.3303/CET1125127 |
| Flushing Flow Rates Analysis in Eight-zone Smb Process for P-xylene Separation | 767 |
| Sutanto P.S., Lim Y.I., Lee J. | DOI:10.3303/CET1125128 |
| Cost Reduction Through Energy Improvement Using the Engage Method | 773 |
| Morrison A. | DOI:10.3303/CET1125129 |
| Design of Glycerol Etherification Process by Reactive Distillation | 779 |
| Vlad E., Bildea C.S., Mihalachi M., Bozga G. | DOI:10.3303/CET1125130 |
| Dem Simulation on the Mixing of Rice Husk Powder in a Screw Feeder with Various Screws | 785 |
| Kimata M., Endo Y., Banzai K., Hasegawa M. | DOI:10.3303/CET1125131 |
| Residence Time Distribution in Corning® Advanced-flowtm Reactor. Experiment and Modelling | 791 |
| Chivilikhin M., Kuandykov L., Cerato-Noyerie C., Woehl P., Lavric E.D. | DOI:10.3303/CET1125132 |
| Effervescent Spray Modelling: Investigation of Drop Momentum Models and Validation by Measured Data | 797 |
| Broukal J., Hajek J. | DOI:10.3303/CET1125133 |
| Energy Considerations in CFD Modelling of Biomass Combustion in an Experimental Fixed-bed Reactor | 803 |
| Jurena T., Hajek J. | DOI:10.3303/CET1125134 |
| Numerical Investigation of Performance of Natural Draft Dry-cooling Towers with Different Cooling Delta Angles | 809 |
| Wang J., Zeng M., Wang Q., Dong Z. | DOI:10.3303/CET1125135 |
| SUSTAINABLE BIOFUEL PRODUCTION | |
| Fermentative Hydrogen Production: Influence of Application of Mesophilic and Thermophilic Bacteria on Mass and Energy Balances | 815 |
| Foglia D., Wukovits W., Friedl A., De Vrije T., Claassen P.A.M. | DOI:10.3303/CET1125136 |
| Production of Bioparaffins from Natural Triglycerides | 821 |
| Hancsok J., Kasza T., Kovacs S., Solymosi P., Hollo A. | DOI:10.3303/CET1125137 |
| Integrated Biodiesel Plants: Options and Perspectives | 827 |
| Vlysidis A., Binns M., Webb C., Theodoropoulos C. | DOI:10.3303/CET1125138 |
| Membrane Systems for the Recovery of Hydrogen from Multicomponent Gas Mixtures Obtained in Biomass Gasification | 833 |
| Makaruk A., Miltner M., Harasek M. | DOI:10.3303/CET1125139 |
| Water and Wastewater Management in a Sugar Process Production | 839 |
| Gonzalez Cortes M., Verelst H., Gonzalez Suarez E. | DOI:10.3303/CET1125140 |
| Raceway Pond Design for Micoalgae Culture for Biodiesel | 845 |
| Sanchez A., Gonzalez A., Maceiras R., Cancela A., Urrejola S. | DOI:10.3303/CET1125141 |
| Investigation of Biofuels Properties | 851 |
| Da Silva N.L., Batistella C.B., Maciel Filho R., Wolf Maciel M.R. | DOI:10.3303/CET1125142 |
| Comparative Study of Biodiesel Production from Soybean Oil and Coconut Oil Using a Multiple-stage Ultra Shear Reactor | 857 |
| Da Silva N.L., Batistella C.B., Maciel Filho R., Wolf Maciel M.R. | DOI:10.3303/CET1125143 |
| Process Simulation of Ethanol from Straw – Validation of Scenarios for Austria | 863 |
| Kravanja P., Friedl A. | DOI:10.3303/CET1125144 |
| Process Analysis and Modeling for 2nd Generation Lignocellulosic Bioethanol Production | 869 |
| Porzio G.F., Prussi M., Chiaramonti D. | DOI:10.3303/CET1125145 |
| INTEGRATION OF RENEWABLES, BIOMASS AND ENERGY CONVERSION TECHNOLOGIES | |
| Usage of Solar Energy in an Industrial Process | 875 |
| Quijera J.A., González Alriols M., Labidi J. | DOI:10.3303/CET1125146 |
| Defining Optimal Configurations of Geothermal Systems Using Process Design and Process Integration Techniques | 881 |
| Gerber L., Marechal F. | DOI:10.3303/CET1125147 |
| Methodology for Batch Heat Integration and Storage System Design for Ideal Integration of Solar Process Heat | 887 |
| Muster-Slawitsch B., Brunner C., Padinger R., Schnitzer H. | DOI:10.3303/CET1125148 |
| Low Voltage Grid Optimization with Power Injection of Renewable Sources and Ev Batteries | 893 |
| Gorbe P., Magyar A., Hangos K.M. | DOI:10.3303/CET1125149 |
| Geographic Distribution and Economic Potential of Biogas from Croatian Farming Sector | 899 |
| Puksec T., Duic N. | DOI:10.3303/CET1125150 |
| Cost Effective Greenhouse Gas Reductions in the Steel Industry from an Organic Rankine Cycle | 905 |
| Walsh C., Thornley P. | DOI:10.3303/CET1125151 |
| Simultaneous Synthesis of a Biogas Process and Heat Exchanger Network for a Large-scale Meat Company | 911 |
| Drobez R., Novak Z., Pahor B., Kravanja Z. | DOI:10.3303/CET1125152 |
| A New Shaftwork Targeting Model for Total Sites | 917 |
| Ghannadzadeh A., Perry S., Smith R. | DOI:10.3303/CET1125153 |
| Overview of Footprints and Relations Between Carbon and Nitrogen Footprints | 923 |
| Cucek L., Klemes J.J., Kravanja P. | DOI:10.3303/CET1125154 |
| Investigation of a Dual-bed Autothermal Reforming of Methane for Hydrogen Production | 929 |
| Arpornwichanop A., Wasuleewan M., Patcharavorachot Y., Assabumrungrat S. | DOI:10.3303/CET1125155 |
| Strategic Decision Analysis of Multi-product Biorefineries | 935 |
| Sharma P., Romagnoli J. | DOI:10.3303/CET1125156 |
| Simulation and Evaluation of Autonomous and Annexed Sugarcane Distilleries | 941 |
| Junqueira T.L., Dias M.O.S., Jesus C.D.F., Mantelatto P.E., Cunha M.P., Cavalett O., Maciel Filho R., Rossell C.E.V., Bonomi A. | DOI:10.3303/CET1125157 |
| Catalytic Activity of Ceo2 Supported Pt-ni and Pt-co Catalysts in the Low Temperature Bio-ethanol Steam Reforming | 947 |
| Palma V., Palo E., Castaldo F., Ciambelli P., Iaquaniello G. | DOI:10.3303/CET1125158 |
| Efficient Hydrogen Fermentation for 2 - Stage Anaerobic Digestion Processes: Conversion of Sucrose Containing Substrates | 953 |
| Noebauer S., Schnitzhofer W. | DOI:10.3303/CET1125159 |
| Anaerobic Fermentation of Food Waste: Comparison of Two Bioreactor Systems | 959 |
| Kastner V., Schnitzhofer W. | DOI:10.3303/CET1125160 |
| Energy Optimization of an Installation of Reversible Geothermal Heat Pump | 965 |
| Cerdeira F., Vazquez M.E., Pose M., Alvarez E. | DOI:10.3303/CET1125161 |
| Heat Integration Analysis of Gasification Process for Hydrogen Production from Oil Palm Empty Fruit Bunch | 971 |
| Inayat A., Ahmad M.M., Abdul Mutalib M.I., Yusup S. | DOI:10.3303/CET1125162 |
| Efficient Integration of Biofuel and Chemical Production Processes with Pulp Mills and Energy Production | 977 |
| Melin K., Hurme M., Parviainen K. | DOI:10.3303/CET1125163 |
| CLEAN TECHNOLOGIES - LOW EMISSIONS TECHNOLOGIES | |
| Process Design and Evaluation of Biobased Polyhydroxyalkanoates (pha) Production | 983 |
| Kettl K.H., Titz , Koller M., Shahzad K., Schnitzer H., Narodoslawsky M. | DOI:10.3303/CET1125164 |
| A Smart Solar Reactor for Environmentally Clean Chemical Processing | 989 |
| Ozalp N., Toyama A., Mohamed M., Alshammasi M., Raymond Roshan D., Farghaly A. | DOI:10.3303/CET1125165 |
| Renewable Energy Based Environmental Accounting of Heat, Power and Steel Production | 995 |
| Sha S., Losowska M., Hurme M. | DOI:10.3303/CET1125166 |
| Influence of Operative Parameters on Microwave Regeneration of Catalytic Soot Wff for Diesel Engines | 1001 |
| Palma V., Ciambelli P., Meloni E. | DOI:10.3303/CET1125167 |
| Environmental and Economic Assessment of Bioethanol, Sugar and Bioelectricity Production from Sugarcane | 1007 |
| Cavalett O., Cunha M.P., Junqueira T.L., Dias M.O.S., Jesus C.D.F., Mantelatto P.E., de Fatima Cardoso T., Junqueira Franco H.C., Maciel Filho R., Bonomi A. | DOI:10.3303/CET1125168 |
| Photo-fenton Oxidation of Acetic Acid on Supported Lafeo3 and Pt/lafeo3 Perovskites | 1013 |
| Sannino D., Vaiano V., Isupova L., Ciambelli P. | DOI:10.3303/CET1125169 |
| Parameter Estimation and Thermodynamic Model Fitting for Components in Mixtures for Bio-diesel Production | 1019 |
| Rossi C.C.R.S., Cardozo-Filho L., Guirardello R. | DOI:10.3303/CET1125170 |
| Mathematical Model of the Carbon Monoxide Conversion in Porous Catalyst | 1025 |
| Ved O., Tolchinsky Y., Kapustenko P. | DOI:10.3303/CET1125171 |
| Effect of Magnesium and Calcium Salts on the Sulfation Capacity of Trona Slurry | 1031 |
| Ozyuguran A., Senturk-Unal G., Ersoy-Mericboyu A. | DOI:10.3303/CET1125172 |
| Dyes Adsorption on Functionalized Fibrous Materials | 1037 |
| Ferrero F., Periolatto M. | DOI:10.3303/CET1125173 |
| SUSTAINABLE PROCESSING AND PRODUCTION | |
| Energy Supply Chain Optimization Under Demand Variation and Emission Constraints | 1043 |
| Bounovas V., Papadopoulos A., Seferlis P., Voutetakis P. | DOI:10.3303/CET1125174 |
| Energy and Water Efficiency in the Automotive Sector: a Case Study on the Potential to Improve the Economical and Ecological Performance of an Automotive Supplier | 1049 |
| Enderle P., Nowak O. | DOI:10.3303/CET1125175 |
| Optimal Design of Reverse Osmosis Based Desalination Process with Seasonal Variation of Feed Temperature | 1055 |
| Sassi K., Mujtaba I. | DOI:10.3303/CET1125176 |
| Intensive Ion Exchange Process for Soluble Proteins Recovery from Industrial Alfalfa Green Juice | 1061 |
| Kerfai S., Mathe S., Alfenore S., Fernandez A. | DOI:10.3303/CET1125177 |
| Organophosphated Fertilizers Production in Humifert Process | 1067 |
| Rodrigues V.L., Pires Camacho J.L., Toledo M.C.M., Taqueda M.E.S. | DOI:10.3303/CET1125178 |
| On Energetic Sustainability of Dark Anaerobic Fermentation of Biohydrogen | 1073 |
| Tommasi T., Ruggeri B., Sanfilippo S. | DOI:10.3303/CET1125179 |
| Effective Utilization of Alternative Materials in Lightweight Composites | 1079 |
| Kidalova L., Stevulova N., Terpakova E., Helcman M. | DOI:10.3303/CET1125180 |
| Energy Savings in Sugar Manufacturing with the Implementation of New Membrane Process | 1085 |
| Gul S., Harasek M. | DOI:10.3303/CET1125181 |
| Improvement of Solar Humidification-dehumidification Desalination Using Multi Stage Process | 1091 |
| Zamen M., Soufari S.M., Amidpour M. | DOI:10.3303/CET1125182 |