CHEMICAL
ENGINEERING
TRANSACTIONS
- VOL.39
Guest Editors: Petar Varbanov, Jirí
Kleme, Peng Yen Liew, Jun Yow Yong
Copyright © 2014, AIDIC Servizi S.r.l.,
ISBN 978-88-95608-30-3; ISSN 2283-9216
Table
of Contents & Authors Index
|
DOI
|
Process
Integration for Sustainable Development
|
|
Renewable Energy Systems - a Smart Energy Systems Approach to the Choice and Modelling of 100 % Renewable Solutions | 1 |
Lund H., Mathiesen B.V., Connolly D., Řstergaard P.A. | >DOI:
10.3303/CET1439001 |
Utility-heat Exchanger Grid Diagram: a Tool for Designing the Total Site Heat Exchanger Network | 7 |
Liew P.Y., Wan Alwi S.R., Klemeš J.J., Varbanov P.S., Manan Z.A. | >DOI:
10.3303/CET1439002 |
Rate-based Modelling of CO2 Capture Process by Reactive Absorption with Mea | 13 |
Li B.H., Zhang N., Smith R. | >DOI:
10.3303/CET1439003 |
Flowrate Targeting for Interplant Hydrogen Networks | 19 |
Deng C., Zhou Y., Li Y., Feng X. | >DOI:
10.3303/CET1439004 |
Automated Optimisation of Multi Stage Refrigeration Systems within a Multi-objective Optimisation Framework | 25 |
Sharma I., Hoadley A., Mahajani S.M., Ganesh A. | >DOI:
10.3303/CET1439005 |
Comparative Studies of Low Temperature Water Gas Shift Reaction over Platinum Based Catalysts | 31 |
Palma V., Pisano D., Martino M., Ricca A., Ciambelli P. | >DOI:
10.3303/CET1439006 |
Energy Efficient Control and Optimisation of Distillation Column Using Artificial Neural Network | 37 |
Osuolale F.N., Zhang J. | >DOI:
10.3303/CET1439007 |
Energy Integration of Large-scale Industrial Sites with Target-compatible Sub-system Division Strategy | 43 |
Pouransari N., Maréchal F. | >DOI:
10.3303/CET1439008 |
Optimisation of Cooling-water Systems Considering Temperature-rise and Pressure-drop | 49 |
Sun J., Feng X., Wang Y. | >DOI:
10.3303/CET1439009 |
Optimum Energy Management in Smart Grids Based on Power Pinch Analysis | 55 |
Giaouris D., Papadopoulos A.I., Seferlis P., Papadopoulou S., Voutetakis S., Stergiopoulos F., Elmasides C. | >DOI:
10.3303/CET1439010 |
Pinch Position Between Heat Carrier and Working Fluid in Organic Rankine Cycle for Waste Heat Recovery | 61 |
Yu H., Feng X. | >DOI:
10.3303/CET1439011 |
Techno-economic Analysis of Low Temperature Waste Heat Recovery and Utilization at an Integrated Steel Plant in Sweden | 67 |
Bellqvist D., Wang C., Nilsson L. | >DOI:
10.3303/CET1439012 |
Design Method of Optimal and Flexible Water Networks with Regeneration Processes | 73 |
Poplewski G. | >DOI:
10.3303/CET1439013 |
Exergy Analysis Applied to Separation Processes in a FCC Plant Using Computational Models | 79 |
Caballero E.F., Hoyos L.J., Kafarov V., Barajas C. | >DOI:
10.3303/CET1439014 |
Integration of Nanofiltration for the Sustainable Management of Reverse Osmosis Brines | 85 |
Pérez-González A., Ibáńez R., Gómez P., Urtiaga A., Ortiz I. | >DOI:
10.3303/CET1439015 |
Methodology for Minimising the Utility Consumption of a 2G Ethanol Process | 91 |
Bechara R., Gomez A., Saint-Antonin V., Albarelli J.Q., Ensinas A., Schweitzer J.M., Maréchal F. | >DOI:
10.3303/CET1439016 |
Shifted Retrofit Thermodynamic Diagram: a Modified Tool for Retrofitting Heat Exchanger Networks | 97 |
Yong J.Y., Varbanov P.S., Klemeš J.J. | >DOI:
10.3303/CET1439017 |
Implementing Energy Efficiency Measures in Industrial Clusters – a Design Approach for Site-wide Heat Recovery Systems | 103 |
Hackl R., Harvey S. | >DOI:
10.3303/CET1439018 |
An Innovative Dimethyl Ether (dme) Production Using Self-heat Recuperation | 109 |
Kansha Y., Ishizuka M., Song C., Tsutsumi A. | >DOI:
10.3303/CET1439019 |
Optimization of the Coagulation Process to Remove Total Suspended Solids (tss) from Produced Water | 115 |
Roccaro P., Lombardo G., Vagliasindi F.G.A. | >DOI:
10.3303/CET1439020 |
New Heat Exchanger Network Design Model | 121 |
Jongsuwat P., Suriyapraphadilok U., Bagajewicz M. | >DOI:
10.3303/CET1439021 |
A User-defined Pervaporation Unit Operation in Aspenplus© on the Basis of Experimental Results from Three Different Organophilic Membranes | 127 |
Rom A., Gimeno D.E., Friedl A. | >DOI:
10.3303/CET1439022 |
The Optimization-based Design and Synthesis of Water Network for Water Management in an Industrial Process: Refinery Effluent Treatment Plant | 133 |
Sueviriyapan N., Siemanond K., Quaglia A., Gani R., Suriyapraphadilok U. | >DOI:
10.3303/CET1439023 |
Evaluation of Structures Design Concept of Lower Structure from Embodied Energy and Emissions | 139 |
Sedláková A., Vilceková S., Burdová E.K. | >DOI:
10.3303/CET1439024 |
Energy
Saving Technology
|
|
Pdlf-based Robust MPC of a Heat Exchanger Network | 145 |
Bakošová M., Oravec J. | >DOI:
10.3303/CET1439025 |
An Experimental Investigation of Energy Saving in Air Compressors | 151 |
Dizadji N., Rashtchi M. | >DOI:
10.3303/CET1439026 |
Modeling of Multi - Layer Foam Gypsum Drying Process | 157 |
Gross U., Iljins U., Skujans J., Gajevskis A. | >DOI:
10.3303/CET1439027 |
An Advanced Cryogenic Air Separation Process for Integrated Gasification Combined Cycle (igcc) Systems | 163 |
Fu Q., Kansha Y., Liu Y., Song C., Ishizuka M., Tsutsumi A. | >DOI:
10.3303/CET1439028 |
The choice of the optimal retrofit method for sections of the catalytic reforming unit | 169 |
Ulyev L. M. , Kapustenko P. O., Nechiporenko D. D. | >DOI:
10.3303/CET1439029 |
Theoretical and Experimental Investigation on the Energy Consumption of Self-heat Recuperation Using Magnetocaloric Effect | 175 |
Kotani Y., Kansha Y., Ishizuka M., Tsutsumi A. | >DOI:
10.3303/CET1439030 |
A Novel Thermal Desalination Process Using Fluidized Bed | 181 |
Mizuno H., Kansha Y., Ishizuka M., Tsutsumi A. | >DOI:
10.3303/CET1439031 |
Aromatics Extraction. 2. Economic Aspects | 187 |
Steltenpohl P., Graczová E. | >DOI:
10.3303/CET1439032 |
Water and Heat Exchanger Network Design for Fixed-flowrate System | 193 |
Thongpreecha S., Siemanond K. | >DOI:
10.3303/CET1439033 |
Comparison of Sequential and Simultaneous Approaches for Multiperiod Heat Exchanger Network Synthesis and Application for Crude Preheat Train | 199 |
Tangnanthanakan P., Siemanond K. | >DOI:
10.3303/CET1439034 |
CO2 Minimisation
and Mitigation
|
|
A Graphical Approach for the Planning and Design of a Low Carbon Product | 205 |
Mohd Nawi W.N.R., Wan Alwi S.R., Manan Z.A., Klemeš J.J. | >DOI:
10.3303/CET1439035 |
Efficient Screening and Selection of Post-combustion CO2 Capture Solvents | 211 |
Papadopoulos A.I., Badr S., Chremos A., Forte E., Zarogiannis T., Seferlis P., Papadokonstantakis S., Adjiman C.S., Galindo A., Jackson G. | >DOI:
10.3303/CET1439036 |
Biological Carbon Sequestration and Utilization via Algal Biorefinery | 217 |
Gong J., You F. | >DOI:
10.3303/CET1439037 |
N2 Brayton Cycle in Oxy-combustion Power Plants | 223 |
Fu C., Gundersen T. | >DOI:
10.3303/CET1439038 |
Oxy-combustion Coal Based Power Plants: Study of Operating Pressure, Oxygen Purity and Downstream Purification Parameters | 229 |
Soundararajan R., Gundersen T., Ditaranto M. | >DOI:
10.3303/CET1439039 |
Response Surface Methodology Analysis of CO2 Photocatalytic Conversion in Presence of CH4 over Nitrogen-doped Titania Nanotube Arrays | 235 |
Delavari S., Amin N.A.S. | >DOI:
10.3303/CET1439040 |
Minimum Gas/liquid Flow Rate for Absorption Columns | 241 |
Sala M., Bonet J., Plesu V., Bonet Ruiz A.E., Iancu P., Llorens J. | >DOI:
10.3303/CET1439041 |
Assessment of Hydrogen and Power Co-generation Based on Biomass Direct Chemical Looping Systems | 247 |
Cormos C.C., Cormos A.M., Petrescu L. | >DOI:
10.3303/CET1439042 |
Ionic Liquid Design for Enhanced Carbon Dioxide Capture – a Computer Aided Molecular Design Approach | 253 |
Chong F.K., Eljack F.T., Atilhan M., Foo D.C.Y., Chemmangattuvalappil N.G. | >DOI:
10.3303/CET1439043 |
Effects of Different Polyethyleneimine Molecular Weights on CO2 Adsorption on Activated Carbon | 259 |
Ritmongkolpun P., Rangsunvigit P., Kulprathipanja S. | >DOI:
10.3303/CET1439044 |
Removing CO2 from Biogas – the Optimisation of a Pressure Swing Adsorption (psa) Unit Using Breakthrough Curves | 265 |
Lestinsky P., Vecer M., Navrátil P., Stehlík P. | >DOI:
10.3303/CET1439045 |
Adsorption Behaviour of Si-mcm-41 for Co2: Effect of Pressure and Temperature on Adsorption | 271 |
Ramli A., Ahmed S., Yusup S. | >DOI:
10.3303/CET1439046 |
Modeling and Optimization of a Two-stage Mof-based Pressure/vacuum Swing Adsorption Process Coupled with Material Selection | 277 |
Leperi K., Gao H., Snurr R.Q., You F. | >DOI:
10.3303/CET1439047 |
Combined
Heat and Power, Combined Cycles
|
|
Assessment of Working Fluid Mixtures for Solar Organic Rankine Cycles | 283 |
Mavrou P., Papadopoulos A.I., Stijepovic M., Seferlis P., Linke P., Voutetakis S. | >DOI:
10.3303/CET1439048 |
Flexible Operation of Cooling System for Reducing Energy Consumption | 289 |
Martinez-Patińo J., Núńez M.P., Hernández-Figueroa M.A., Martínez A.P. | >DOI:
10.3303/CET1439049 |
Heat
Exchangers as Equipment and Integrated Items
|
|
Flow Maldistribution in Industrial Air Heaters and Its Effect on Heat Transfer | 295 |
Atkins M.J., Neale J.R., Walmsley M.R.W., Walmsley T.G., De Leon G. | >DOI:
10.3303/CET1439050 |
Design of Heat Exchangers in Complex Arrangements for Use in Preheat Trains | 301 |
Picón-Núńez M., Rodríguez-Ibarra J.E., Alvarado-Briones B. | >DOI:
10.3303/CET1439051 |
Phex: a Computational Tool for Plate Heat Exchangers Design Problems | 307 |
Palmeira J., Fernandes C., Matos H.A., Silva J. | >DOI:
10.3303/CET1439052 |
About the Possibilities of the Heat Exchangers Network Retrofit for Post-combustion CO2 Capture Unit Without Stream Split | 313 |
Perevertaylenko O.Y., Gariev A.O., Damartzis T., Tovazhnyansky L.L., Kapustenko P.O., Arsenyeva O.P. | >DOI:
10.3303/CET1439053 |
Parametric Study on Flow and Heat Transfer Performance of Multi-flow Spiral-wound Heat Exchanger | 319 |
Zhang G., Lu X., Du X., Zeng M., Wang Q. | >DOI:
10.3303/CET1439054 |
Optimisation of Fin Selection and Thermal Design of Plate-fin Heat Exchangers | 325 |
Guo K., Zhang N., Smith R. | >DOI:
10.3303/CET1439055 |
Control of a Heat Exchanger Using Neural Network Predictive Controller and Auxiliary Fuzzy Controller | 331 |
Vasickaninová A., Bakošová M. | >DOI:
10.3303/CET1439056 |
Integration
of Renewables, Biomass and Energy Conversion Technologies
|
|
Introduction of Novel Analysis Technique: Biomass Element Life Cycle Analysis (belca) | 337 |
Lim C.H., Lam H.L. | >DOI:
10.3303/CET1439057 |
Electrical Parameters of the Electric Power Production Using Biogas | 343 |
Hernández-Figueroa M.A., Martinez-Patińo J., Ireta-Moreno F., Lozano-García J.M. | >DOI:
10.3303/CET1439058 |
Hydrogen Production Form Glycerol Steam Reforming in Supercritical Water with CO2 Absorption Unit | 349 |
Patcharavorachot Y., Chery-rod N., Nudchapong S., Authayanun S., Arpornwichanop A. | >DOI:
10.3303/CET1439059 |
Integration of Desalination and Renewables, a Demonstration of the Desalination Module in the H2res Model: Case Study for Jordan | 355 |
Novosel T., Gaparovic G., Cosic B., Mustafa M., Krajacic G., Pukšec T., Duic N. | >DOI:
10.3303/CET1439060 |
Options for Solar Thermal and Heat Recovery Loop Hybrid System Design | 361 |
Walmsley M.R.W., Walmsley T.G., Atkins M.J., Neale J.R. | >DOI:
10.3303/CET1439061 |
Performance Improvement of Biomass Cogeneration Plant by Dual Loop Organic Rankine Cycle | 367 |
Loncar D., Guzovic Z., Šerman N. | >DOI:
10.3303/CET1439062 |
Heat Recovery Aspects of Importance for the Product Mix and GHG Emission Reductions in a Bio-sng System | 373 |
Holmgren K.M., Berntsson T.S., Andersson E., Rydberg T. | >DOI:
10.3303/CET1439063 |
Biodiesel Production from Microalgae: Ionic Liquid Process Simulation | 379 |
Piemonte V., Di Paola L., Gentile A., Masciocchi B., Russo V., Iaquaniello G. | >DOI:
10.3303/CET1439064 |
Thermo-economic Comparison of Different Layouts of a Steam Power Plant Integrated with Geothermal Resource | 385 |
Becciani M., De Maria C., Manfrida G., Tempesti D. | >DOI:
10.3303/CET1439065 |
Study of the Efficiency of a HT Power-to-gas Process | 391 |
De Saint Jean M., Baurens P., Bouallou C. | >DOI:
10.3303/CET1439066 |
Mechanical Vapour Recompression Incorporated to the Ethanol Production from Sugarcane and Thermal Integration to the Overall Process Applying Pinch Analysis | 397 |
Palacios-Bereche R., Ensinas A.V., Modesto M., Nebra S.A. | >DOI:
10.3303/CET1439067 |
Biomass Characteristics Index: a Numerical Approach in Palm Bio-energy Estimation | 403 |
Tang J.P., Lam H.L., Abdul Aziz M.K., Morad N.A. | >DOI:
10.3303/CET1439068 |
Examination, Modelling and Simulation of Hydrogen Generation Cell for Complex Renewable Energy System | 409 |
Göllei A., Görbe P., Magyar A. | >DOI:
10.3303/CET1439069 |
Simulation of Hydrogen Production with in Situ CO2 Removal Using Aspen Plus | 415 |
Likkasith C., Saebea D., Arpornwichanop A., Piemnernkoom N., Patcharavorachot Y. | >DOI:
10.3303/CET1439070 |
Synthesis of Methyl Ester Sulphonate Surfactant from Palm Oil Methyl Ester by Using UV Or Ozone as an Initiator | 421 |
Tulathammakit H., Kitiyanan B. | >DOI:
10.3303/CET1439071 |
Integrated
and Multifunctional Operations
|
|
Design of Model Predictive Control for Butyl Acetate Production in Reactive Distillation | 427 |
Komkrajang T., Kheawhom S., Paengjuntuek W., Arpornwichanop A. | >DOI:
10.3303/CET1439072 |
Operations
Research and Supply Chain Management
|
|
Scheduling of Automated Wet-etch Stations | 433 |
Hegyháti M., Osz O., Kovács B., Friedler F. | >DOI:
10.3303/CET1439073 |
The R&d Value Cycle of Nano-enabled Medical Devices – the Case of Biosensors | 439 |
Siontorou C.G. | >DOI:
10.3303/CET1439074 |
Hazop Method in Identification of Risks in a Cpfr Supply Chain | 445 |
Mitkowski P.T., Zenka-Podlaszewska D. | >DOI:
10.3303/CET1439075 |
Pulp
and Paper
|
|
Study of Sodium Salts Solubility in Eucalyptus Black Liquor to Understand and Prevent Scale Formation in Evaporators | 451 |
Leite B.S., Andreuccetti M.T., Leite S.A.F., d´Angelo J.V.H. | >DOI:
10.3303/CET1439076 |
Clean
Technologies - Low Emissions Technologies
|
|
Optimal Design of Spatially Constrained Interplant Water Networks with Direct Recycling Techniques Using Genetic Algorithms | 457 |
Alnouri S., Stijepovic M., Linke P., El-Halwagi M. | >DOI:
10.3303/CET1439077 |
Effect of Solvent Type and Extraction Conditions on the Recovery of Phenolic Compounds from Artichoke Waste | 463 |
Zuorro A., Maffei G., Lavecchia R. | >DOI:
10.3303/CET1439078 |
Simulation and Process Integration of Clean Acetone Plant | 469 |
Tohaneanu M.C., Plesu V., Iancu P., Bumbac G., Bonet Ruiz A.E., Bonet Ruiz J. | >DOI:
10.3303/CET1439079 |
Environomic Design of Vehicle Integrated Energy System – Application on a Hybrid Electric Vehicle Energy System | 475 |
Dimitrova Z., Maréchal F. | >DOI:
10.3303/CET1439080 |
Ashes Characterization for Biogas Cleaning from Landfill | 481 |
Chavez R.H., Guadarrama J.J. | >DOI:
10.3303/CET1439081 |
A Modeling Optimization of Photocatalytic Liquefaction of Turkish Lignites Using Response Surface Methodology | 487 |
Karacan F., Togrul T., Karacan S. | >DOI:
10.3303/CET1439082 |
Water and chemical management studies for cleaner production in a textile industry | 493 |
Ozturk E., Karaboyaci M., Koseoglu H., Yigit N.O., Yetis U., Kitis M. | >DOI:
10.3303/CET1439083 |
Photocatalytic and Antistain Properties of Ceramic Tiles Functionalized with Tungsten-doped Tio2 | 499 |
Vaiano V., Sarno G., Sannino D., Ciambelli P. | >DOI:
10.3303/CET1439084 |
Investigation of Co-gasification of Rubber Seed Shell and High Density Polyethylene Mixtures | 505 |
Chin B.L.F., Yusup S., Al Shoaibi A., Kannan P., Srinivasakannan C., Sulaiman S.A. | >DOI:
10.3303/CET1439085 |
Reactor Design of Microwave Assisted Demetallization of Heavy Crude Oil | 511 |
Shang H., Shi J., Li J., Liu Y., Zhang W. | >DOI:
10.3303/CET1439086 |
Ionic-liquid Based Separation of Azeotropic Mixtures | 517 |
Kulajanpeng K., Suriyapraphadilok U., Gani R. | >DOI:
10.3303/CET1439087 |
Comparative Study of Methane Adsorption on Activated Carbon and Metal Organic Frameworks | 523 |
Siangsai A., Kumpoomee N., Rangsunvigit P., Kitiyanan B., Kulprathipanja S. | >DOI:
10.3303/CET1439088 |
Sustainable
Processing and Production
|
|
Decision Making for Rapid Prototyping Technologies of Sustainable Products | 529 |
Canciglieri Junior O., Sant’Anna Â.M.O., Machado L.C. | >DOI:
10.3303/CET1439089 |
The Role of Companies in Accomplishing Environmental Sustainability Engineering | 535 |
Al-dujaili M.A.A. | >DOI:
10.3303/CET1439090 |
Resource Efficiency Studies Using a New Operator Training Simulator for a Bioethanol Plant | 541 |
Hass V.C., Kuntzsch S., Schoop K.-M., Winterhalter M. | >DOI:
10.3303/CET1439091 |
Biocomponent Containing Jet Fuel Production with Using Coconut Oil | 547 |
Eller Z., Varga Z., Varga G., Hancsók J. | >DOI:
10.3303/CET1439092 |
Enhancement of Anaerobic Digestion of Cellulosic Fraction in Cassava Production Wastewater by Microaeration | 553 |
Khongsumran O., Intanoo P., Rangsunvigit P., Chavadej S., Leethochawalit M. | >DOI:
10.3303/CET1439093 |
Long-term Water Absorption Behaviour of Hemp Hurds Composites | 559 |
Stevulova N., Cigasova J., Purcz P., Schwarzova I. | >DOI:
10.3303/CET1439094 |
Sustainable Gas Phase Selective Photocatalytic Oxidation of Cyclohexane on Moox/tio2/sio2 Catalysts | 565 |
Vaiano V., Sannino D., Ciambelli P. | >DOI:
10.3303/CET1439095 |
Theoretical Analysis of the Wall Deposition of Particles in Spray Dryers | 571 |
Patniboon A., Ponpesh P., Soottitantawat A., Arpornwichanop A. | >DOI:
10.3303/CET1439096 |
Simulation of CO2 Absorption Using the System K2co3-piperazine | 577 |
Arshad M., Wukovits W., Friedl A. | >DOI:
10.3303/CET1439097 |
Principles of Ethanol Organosolv Lignin Precipitation: Process Simulation and Energy Demand | 583 |
Weinwurm F., Drljo A., Silva T.L.S., Friedl A. | >DOI:
10.3303/CET1439098 |
Application of Cleaner Production Methodology to Evaluate the Generation of Bioenergy in a Small Swine Farm | 589 |
Leite S.A.F., Leite B.S., Isola A.T.P.D., Freitas L.S.F., Souza J.K.S. | >DOI:
10.3303/CET1439099 |
Life Cycle Assessment of Red and White Wines Production in Southern Italy | 595 |
Iannone R., Miranda S. , Riemma S., De Marco I. | >DOI:
10.3303/CET1439100 |
Environmental Analysis of Materials Used for Building Foundation | 601 |
Ondova M., Estokova A. | >DOI:
10.3303/CET1439101 |
Waste
Minimisation, Processing and Management including Waste to Energy
|
|
Waste Water Treatment Plants as Regional Energy Cells – Evaluation of Economic and Ecologic Potentials in Austria | 607 |
Kollmann R., Maier S., Shahzad K., Kretschmer F., Neugebauer G., Stoeglehner G., Ertl T., Narodoslawsky M. | >DOI:
10.3303/CET1439102 |
A Case Study for Environmental Impact Assessment in the Process Industry: Municipal Solid Waste Incineration (mswi) | 613 |
Margallo M., Aldaco R., Irabien A. | >DOI:
10.3303/CET1439103 |
Increasing the Photoactivity of N-doped Tio2 Photocatalysts Using Phosphors as Light Carriers | 619 |
Vaiano V., Sacco O., Sannino D., Ciambelli P. | >DOI:
10.3303/CET1439104 |
Sorption in Acidic Environment – Biosorbents in Comparison with Commercial Adsorbents | 625 |
Balintova M., Holub M., Stevulova N., Cigasova J., Tesarcikova N. | >DOI:
10.3303/CET1439105 |
Analysis of Requirement for Sewage Sludge Incineration | 631 |
Frýba L., Bébar L., Touš M. | >DOI:
10.3303/CET1439106 |
The Study of Bottom Sediment Characteristics as a Material for Beneficial Reuse | 637 |
Junakova N., Balintova M. | >DOI:
10.3303/CET1439107 |
Production and Physicochemical Characterization of Microspheres Made from Sericin and Alginate Blend | 643 |
da Silva T.L., da Silva Junior A.C., Vieira M.G.A., Gimenes M.L., da Silva M.G.C. | >DOI:
10.3303/CET1439108 |
Assessment of Sustainable Collection and Recycling Policy of Lead-acid Accumulators from the Perspective of System Dynamics Modelling | 649 |
Blumberga A., Timma L., Vilgerts J., Blumberga D. | >DOI:
10.3303/CET1439109 |
Development of an Integrated Approach to Neutraliszation of Oil-slime | 655 |
Sulman E.M., Prutenskaya E.A., Sulman M.G. | >DOI:
10.3303/CET1439110 |
Mechanisms of Copper and Mercury Adsorption on Bentonite Clays from EXAFS Spectroscopy | 661 |
Vieira M.G.A., de Almeida Neto A.F., da Silva M.G.C. | >DOI:
10.3303/CET1439111 |
Removal of Silver Ions on Calcined Verde-lodo Bentonite Clay: Equilibrium Study | 667 |
Cantuaria M.L., de Almeida Neto A.F., Nascimento E.S., dos Santos O.A.A., Vieira M.G.A. | >DOI:
10.3303/CET1439112 |
Thermal
Treatment of Waste including Waste to Energy
|
|
Waste-to-energy Plant Operation Planning Based on Stochastic Simulation | 673 |
Touš M., Pavlas M., Stehlík P. | >DOI:
10.3303/CET1439113 |
Gasification Conversion and Char Reactivity of Rubber Seed Shell and High Density Polyethylene Mixtures Using Steam Co-gasification Process | 679 |
Chin B.L.F., Yusup S., Al Shoaibi A., Kannan P., Srinivasakannan C., Sulaiman S.A. | >DOI:
10.3303/CET1439114 |
Impact of Zeolite Channel Structure on Structure of Hydrocarbon Compounds and Petrochemicals in Waste Tyre-derived Oils | 685 |
Muenpol S., Jitkarnka S. | >DOI:
10.3303/CET1439115 |
Improved Feasibility Analysis Under Volatile Conditions: Case of Waste-to-energy | 691 |
Ferdan T., Šomplák R., Pavlas M. | >DOI:
10.3303/CET1439116 |
Batch
Processes
|
|
Defeating the Sustainability Challenge in Batch Processes Through Low-cost Utilities Usage Reduction | 697 |
Rossi F., Manenti F., Kozin K.A., Goryunov A.G. | >DOI:
10.3303/CET1439117 |
Evaluation of the Behaviour of Objective Functions in the Optimization of a Batch Process for Biodiesel Production | 703 |
Tóth L.R., Torgyik T., Paor D., Nagy L. | >DOI:
10.3303/CET1439118 |
Dynamic,
Flexible and Sustainable Plant Operation
|
|
Feature Selection Based Root Cause Analysis for Energy Monitoring and Targeting | 709 |
Kulcsar T., Balaton M., Nagy L., Abonyi J. | >DOI:
10.3303/CET1439119 |
Efficient Decomposition Method for Integrating Production Sequencing and Dynamic Optimization for a Multi-product CSTR | 715 |
Chu Y., You F. | >DOI:
10.3303/CET1439120 |
Synergy Between Data Reconciliation and Principal Component Analysis in Energy Monitoring | 721 |
Farsang B., Németh S., Abonyi J. | >DOI:
10.3303/CET1439121 |
Industrial
and Experimental Studies
|
|
Condensation and Evaporation Characteristics of Vipertex 1EHT Enhanced Heat Transfer Tubes | 727 |
Kukulka D.J., Smith R., Li W. | >DOI:
10.3303/CET1439122 |
Thermogravimetric Analysis of Carbon Based Catalytic Decomposition of Methane | 733 |
Shilapuram V., Ozalp N. | >DOI:
10.3303/CET1439123 |
Discrete Modelling of a Multiparticle Diffusion Process and Front Propagation: Dynamics and Source Effects | 739 |
Reverberi A.P., Ferrando R., Fabiano B., Dově V.G. | >DOI:
10.3303/CET1439124 |
The Oligomerisation of High Olefin Containing Hydrocarbon Fractions on Ion Exchange Resin Catalyst | 745 |
Kriván E., Tomasek S., Hancsók J. | >DOI:
10.3303/CET1439125 |
A Theoretical and Experimental Investigation of Wastewater Treatment for a Polyethylene Terephthalate Production Unit | 751 |
Vafajoo L., Mohammadpour A., Khorasheh F. | >DOI:
10.3303/CET1439126 |
Experimental Design of Laboratory Measurements for Hydrocarbons, Salts and Dyes Adsorption on Modified Lignocellulosic Materials in Aquatic Media | 757 |
Apostolopoulos G., Fardis M., Chandrinou C., Giannakopoulos K., Kontos A., Bidikoudi M., Boukos N., Falaras P., Batzias F., Sidiras D., Siontorou C.G. | >DOI:
10.3303/CET1439127 |
Concentration Polarization in Reverse Osmosis Membranes: Effect of Membrane Splitting | 763 |
Reverberi A.P., Fabiano B., Cerrato C., Dově V.G. | >DOI:
10.3303/CET1439128 |
Optimal Design and Modernization of Small Incineration Unit for VOC Abatement | 769 |
Jecha D., Brummer V., Martinec J., Skryja P., Stehlík P. | >DOI:
10.3303/CET1439129 |
Gypsum Scale Inhibition on Process Equipment Surfaces: a Review | 775 |
Prisciandaro M., Lancia A., Musmarra D., di Celso G.M. | >DOI:
10.3303/CET1439130 |
Experimental Analysis of Spatial Evolution of Mean Droplet Diameters in Effervescent Sprays | 781 |
Broukal J., Hájek J. | >DOI:
10.3303/CET1439131 |
Experimental Study of Oxygen-enhanced Combustion on NOX Emission, In-flame temperatures and Heat Flux Distribution | 787 |
Belohradský P., Skryja P., Hudák I. | >DOI:
10.3303/CET1439132 |
Fault Tolerant Model Predictive Control for the Biopower 5 CHP Plant | 793 |
Kortela J., Jämsä-Jounela S.L. | >DOI:
10.3303/CET1439133 |
Numerical Methods for the Evaluation of Pollutant Dispersion Based on Advection-diffusion Equation | 799 |
Pereira M.F., Pozza S.A., Timóteo V.S. | >DOI:
10.3303/CET1439134 |
Industrial
Application and Optimal Design
|
|
Decrease in Consumption of Compressed Air in Dry Ice Blasting Machine | 805 |
Máša V., Kuba P., Petrilák D., Lokaj J. | >DOI:
10.3303/CET1439135 |
Stimuli-responsive Platforms for Integrated Multifunctional Intelligent Systems | 811 |
Siontorou C.G., Georgopoulos K.N. | >DOI:
10.3303/CET1439136 |
Experimental and Numerical Investigations on Structured Catalysts for Methane Steam Reforming Intensification | 817 |
Palma V., Miccio M., Ricca A., Meloni E., Ciambelli P. | >DOI:
10.3303/CET1439137 |
Development of an Industrial Iron-making Melter Gasifier Model with Multiphase Equilibrium Calculations | 823 |
Almpanis-Lekkas O., Wukovits W., Weiss B. | >DOI:
10.3303/CET1439138 |
Modelling Approach to the Evaluation of Explosion Limits of Ethylene-air Mixtures at Flowing Conditions for Industrial Process Optimisation | 829 |
Palazzi E., Pistritto F., Reverberi A.P., Fabiano B. | >DOI:
10.3303/CET1439139 |
Economic Pipe Size Selection by Using Graphical Method | 835 |
Kowalski M., Wernik J. | >DOI:
10.3303/CET1439140 |
Cost Benefits Analysis for Waste Heat Utilization in Sinter Cooling Bed | 841 |
Liu Y., Yang J., Cheng Z., Wang J., Wang Q. | >DOI:
10.3303/CET1439141 |
CFD and FEA Boiler Collector Analysis | 847 |
Buzík J., Novácek F., Lošák P. | >DOI:
10.3303/CET1439142 |
Simpli?ed Pressure Drop and Flow Distribution Modelling in Radial Catalytic Converters | 853 |
Turek V., Bébar L., Jegla Z. | >DOI:
10.3303/CET1439143 |
Stability Analysis of Symbiotic Bioenergy Parks | 859 |
Ng R.T.L., Wan Y.K., Ng D.K.S., Tan R.R. | >DOI:
10.3303/CET1439144 |
Practical Approach for Engineers to Optimise Industrial Ovens for Energy Saving | 865 |
Pask F., Sadhukhan J., Lake P., McKenna S., Perez E., Yang A. | >DOI:
10.3303/CET1439145 |
Calculation of the Rectification Column Network for the Criterion of the Minimum Exergy Loss | 871 |
Markowski M. | >DOI:
10.3303/CET1439146 |
E-learning,
E-teaching and E-knowledge
|
|
Swiss-energyscope.ch: a Platform to Widely Spread Energy Literacy and Aid Decision-making | 877 |
Moret S., Girončs V.C., Maréchal F., Favrat D. | >DOI:
10.3303/CET1439147 |
CFD
and Numerical Heat Transfer
|
|
Framework of Coherent Structure Method (csm) for LES Simulation of Isothermal and Reacting Swirling Flows | 883 |
Perkovic L., Priesching P., Bogensperger M., Duic N. | >DOI:
10.3303/CET1439148 |
Numerical Analysis of Heat Transfer in Radiant Section of Fired Heater with Realistic Imperfect Geometry of Tube Coil | 889 |
Jegla Z., Hájek J., Vondál J. | >DOI:
10.3303/CET1439149 |
Study on Heat Transfer and Pressure Drop Performances of Airfoil-shaped Printed Circuit Heat Exchanger | 895 |
Li L., Ma T., Xu X., Zeng M., Wang Q. | >DOI:
10.3303/CET1439150 |
CFD Assisted Scale Up of a Rotating Drum Leaching Reactor | 901 |
Egedy A., Fogarasi S., Varga T., Imre-Lucaci Á., Chován T. | >DOI:
10.3303/CET1439151 |
Numerical Flow Field Prediction Downstream of Axial Guide Vane Swirl Generator | 907 |
Vondál J., Hájek J. | >DOI:
10.3303/CET1439152 |
On the Applicability of Rans-turbulence Models in CFD Simulations for the Description of Turbulent Free Jets During Biomass Combustion | 913 |
Miltner M., Jordan C., Harasek M. | >DOI:
10.3303/CET1439153 |
Modelling and Research of Heat Transfer in Fins of the Pneumatic Pulsator | 919 |
Wernik J., Wolosz K.J. | >DOI:
10.3303/CET1439154 |
Sustainable
Biofuel Production
|
|
Waste-to-wealth: Energy Pack as an Integrated Biofuel | 925 |
Ng W.P.Q., Lam H.L., Yusup S. | >DOI:
10.3303/CET1439155 |
Heat-integrated Novel Process of Liquid Fuel Production from Bioresources – Process Simulation and Costing Study | 931 |
Gürsel I.V., Wang Q., Noël T., Kolb G., Hessel V., van Veen A.C. | >DOI:
10.3303/CET1439156 |
Metallic Sn- and Sno2-doped Sapo-34 as Model Catalysts for Investigating the Effect of Oxidation States on Bio-ethanol Dehydration Products | 937 |
Chinniyomphanich U., Jitkarnka S. | >DOI:
10.3303/CET1439157 |
Design and Fabrication of Bench-scale Flash Pyrolysis Reactor for Bio-fuel Production | 943 |
Alias N., Ibrahim N., Hamid M.K.A., Hasbullah H. | >DOI:
10.3303/CET1439158 |
A Study on the Combustion Dynamics of a Biomass Fuel Bed in a Biograte Boiler | 949 |
Boriouchkine A., Sharifi V., Swithenbank J., Jämsä-Jounela S.L. | >DOI:
10.3303/CET1439159 |
A Heuristic Framework for Inherent Occupational Health Assessment in Chemical Process Design | 955 |
Ng R.T.L., Hassim M.H., Hurme M. | >DOI:
10.3303/CET1439160 |
Dynamic Simulation of the Steam Reforming of Methane for the Production of Hydrogen in a Catalytic Fixed Bed Membrane Reactor | 961 |
Silva J.D. | >DOI:
10.3303/CET1439161 |
Bio-ethanol Dehydration to Hydrocarbons Using Ga2o3/beta Zeolites with Various Si/al2 Ratios | 967 |
Sujeerakulkai S., Jitkarnka S. | >DOI:
10.3303/CET1439162 |
Assessment of Sweet Sorghum as a Feedstock for a Dual Fuel Biorefinery Concept | 973 |
Weinwurm F., Theuretzbacher F., Drljo A., Leidinger D., Wannasek L., Bauer A., Friedl A. | >DOI:
10.3303/CET1439163 |
Robust Kinetic Modelling of Heterogeneously Catalyzed Free Fatty Acids Esterification in (monophasic Liquid)/solid Packed-bed Reactor: Rival Model Discrimination | 979 |
Galli F., Corbetta M., Pirola C., Manenti F. | >DOI:
10.3303/CET1439164 |
Comparison of Sweepgas and Vacuum Membrane Distillation as In-situ Separation of Ethanol from Aqueous Solutions | 985 |
Rom A., Strommer M., Friedl A. | >DOI:
10.3303/CET1439165 |
Investigation of Storage Stability of Gas Oils Containing Waste Originated Biodiesel | 991 |
Pölczmann G., Tóth O., Beck Á, Hancsók J. | >DOI:
10.3303/CET1439166 |
Academician
V.V. Kafarov 100 years Anniversary
|
|
Study on Spray Drying for the Production of High Value Particles | 997 |
Golman B., Julklang W. | >DOI:
10.3303/CET1439167 |
Development and Implementation of Methods of Cybernetics in Technologies of Chemical Reagents and High Purity Substances | 1003 |
Bessarabov A. | >DOI:
10.3303/CET1439168 |
Computation of the Solid Catalyzed Gas Phase Reactions with a Simultaneous Choice of the Scheme of the Reactions for Different Composition of the Initial Reaction Mixture | 1009 |
Gartman T.N., Sovetin F.S., Proskuro E.A., Shvets V.F., Kozlovskiy R.A., Suchkov Y.P., Sapunov V.N., Loktev A.S., Levchenko D.A., Dedov A.G. | >DOI:
10.3303/CET1439169 |
Modelling the Dynamical Regimes of Mass Transfer in Cascades of Through-reactors | 1015 |
Kalbayeva A., Kurakbayeva S., Zhidebayeva A., Musrepova E. | >DOI:
10.3303/CET1439170 |
Process
Integration for Sustainable Development
|
|
Designing Optimal Water Networks for the Appropriate Economic Criteria | 1021 |
Pintaric Z.N., Ibric N., Ahmetovic E., Grossmann I.E., Kravanja Z. | >DOI:
10.3303/CET1439171 |
Application of Area-wide Pinch Technology to a Large Industrial Area in Thailand | 1027 |
Matsuda K., Hirochi Y., Kurosaki D., Kado Y. | >DOI:
10.3303/CET1439172 |
Study on a Proton Exchange Membrane Fuel Cell System Fuelled by a Mixture of Bio-ethanol and Methane | 1033 |
Arpornwichanop A., Suwanmanee U., Saebea D., Patcharavorachot Y., Authayanun S. | >DOI:
10.3303/CET1439173 |
Multi-scale Simulation of Propane Aromatization as a Recovery Process in the Microalgae-to-oil Conversion | 1039 |
Corbetta M., Manenti F., Linan L.Z., Lima N.M.N., Rossi F., Papasidero D. | >DOI:
10.3303/CET1439174 |
A Graphical Method for Simultaneous Targeting and Design of Multiple Utility Systems | 1045 |
Wan Alwi S.R., Manan Z.A., Chezghani M. | >DOI:
10.3303/CET1439175 |
Process Integration Analysis for Innovative Environmentally Friendly Recovery and Pre-treatment of Steel Scrap | 1051 |
Porzio G.F., Colla V., Fornai B., Vannucci M., Larsson M., Stripple H. | >DOI:
10.3303/CET1439176 |
A Pinch-based Approach for the Synthesis of Chilled Water Network | 1057 |
Foo D.C.Y., Ng D.K.S., Chew I.M.L., Lee J.Y. | >DOI:
10.3303/CET1439177 |
Evaluation of Energy Aspects in Residential Buildings | 1063 |
Krídlová Burdová E., Vilceková S. | >DOI:
10.3303/CET1439178 |
Evaluating the Potential of a Process Site for Waste Heat Recovery | 1069 |
Oluleye G., Jobson M., Smith R., Perry S. | >DOI:
10.3303/CET1439179 |
Energy
Saving Technology
|
|
Hybrid Membrane-distillation Separation Processes | 1075 |
Etoumi A., Jobson M., Emtir M. | >DOI:
10.3303/CET1439180 |
Thermo-economic Modelling and Process Integration of Co2-mitigation Options on Oil and Gas Platforms | 1081 |
Nguyen T.V., Tock L., Breuhaus P., Maréchal F., Elmegaard B. | >DOI:
10.3303/CET1439181 |
Data Reconciliation with Gross Error Detection Using NLP for a Hot-oil Heat Exchanger | 1087 |
Kongchuay P., Siemanond K. | >DOI:
10.3303/CET1439182 |
A Hierarchical Approach for Evaluation of Waste Heat Utilization Opportunities | 1093 |
Oluleye G., Jobson M., Smith R. | >DOI:
10.3303/CET1439183 |
Heat Exchanger Network Design Considering the Heat Pump Performance | 1099 |
Yang M., Feng X., Liu G. | >DOI:
10.3303/CET1439184 |
The Impact of Alternative Heat Supply Options on CO2 Emission and District Heating System | 1105 |
Mashatin V., Link S., Siirde A. | >DOI:
10.3303/CET1439185 |
CO2 Minimisation
and Mitigation
|
|
Optimisation of Pressure Swing Adsorption (psa) Process for Producing High Purity CO2 for Sequestration Purposes | 1111 |
Sharma I., Hoadley A., Mahajani S.M., Ganesh A. | >DOI:
10.3303/CET1439186 |
Utilization of Emissions of CO2 by Production of Mineral Fertilizers | 1117 |
Mingaleeva G.R., Nikolaev A.N., Shamsutdinov E.V. | >DOI:
10.3303/CET1439187 |
Combined
Heat and Power, Combined Cycles
|
|
Model Predictive Control Strategies for Low-voltage Microgrids | 1123 |
Menon R.P., Paolone M., Maréchal F. | >DOI:
10.3303/CET1439188 |
Heat
Exchangers as Equipment and Integrated Items
|
|
Experimental Investigation of the Heat Transfer in a Feedwater Preheater for the Decarbonizing Steam Generator | 1129 |
Kolonicný J., Kupka D., Jandacka J. | >DOI:
10.3303/CET1439189 |
Integration
of Renewables, Biomass and Energy Conversion Technologies
|
|
Techno-economic Assessment of FT Unit for Synthetic Diesel Production in Existing Stand-alone Biomass Gasification Plant Using Process Simulation Tool | 1135 |
Hunpinyo P., Narataruksa P., Tungkamani S., Chollacoop N., Che-Ali P. | >DOI:
10.3303/CET1439190 |
Methodology for Identification of Suitable Orc-cycle and Working-fluid Using Integration with Multiple Objectives | 1141 |
Bendig M., Favrat D., Maréchal F. | >DOI:
10.3303/CET1439191 |
Thermal Integration of Different Plant Configurations of Sugar and Ethanol Production from Sugarcane | 1147 |
Pina E.A., Palacios-Bereche R., Chavez-Rodrigues M.F., Ensinas A.V., Modesto M., Nebra S.A. | >DOI:
10.3303/CET1439192 |
Biomass-photovoltaic Hybrid Plant for Hydrogen Production via Steam Electrolysis | 1153 |
Sanz A., Dufour J. | >DOI:
10.3303/CET1439193 |
Co-processing of FCC Light Cycle Oil and Waste Animal Fats with Straight Run Gas Oil Fraction | 1159 |
Baladincz P., Szepesi M., Hancsók J. | >DOI:
10.3303/CET1439194 |
Simulation of a Diesel Engine Operating with Ethanol to Reduce Pollutant Emissions | 1165 |
Sodré J.R., de Souza Brito R.T., de Oliveira A., de Morais A.M. | >DOI:
10.3303/CET1439195 |
Study of Cashew Nut Shells Valorisation by Gasification | 1171 |
Diedhiou A., Bensakhria A., Ndiaye L.G., Khelfa A., Sock O. | >DOI:
10.3303/CET1439196 |
Enhancement of Hydrogen Production for Steam Reforming of Biogas in Fluidized Bed Membrane Reactor | 1177 |
Saebea D., Authayanun S., Patcharavorachot Y., Arpornwichanop A. | >DOI:
10.3303/CET1439197 |
Clean
Technologies - Low Emissions Technologies
|
|
Simulation of Perovskite Membrane for Integration Into a Chemical Looping Air Separation Unit | 1183 |
Paymooni K., Doroodchi E., Moghtaderi B. | >DOI:
10.3303/CET1439198 |
The Biocrack Process - a Refinery Integrated Biomass-to-liquid Concept to Produce Diesel from Biogenic Feedstock | 1189 |
Ritzberger J., Pucher P., Schwaiger N., Siebenhofer M. | >DOI:
10.3303/CET1439199 |
Roles of Activated Carbon and Tetrahydrofuran on Methane Hydrate Phase Equilibrium | 1195 |
Siangsai A., Rangsunvigit P., Kitiyanan B., Kulprathipanja S. | >DOI:
10.3303/CET1439200 |
Effects of Ticl3, Tio2, Zrcl4, and Zro2 on Hydrogen Desorption of Mgh2 and Its Reversibility | 1201 |
Rangsunvigit P., Sridechprasat P., Kitiyanan B., Kulprathipanja S. | >DOI:
10.3303/CET1439201 |
Vanadium-ceria Structured Catalysts for the Selective Partial Oxidation of H2s from Biogas | 1207 |
Palma V., Barba D., Ciambelli P. | >DOI:
10.3303/CET1439202 |
Dissipative Approach to the Calculation of the Diffusion Coefficient of the Aerosol in Turbulent Flows | 1213 |
Shakirova A., Eskendirov M., Syrmanova K., Shakirov B. | >DOI:
10.3303/CET1439203 |
Sustainable
Processing and Production
|
|
Solar-supplied Biomass Gasification for the One-step Synthesis of Methanol and Dimethyl Ether | 1219 |
Manenti F., Leon-Garzon A.R., Rossi F., Ravaghi-Ardebili Z., Pierucci S. | >DOI:
10.3303/CET1439204 |
Conversion of Low Cost Mineral Material to Pozzolana and Its Impact on Cement Parameters and Cost of Production | 1225 |
Gul S., Saeed F., Amin N.U. | >DOI:
10.3303/CET1439205 |
Combustion Optimisation Using Methane Number and Wobbe Index as Evaluation Criteria | 1231 |
Saavedra J., Merino L., Gómez M., Kafarov V. | >DOI:
10.3303/CET1439206 |
Waste
Minimisation, Processing and Management including Waste to Energy
|
|
Cr6+reduction in an Indigenous Mixed Culture of Bacteria in the Presence of As3+ | 1237 |
Igboamalu T.E., Chirwa E.M.N. | >DOI:
10.3303/CET1439207 |
Tertiary Treatment of Wastewater by Phosphorus Precipitation – Pilot Scale Test of Flotation Utilization for Suspension Separation | 1243 |
Houdková L., Cmaradová M., Strnadel P., Chládková H,, Borán J. | >DOI:
10.3303/CET1439208 |
Catalysts for Purification of Waste Gas on the Basis of Natural Zeolites of Kazakhstan | 1249 |
Sadenova M.A., Abdulina S.A., Sapargaliev E.M., Tungatarova S.A. | >DOI:
10.3303/CET1439209 |
Management of Water Consumption in Pulp and Paper Industry – a Case Study Using Water Sources Diagram | 1255 |
Francisco F.D.S., Mirre R.C., Calixto E.E.S., Pessoa F.L.P., Queiroz E.M. | >DOI:
10.3303/CET1439210 |
Thermal
Treatment of Waste including Waste to Energy
|
|
Comparison of Components in Oil Derived from Tyre Pyrolysis with and Without KL Catalyst Using GC × GC / Tof-ms | 1261 |
Pithakratanayothin S., Jitkarnka S. | >DOI:
10.3303/CET1439211 |
Quality Improvement of Waste Tyre Pyroysis Oil by Using Cu/hmor as a Catalyst | 1267 |
Yuwapornpanit R., Jitkarnka S. | >DOI:
10.3303/CET1439212 |
Prediction of Heating Value of Waste and Its Importance for Conceptual Development of New Waste-to-energy Plants | 1273 |
Putna O., Kropác J., Frýba L., Pavlas M. | >DOI:
10.3303/CET1439213 |
Thermostable Polyoxide Catalysts of Complete Combustion of Methane Or Biogas in the Catalytic Heat Generators | 1279 |
Tungatarova S.A., Zheksenbaeva Z.T., Abdukhalykov D.B., Baizhumanova T.S. | >DOI:
10.3303/CET1439214 |
Batch
Processes
|
|
Temperature Control of Batch Suspension Polyvinyl Chloride Reactors | 1285 |
Bárkányi A., Németh S., Lakatos B.G. | >DOI:
10.3303/CET1439215 |
Dynamic,
Flexible and Sustainable Plant Operation
|
|
Control Structure Design and Controllability Analysis for Solid Oxide Fuel Cell | 1291 |
Chatrattanawet N., Skogestad S., Arpornwichanop A. | >DOI:
10.3303/CET1439216 |
Evaluation of CO2 Capture Using Aqueous Ammonia Solution in a Flexible Operation Scenario | 1297 |
Cormos A.M., Morar A., Dinca C. | >DOI:
10.3303/CET1439217 |
Industrial
and Experimental Studies
|
|
Structured Packing Evaluation in Sour Gases Treatment from Kiln Emissions | 1303 |
Chavez R.H., Guadarrama J.J. | >DOI:
10.3303/CET1439218 |
Removal of Pollutants from the Air in a Copper-ore Mine Using a Compact Trickle-bed Bioreactor | 1309 |
Kasperczyk D., Urbaniec K., Barbusinski K. | >DOI:
10.3303/CET1439219 |
Increasing the Precision of Thermal Properties Measurement by the Periodic Heating Method | 1315 |
Lyubimova D., Divin A., Ponomarev S. | >DOI:
10.3303/CET1439220 |
The Influence of Bound Nitrogen Content in the Gaseous Fuel on the Formation of NOX | 1321 |
Skryja P., Belohradský P., Hudák I. | >DOI:
10.3303/CET1439221 |
Industrial
Application and Optimal Design
|
|
Optimal Design of Solvent Based Post Combustion CO2 Capture Processes in Quicklime Plants | 1327 |
Damartzis T., Kouneli A., Papadopoulos A.I., Seferlis P., Dimitriadis G., Vlachopoulos G. | >DOI:
10.3303/CET1439222 |
Aromatics Extraction. 1. Extraction Characteristics of Ils for the Toluene/heptane Separation and Equipment Design Aspects | 1333 |
Graczová E., Thomas L., Steltenpohl P. | >DOI:
10.3303/CET1439223 |
Reliability Approach to the Choice of Dimensions and Materials of Tubes Used in Hydrocarbons Transport Networks | 1339 |
Abdelbaki N., Gaceb M., Bouali E., Bettayeb M., Bouzid R. | >DOI:
10.3303/CET1439224 |
Software Tool for Creating and Modifying Parametric Shell and Tube Heat Exchanger Geometry | 1345 |
Létal T. | >DOI:
10.3303/CET1439225 |
CFD
and Numerical Heat Transfer
|
|
Computational Fluid Dynamics Investigation of Air Cooled Heat Exchangers | 1351 |
Osley W.G., Drögemüller P., Ellerby P., Gibbard I. | >DOI:
10.3303/CET1439226 |
Infrared Thermography and CFD Analysis of Hydrocarbon Jet Fires | 1357 |
Zárate L.G., Lara H.E., Cordero M.E., Kozanoglu B. | >DOI:
10.3303/CET1439227 |
Heat Generation Calculation on the Basis of Numerical Simulation Results of Supersonic Airflow in a Nozzle | 1363 |
Wernik J., Wolosz K.J. | >DOI:
10.3303/CET1439228 |
Applications of CFD Techniques in the Design of Fabric Filters | 1369 |
Rocha S.M.S., Marques F.B., Pereira F.A.R., Ribeiro D.C. | >DOI:
10.3303/CET1439229 |
Sustainable
Biofuel Production
|
|
Distillate Range of Hydrocarbon Production from Bio-ethanol Dehydration Using Hy, Hbeta, and Hzsm-5 as Supports of Phosphorus Oxide | 1375 |
Kittikarnchanaporn J., Pairojpiriyakul T., Boonphayoong T., Jitkarnka S. | >DOI:
10.3303/CET1439230 |
Different Pathways to Preserve the Sulphid State of the Catalyst During the Hydroprocessing of Triglycerides | 1381 |
Tóth C., Sági D., Hancsók J. | >DOI:
10.3303/CET1439231 |
Investigation of Quality Improving of Waste Origin Bio-paraffins | 1387 |
Solymosi P., Varga G., Hancsók J. | >DOI:
10.3303/CET1439232 |
Selected
EC Project results
|
|
Hytime – Combined Biohydrogen and Biogas Production from 2nd Generation Biomass | 1393 |
Drljo A., Wukovits W., Friedl A. | >DOI:
10.3303/CET1439233 |
A New Steam Turbine Model for Utility System Design and Optimization | 1399 |
Sun L., Smith R. | >DOI:
10.3303/CET1439234 |
The Development of Heat Substation for Drying Waste Heat Utilization | 1405 |
Gariev A.O., Klemeš J.J., Kusakov S.K., Tovazhnyansky L.L., Anokhin P., Kapustenko P.O., Arsenyeva O.P., Cucek L. | >DOI:
10.3303/CET1439235 |
A Methodical Approach for Energy Efficiency Analysis Based on Existing Process Models | 1411 |
Bohnenstaedt T., Fieg G. | >DOI:
10.3303/CET1439236 |
A New Absorption-desorption Pilot Plant for CO2 Capture | 1417 |
Hüser N., Kenig E.Y. | >DOI:
10.3303/CET1439237 |
Process Integration for Bromine Plant | 1423 |
Boldyryev S., Varbanov P.S. | >DOI:
10.3303/CET1439238 |
Process Modification for Capital Cost Reduction in Total Site Heat Integration | 1429 |
Chew K.H., Klemeš J.J., Wan Alwi S.R., Manan Z.A. | >DOI:
10.3303/CET1439239 |
Recent Methods for Retrofitting Heat Exchanger Networks with Heat Transfer Intensifications | 1435 |
Pan M., Bulatov I., Smith R. | >DOI:
10.3303/CET1439240 |
Optimal Design Technologies for Integration of Combined Cycle Gas Turbine Power Plant with CO2 Capture | 1441 |
Pan M., Agulonu A., Gharaie M., Perry S., Zhang N., Bulatov I., Smith R. | >DOI:
10.3303/CET1439241 |
Identification of Process Integration Options for CO2 Capture in Greek Lignite-fired Power Plant | 1447 |
Liew P.Y., Klemeš J.J., Doukelis A., Zhang N., Seferlis P. | >DOI:
10.3303/CET1439242 |
Techno-economic Assessment of Carbon Utilisation Potential in Europe | 1453 |
Pérez-Fortes M., Bocin-Dumitriu A., Tzimas E. | >DOI:
10.3303/CET1439243 |
New
Developments
|
|
Thermo-economic Assessment Tool for Industrial Milk Spray Dryer Exhaust Heat Recovery Systems with Particulate Fouling | 1459 |
Walmsley T.G., Walmsley M.R.W., Atkins M.J., Neale J.R. | >DOI:
10.3303/CET1439244 |
Theoretical Study on the Ethanol-fueled SOFC System Integrated with Dehumidifier | 1465 |
Tippawan P., Assabumrungrat S., Arpornwichanop A. | >DOI:
10.3303/CET1439245 |
Heat Exchanger Network Synthesis on Gas Separation Plant No.2 (gsp2) in Thailand | 1471 |
Angsutorn N., Saikhaw P., Chuvaree R., Siemanond K. | >DOI:
10.3303/CET1439246 |
Energy Evaluation of an Absorption Heat Transformer Operating with Water-carrol Solution by Means of Mathematical Programming | 1477 |
Sánchez-Martínez J.R., Martínez A.R., Romero R.J., Ibarra–Bahena J., Ponce-Ortega J.M., Serna-González M. | >DOI:
10.3303/CET1439247 |
Utilizing Solar Energy in Order to Reduce Energy Loads of Building | 1483 |
Kušnír M., Vranay F., Košicanová D., Vranayová Z., Kapalo P., Gavlík M. | >DOI:
10.3303/CET1439248 |
Numerical Investigation of the Air Flow in a Novel Pv-trombe Wall Based on CFD Method | 1489 |
Su Y., Zhao B., Xu X. | >DOI:
10.3303/CET1439249 |
Carbon Sources Diagram - a Tool for Carbon-constrained Energy Sector Planning | 1495 |
Francisco F.D.S., Pessoa F.L.P., Queiroz E.M. | >DOI:
10.3303/CET1439250 |
Multi-objective Optimisation of Hybrid CO2 Capture Processes Using Exergy Analysis | 1501 |
Fong J.C.L.Y., Anderson C., Hooper B., Xiao G., Webley P.A., Hoadley A. | >DOI:
10.3303/CET1439251 |
Green Energy Strategy 2050 for Latvia: a Pathway Towards a Low Carbon Society | 1507 |
Blumberga D., Cimdina G., Timma L., Blumberga A., Roša M. | >DOI:
10.3303/CET1439252 |
Increasing Economic Benefits by Load-shifting of Electrical Heat Pumps | 1513 |
Laveyne J.I., Zwaenepoel B., Van Eetvelde G., Vandevelde L. | >DOI:
10.3303/CET1439253 |
Extraction Process in the Ethanol Production from Sugarcane – a Comparison of Milling and Diffusion | 1519 |
Palacios-Bereche R., Ensinas A.V., Modesto M., Nebra S.A. | >DOI:
10.3303/CET1439254 |
The Effect of Birch-bark Addition on the Elemental Composition and Combustion Characteristics of Different Types of Biomass Pellets | 1525 |
Barmina I., Zake M., Valdmanis R., Arshanitsa A., Solodovnik V., Telysheva G. | >DOI:
10.3303/CET1439255 |
Electric Field-induced Variations of Combustion Dynamics | 1531 |
Barmina I., Zake M., Valdmanis R. | >DOI:
10.3303/CET1439256 |
Life Cycle Optimisation of a Sustainable Sago Value Chain | 1537 |
Wan Y.K., Ng R.T.L., Ng D.K.S., Tan R.R. | >DOI:
10.3303/CET1439257 |
The Simulated Effect of Defoliation in the Growth of the Eucalyptus Grandis | 1543 |
Oliveira M.A., Castro Della Lucia T.M., Della Lucia R.M., Anjos N., Silva Araujo M., Leite B.S. | >DOI:
10.3303/CET1439258 |
Methods for Evaluating the Influence of Large-scale Effect on Heat and Mass Efficiency of Chemical Apparatuses | 1549 |
Musabekova L., Dausheyeva N., Zhumataev N., Jamankarayeva M. | >DOI:
10.3303/CET1439259 |
Synthesis of Alkali Activated Cement from Local Clay and Its Characterization | 1555 |
Amin N.U., Alam S., Gul S. | >DOI:
10.3303/CET1439260 |
The Industrial Production of Dimethyl Carbonate from Methanol and Carbon Dioxide | 1561 |
de Groot F.F.T., Lammerink R.R.G.J., Heidemann C., van der Werff M.P.M., Garcia T.C., van der Ham L.A.G.J., van den Berg H. | >DOI:
10.3303/CET1439261 |
Simultaneous Production of Hydrogen and Methane from Cassava Wastewater Using a Two Stage Upflow Anaerobic Sludge Blanket System Under Thermophilic Operation | 1567 |
Intanoo P., Gulari E., Chavadej S. | >DOI:
10.3303/CET1439262 |
Fractionation of Bio-oil from Flash Pyrolysis | 1573 |
Vasilkovová B., Augustínová J., Buzetzki E., Cvengroš J., Mikulec J., Kubinec R., Blaško J. | >DOI:
10.3303/CET1439263 |
Biotransformation of Biodegradable Solid Wastes Into Organic Fertilizers Using Composting Or/and Vermicomposting | 1579 |
Wu T.Y., Lim S.L., Lim P.N., Shak K.P.Y. | >DOI:
10.3303/CET1439264 |
Optimal Synthesis of Ethylene Production Process | 1585 |
Khor C.S., Lee T.F., Nhlapo D., Lau K.K. | >DOI:
10.3303/CET1439265 |
Black Smoke Assessment of Low Pressure Flare in South Pars Gas Field Off-shore Platform Based on FLARENET Simulation and Flied Experiences | 1591 |
Deilamani K.S., Rajabi M. | >DOI:
10.3303/CET1439266 |
Optimization Strategy of Polycyclic Aromatic Hydrocarbon Contaminated Media Bioremediation Through Biosurfactant Addition | 1597 |
Bezza F.A., Chirwa E.M.N. | >DOI:
10.3303/CET1439267 |
The Potential Use of Natural Coagulants and Flocculants in the Treatment of Urban Waters | 1603 |
Teh C.Y., Wu T.Y. | >DOI:
10.3303/CET1439268 |
Application of Innovative Processes for the Valorisation of Spent Alkaline Batteries | 1609 |
Ubaldini S., Kadukova J., Mrazikova A., Fornari P., Luptakova A., Marcincakova R., Pizzichemi P. | >DOI:
10.3303/CET1439269 |
Modelling and Simulation of MSF Desalination Plant: the Effect of Venting System Design for Non-condensable Gases | 1615 |
Alsadaie S.M., Mujtaba I.M. | >DOI:
10.3303/CET1439270 |
Study of the Influence of Reutilization of Ionic Liquid for Lignin Extraction | 1621 |
Prado R., Erdocia X., Labidi J. | >DOI:
10.3303/CET1439271 |
A Sustainable Production of H2 by Water Splitting and Photo-reforming of Organic Wastes on Au/tio2 Nanotube Arrays | 1627 |
Ampelli C., Genovese C., Lanzafame P., Perathoner S., Centi G. | >DOI:
10.3303/CET1439272 |
Co-gasification of Rice Production Wastes | 1633 |
André R.N., Pinto F., Miranda M., Carolino C., Costa P. | >DOI:
10.3303/CET1439273 |
Study of the Experimental Conditions of the Co-pyrolysis of Rice Husk and Plastic Wastes | 1639 |
Costa P., Pinto F., Miranda M., André R.N., Rodrigues M. | >DOI:
10.3303/CET1439274 |
Acquisition of Operational Data in Industrial Laundry Facilities | 1645 |
Kuba P., Bobák P., Máša V., Vondra M. | >DOI:
10.3303/CET1439275 |
Siemens-reactor’s High-frequency Power Supply | 1651 |
Kozin K.A., Goryunov A.G., Manenti F. | >DOI:
10.3303/CET1439276 |
Techno-economic Evaluation of Quality Improvement of Heavy Gas Oil with Different Processes | 1657 |
Varga Z., Eller Z., Hancsók J. | >DOI:
10.3303/CET1439277 |
Asphaltene Precipitation in Algerian Oilfields: Experimental Investigation and Field Mitigation | 1663 |
Eutamene M., Mouloudj N., Meniai A.H., Djema H., Khodja M. | >DOI:
10.3303/CET1439278 |
Particle Cycle Times in Draft Tube Conical Spouted Beds | 1669 |
Estiati I., Altzibar H., Olazar M. | >DOI:
10.3303/CET1439279 |
Application of Interval Analysis to the Reconciliation of Process Data When Models Subject to Uncertainties are Used | 1675 |
Vocciante M., Mantelli V., Aloi N., Reverberi A.P., Dově V.G. | >DOI:
10.3303/CET1439280 |
Modelling Dispersive Mixing of the Ingredients of Rubber Compounds | 1681 |
Suigenbayeva A., Brener A., Sabyrkhanov D., Sakibayeva S. | >DOI:
10.3303/CET1439281 |
Minimization of Off-grade Production in Multisite Multiproduct Plants by Solving Multiple Traveling Salesman Problem | 1687 |
Király A., Farsang B., Chován T., Christidou M., Karlopoulos E., Abonyi J. | >DOI:
10.3303/CET1439282 |
E-chemistry, Next Step | 1693 |
Dumitrescu A.M., Josceanu A.M., Postelnicescu P., Isopescu R.D., Plesu V., Ghindescu-Negura F. | >DOI:
10.3303/CET1439283 |
CFD Simulation for the Pasteurization of Fruit Puree with Pieces | 1699 |
D’Addio L., Di Natale F., Budelli A., Nigro R. | >DOI:
10.3303/CET1439284 |
Simulation of Reactive Distillation Column for Biodiesel Production at Optimum Conditions | 1705 |
Karacan S., Karacan F. | >DOI:
10.3303/CET1439285 |
Analysis of the Performance of Membrane Ultrafiltration in the Biorefinery by Aspen Plus® Simulation | 1711 |
Alriols M.G., García A., Muńoz V., Serrano L., Labidi J. | >DOI:
10.3303/CET1439286 |
Efficiency Analysis of Advanced G Class Gas Turbine Feed with Synthetic Natural Gas (sng) and Mixture Gas of Syngas and SNG | 1717 |
Chen P.-C., Chiu H.-M., Chyou Y.-P. | >DOI:
10.3303/CET1439287 |
Hydrogen and Methane Production from Biodiesel Wastewater with Added Glycerine by Using Two-stage Anaerobic Sequencing Batch Reactor (asbr) | 1723 |
Tangkathitipong P., Intanoo P., Chavadej S. | >DOI:
10.3303/CET1439288 |
Relating Bread Baking Process Operating Conditions to the Product Quality: a Modelling Approach | 1729 |
Papasidero D., Manenti F., Corbetta M., Rossi F. | >DOI:
10.3303/CET1439289 |
Optical and Numerical Analysis of Droplet Breakup | 1735 |
Jordan C., Maier C., Harsfalvi Z., Kiss B., Harasek M. | >DOI:
10.3303/CET1439290 |
Thermo-economic Optimisation of Integrated Ethanol and Methanol Production in the Sugarcane Industry | 1741 |
Albarelli J.Q., Onorati S., Caliandro P., Peduzzi E., Maréchal F., Ensinas A.V. | >DOI:
10.3303/CET1439291 |
Heat Integration Between Plants with Combined Integration Patterns | 1747 |
Wang Y., Feng X., Chang C. | >DOI:
10.3303/CET1439292 |
Biogas Production from Intercropping (syn-energy) | 1753 |
Shahzad K., Maier S., Narodoslawsky M. | >DOI:
10.3303/CET1439293 |
Pollution and Potential Ecological Risk Assessment of Heavy Metals in the Smolnik Creek (slovakia) | 1759 |
Singovszka E., Balintova M. | >DOI:
10.3303/CET1439294 |
Dynamic Optimisation for Environomic Power Dispatch in Microgrids | 1765 |
Deckmyn C., Vandoorn T.L., Moradzadeh M., Vandevelde L. | >DOI:
10.3303/CET1439295 |
Minimum Solvent Flow Rate for Counter-current Liquid-liquid Extraction Columns | 1771 |
Bonet J., Plesu V., Bonet Ruiz A.E., Tuluc A., Llorens J., Iancu P. | >DOI:
10.3303/CET1439296 |
Factors Influencing the Ultrasonic Degradation of Emerging Compounds: ANN Analysis | 1777 |
Capocelli M., Prisciandaro M., Lancia A., Musmarra D. | >DOI:
10.3303/CET1439297 |
On the Comparison and the Synergistic Effect of Chemical AOP and Hydrodynamic Cavitation | 1783 |
Prisciandaro M., Capocelli M., Lancia A., Musmarra D., Rodriguez S., Romero A., Santos A. | >DOI:
10.3303/CET1439298 |
Using Experimental Measurements the Concentrations of Carbon Dioxide for Determining the Intensity of Ventilation in the Rooms | 1789 |
Kapalo P., Vilceková S., Voznyak O. | >DOI:
10.3303/CET1439299 |
Integration of Supercritical Water Gasification in Combined 1g/2g Ethanol Production | 1795 |
Mian A., Albarelli J.Q., Ensinas A.V., Maréchal F. | >DOI:
10.3303/CET1439300 |
The Performance of Alternative Refrigerant Gas R152a as Mobile Air Conditioning Refrigerant | 1801 |
Bilen K., Kalkisim A.T., Solmus I. | >DOI:
10.3303/CET1439301 |
Optimization of an Activated Carbon Adsorber for Cadmium Removal in Wastewater | 1807 |
Di Natale F., La Motta F., Erto A., Lancia A. | >DOI:
10.3303/CET1439302 |
Efficient Transshipment-based Framework for Energy Targeting and Retrofitting Industrial Total Sites | 1813 |
Cucek L., Kravanja Z. | >DOI:
10.3303/CET1439303 |
Data Acquisition and Analysis of Total Sites Under Varying Operational Conditions | 1819 |
Cucek L., Yong J.Y., Mantelli V., Vocciante M., Varbanov P.S., Klemeš J.J., Karlopoulos E., Kravanja Z. | >DOI:
10.3303/CET1439304 |